Resistex Miks Recessed LED Downlight

Installation Guide

Model: Miks (Part Number: 963253)

Version: V1.1 - 09.22

Product Features & Options

Adjustable Orientation: Diagrams show a recessed light fixture and a separate trim ring, illustrating how the trim ring can be attached or adjusted to change the fixture's orientation.

Low Light Output: Diagrams illustrate the recessed light fixture, possibly indicating different light distribution patterns or beam angles for low light applications.

Safety Instructions

⚠️ Never work when voltage is present on the luminaire.

The installation must be performed by a professional installer in compliance with the standards and regulations relating to electrical installations.

⚡ Risk of electrostatic discharges (ESD Norm). Handle with precautions.

Please observe the notes and steps described in the mounting instructions.

Maintenance Instructions

? Do not use chemicals or abrasives products to clean the fixture.

Keep these instructions for dismantling or future maintenance. You can consult additional information about RESISTEX luminaires on the website www.resistex-sa.com.

RESISTEX cannot be responsible for any misuse of the product.

Installation Instructions

Follow these steps carefully for correct installation.

Step 1: Prepare the Ceiling Cutout
Diagram showing a circular template with dimensions Ø69 mm (+/- 1mm) and a label 'OFF'.
Ensure the power is OFF. Prepare a ceiling cutout with a diameter of 69 mm (+/- 1mm).
Step 2: Insert the Fixture
Diagram showing a recessed light fixture being inserted upwards into a ceiling cutout.
Insert the recessed light fixture into the prepared ceiling cutout.
Step 3: Secure the Fixture
Diagram showing the fixture being rotated to secure it within the ceiling.
Rotate the fixture to secure it in place within the ceiling.
Step 4: Connect the Wiring
Close-up diagram of an electrical connector with wires being pushed in and a locking mechanism.
Connect the electrical wiring using the provided connector.
Step 5: Open Terminal Block
Diagram showing an open terminal block with slots for wires.
Open the terminal block to prepare for wire insertion.
Step 6: Insert Wires
Diagram showing wires being inserted into the terminal block slots.
Insert the electrical wires into the appropriate terminal block slots.
Step 7: Terminal Block Connections
Diagram of the terminal block showing 'L' (Live) and 'N' (Neutral) terminals, with wires connected.
Connect the Live (L) and Neutral (N) wires to the corresponding terminals. Ensure proper connection for safety.
Step 8: Extend Mounting Clips
Diagram showing the recessed light fixture with spring-loaded mounting clips extended outwards.
Extend the spring-loaded mounting clips outwards from the fixture body.
Step 9: Final Securing and Connection Check
Diagram showing the fixture being pushed into the ceiling, with the spring clips bending inwards to secure it. Includes a visual comparison: a green checkmark next to a correctly wired connection and a red cross next to an incorrectly wired connection.
Push the fixture into the ceiling; the spring clips will engage to hold it firmly. Verify the electrical connections are correct (indicated by a green checkmark ✔️) and not incorrect (indicated by a red cross ❌).
Step 10: Installation Complete
Diagram showing the fully installed recessed light fixture flush with the ceiling surface.
The installation is now complete, with the fixture flush against the ceiling.

Product Specifications & Certifications

Product Type: Recessed LED Downlight

Model Name: Miks

Part Number: 963253

Lumen Output: 894 lm

Certifications: ROHS, Class II, IP65, IK07, CE. Performance indicators: 82 (likely CRI), 5 (likely warranty years).

	Resistex Miks LED Downlight Installation Guide Comprehensive installation, safety, and maintenance instructions for the Resistex Miks LED downlight, featuring adjustable and low luminance options. Includes wiring diagrams and company details.
	Resistex Miks Installation Guide Comprehensive installation instructions for the Resistex Miks lighting fixture, detailing safety precautions, mounting procedures, wiring, and maintenance. Includes product specifications and company information.
	Resistex Miks LED Downlight Installation Guide and Safety Information Comprehensive installation guide for the Resistex Miks LED downlight, detailing safety procedures, maintenance, and step-by-step mounting instructions. Features low luminance and adjustable orientation.
	Resistex MIKS 412lm CCT Black Recessed LED Luminaire - Technical Specifications Detailed technical specifications for the Resistex MIKS 412lm CCT B.LUM RD/RD Black Reflector recessed LED luminaire, including performance data, dimensions, materials, and compliance information.
	Luminaire LED Encastré Resistex MIKS 1043lm CCT B.LUM - Spécifications Techniques Spécifications techniques détaillées pour le luminaire LED encastré étanche Resistex MIKS 1043lm CCT B.LUM RD/RD Noir Réflecteur Blanc. Ce luminaire conforme RT2012/RE2020 offre 1043lm, 11.3W, IP65, et une garantie de 5 ans.
	Luminaire Encastré RESISTEX MIKS 894lm CCT B.LUM CAR/RD NOIR REFLECTEUR NOIR Fiche technique détaillée du luminaire encastré RESISTEX MIKS 894lm CCT B.LUM CAR/RD NOIR REFLECTEUR NOIR. Inclut les spécifications techniques, dimensions, performance lumineuse, et caractéristiques environnementales.
	Resistex MIKS 1043lm CCT B.LUM CAR/RD NOIR REFLECTEUR BLANC - Spécifications Techniques Spécifications techniques détaillées pour le luminaire encastré LED Resistex MIKS 1043lm CCT B.LUM CAR/RD NOIR REFLECTEUR BLANC. Informations sur les dimensions, le flux lumineux, la consommation, l'efficacité, la durabilité et les indices de protection IP65/IK07.
	Resistex MIKS 577lm CCT LED Spotlight - Technical Specifications Detailed technical specifications for the Resistex MIKS 577lm CCT LED spotlight, including lumen output, power consumption, IP/IK ratings, dimensions, and warranty information.