iENYRID ES10 Electric Scooter User Manual
Note: Please read the user manual before use.
Cautions
- Please look for the iENYRID brand when purchasing.
- If you encounter damage or loss during transportation, please contact customer service within 7 days.
- iENYRID is not responsible for the loss caused by improper personal operation or unauthorized modification as required.
- After-sales maintenance is required, please strictly abide by the warranty regulations, fill in the warranty card, and send it back to our maintenance warehouse together with the product.
- Do not use a high-pressure water gun to wash the electric scooter, so as to avoid short circuit of the internal circuit.
- Before traveling, you should check whether the tire pressure is sufficient.
- Obey traffic rules and drive civilized.
- E-mail: support@ienyrid.com
1. Product Introduction
This section introduces the iENYRID ES10 Electric Scooter. It includes a visual representation of the product and lists the included parts.
Included Parts:
- User Manual
- Warranty Card
- Tool Kit
- Charger
Please carefully check whether the items in the packing box are complete and intact. If there is any problem such as missing or damaged, please contact online customer service.
4. Functional Diagram
This diagram illustrates the various components of the iENYRID ES10 Electric Scooter:
- Display
- Brake handle
- Throttle
- Key lock
- Folding buckle
- Front lights
- Fixing buckles
- Shock absorber
- Disc brake
- Off road tire
- Rear motor
- Coloured lights
- Widening pedal
- Seat bag
- Suspension
- Folding buckle
- Rear fender
- Rear lamp
- Spring suspension
5. Safety Instructions
- When encountering deceleration belts, potholes, and other unusual roads, do not pass at high speed. Bend your knees slightly to better adapt to complex pavements.
- It is forbidden for more than one person to drive an electric scooter at the same time or with children.
- Do not accelerate when going downhill. Brake in time to slow down. When you encounter a steep slope, you need to get off the car and push through. Do not ride at risk.
- If you encounter a steep slope when going uphill, do not speed up. Get off and push through, and do not ride at risk.
2. Product Assembly
- Open the carton and take out the product.
- Straighten the frame and fix the buckle.
- Adjust the appropriate height and fix the buckle.
- Secure the vertical base pipe with the fixing buckle.
- Install the seat bag and fix the folding buckle.
- Start the scooter with the key.
3. Learn to Drive
- Please wear head protection, elbow pads, and knee pads. Please read this manual carefully before use.
- Start up and test the LCD Meter and power status.
- Turn the knob to open the accelerator and start riding. Slow down by releasing the throttle.
- Gently hold the brake handle to slow down. Hold the brake handle tightly for emergency braking.
- Triple lighting system: move the red button up and down to adjust between three lighting modes.
- Gear selection: L and H represent two gear speeds. The yellow button is for left and right adjustment, and the green button switches the horn.
