Resistex Miks LED Downlight
Installation and Safety Instructions for Adjustable, Low Luminance Fixture
Safety Notes
Never work on the luminaire when it is live.
Installation must be performed by a professional installer in compliance with electrical installation standards and regulations.
Risk of electrostatic discharges (ESD Norm). Handle with necessary precautions. [Caution symbol] Handle with necessary precautions.
Please observe the notes and steps described in the mounting instructions.
Maintenance Instructions
Do not use chemical or abrasive products for cleaning the fixture.
Keep these instructions for dismantling or future maintenance. Additional information about RESISTEX luminaires is available on the website: www.resistex-sa.com.
RESISTEX cannot be held responsible for any misuse of the product.
Installation Guide
Follow these steps for proper installation:
Step 1: Prepare Ceiling Opening
Cut a circular opening in the ceiling with a diameter of Ø69mm (+/-1mm).
Step 2: Insert Fixture
Insert the luminaire into the prepared ceiling opening. [Up arrow]
Step 3: Secure Fixture
Rotate the fixture to secure it in place. [Rotation arrow]
Step 4: Electrical Connection
Connect the electrical supply wires to the luminaire's connector block.
Wiring Terminals:
- L: Live connection
- N: Neutral connection
- [Ground symbol]: Earth connection (if applicable)
Connecting Wires:
Open the connector terminals. [Open terminal clamp]
Insert the corresponding wires (Live, Neutral, Earth) into their respective terminals. [Wire insertion symbol]
Close the connector terminals securely. [Close terminal symbol]
Step 5: Final Seating
Push the luminaire firmly into the ceiling recess until it is flush.
Step 6: Verification
Ensure correct wiring. The diagram indicates correct connection (✔️) versus incorrect connection (❌).
Step 7: Final Appearance
The luminaire is now installed and flush with the ceiling.
Company Details
RESISTEX EXPLOITATION
Address: 11 Quai de la Banquière CS 80010, 06730 Saint-André-de-la-Roche - France
Contact: Tel: +33 4 93 276 276 | Fax: +33 4 93 276 280 | Email: contact@resistex-sa.com
Website: www.resistex-sa.com
Certifications and Specifications
ROHS Compliant | Class II Electrical Safety | IP65 Ingress Protection | IK07 Impact Resistance | 5 Year Warranty | CE Marked