iENYRID M4PRO S+ Electric Scooter User Manual

Catalog

• Packing list
• Product introduction
• Charging method of electric scooter
• Riding method
• Folding and carrying
• Specifications of electric scooter
• Safety instructions
• Safety tips
• Daily care and maintenance

Packing list

Electric Scooter

Accessories:

• Charger
• Toolkit
• User manual

The product is slightly different from the picture. For your safety and the safety of others, please read the instructions before riding.

When using the product, please comply with the laws and regulations in your area. iENYRID is not responsible for any claims, liabilities, or losses that arise or may arise from the consumer's violation of local laws and regulations.

Product introduction

Key Components:

• Brake lever
• Digital display switch with key
• Handlebar Grip
• Headlight switch
• Extension Rod
• Integration Line
• Direction Rod
• Seat
• Front light
• Front Fender
• Front shock absorber
• Pneumatic tyre
• Disc Brake
• Front wheel
• Folding switch
• Silicone anti-slip mat
• Rubber Cover
• Color light
• Charging Port
• Battery compartment
• Seat support
• Seat folding switch
• Rear Fender
• Turn light
• Rear shock absorber
• Taillight
• Pneumatic tyre
• Motor
• Kickstand

Power switch

Handlebar Controls:

• Brake lever
• Folding handle
• Headlight switch
• Turn signal switch
• Horn Switch
• Key
• Handlebar Grip
• Extension rod locking buckle
• Acceleration throttle

Adjustment Tip: For convenience of folding, the collar and shaft may not be fully tightened, resulting in a gap. This is a normal phenomenon and does not affect driving safety. To adjust, turn the threads clockwise to loosen the handle and counter-clockwise to tighten the handle.

Smart Accelerator and Display Dashboard

Display Features:

• Cruise control
• Error code indicator (⚠️)
• Speed display
• Trip distance
• Total distance
• Battery Indicator
• Gear display
• Non-zero start
• Speed indicator (miles/km per hour)
• Power switch
• Gear switch key + function key

Multi-function display area shows: total distance, trip distance, battery voltage, run time, and error code.

Error display

When an error occurs, the meter displays an error code. You can check the E-00X error code by pressing the button a few times.

Error List:

• E-001: Motor error
• E-002: Speed lever error
• E-003: Controller error
• E-004: Brake error
• E-005: Low voltage protection
• E-006: Controller signal not received by display
• E-007: Display signal not received by controller

Charging method of electric scooter

When the LED on the charger changes from red to green, the scooter is fully charged.

Charging Process:

1. Open the plastic cover of the charging port.
2. Insert the charger into the charging port.
3. After charging is complete, cover the plastic cover back.

Riding method

Preparation:

• Wear a helmet, elbow pads, and knee pads when riding. (⚠️)
• Turn on the scooter and check the power indicator.

Instructions:

• Please read the manual carefully before use. Do not touch the brake system.
• For more information, please refer to the instructions.

Riding Posture:

• Stand with feet apart, one foot in front of the other.
• Push off with one foot to start moving.
• Gently press the accelerator to increase speed.
• Use the brake lever to slow down or stop.
• Maintain balance by leaning slightly in the direction of the turn.

Folding and carrying

Follow the numbered diagrams to fold and carry the scooter.

Diagrams illustrate the steps for folding the handlebars, stem, and securing the scooter.

Specifications

Note: Data and specifications may vary depending on the model.

Safety instructions

General Warnings:

• Do not ride in the rain. (⚠️)
• Do not accelerate when going downhill. (⚠️)
• Watch out for doors, elevators, and other overhead obstacles. (⚠️)
• Do not accelerate when pushing. (⚠️)
• Be careful to avoid obstacles. (⚠️)
• Do not hang bags or other heavy objects on the handlebars. (⚠️)
• Do not ride on one foot. (⚠️)
• Keep your speed between 5-10 km/h when crossing speed bumps, tight sections, bumpy roads, or other uneven surfaces.
• Do not ride in the motorway. (⚠️)
• Do not turn your handlebars violently when riding at high speed. (⚠️)
• Do not ride over puddles or any other water obstacle. Reduce your speed and go around the obstacle. (⚠️)
• Do not ride with anyone else (including children). (⚠️)
• Do not put your feet on the rear fender. (⚠️)
• Do not touch the disc brakes. (⚠️)
• Do not take your hands off the handlebars while riding. (⚠️)
• Do not try to go up and down stairs and jump over obstacles. (⚠️)

Safety tips

1. Scooters are intended for riders 16 years of age and older. Do not ride a scooter if you have reduced physical, sensory, or mental abilities. Riders who lack experience or knowledge should drive with caution.
2. This electric scooter is a recreational device. However, when used in a public area, it is considered a vehicle and is subject to risks associated with vehicles. For your safety, please follow the instructions in the manual and the traffic laws set by the government and regulatory agencies.
3. Understand that risks cannot be completely avoided because others may violate traffic laws and drive carelessly. The faster a scooter goes, the longer it takes to stop. On smooth surfaces, scooters may slip, lose their balance, or even cause falls. Therefore, exercise caution and maintain proper speed and distance, especially if you are not familiar with the area.
4. Riding at high speed or in inappropriate conditions (adverse weather, poor ground conditions, etc.) may result in loss of stability or control. To reduce risk, follow all instructions in this user manual. Be careful when folding and unfolding the product, as it can fall and cause injury.
5. Inspect the scooter before each use. If you notice loose parts, low battery alarms, tire leaks, excessive tire wear, strange noises, or other abnormalities, stop riding immediately and seek professional support.
6. When riding, hold the handlebars with both hands to avoid shaking and falling.
7. Always place the scooter on its stand on a flat and stable surface. Do not place the scooter with the front side down, as the stand may close and tip the machine.

Daily care and maintenance

Cleaning and storage

If you see a stain on the scooter body, wipe it with a damp cloth. If the stain doesn't come off, use toothpaste and a toothbrush, then wipe with a damp cloth. For scratches on plastic parts, polish with sandpaper or other abrasive material.

Note:

• Do not use alcohol, gasoline, kerosene, or other corrosive and volatile chemical solvents to clean the scooter, as this may cause serious damage.
• Do not use high-pressure water jets to clean the scooter.
• During cleaning, ensure the scooter is off, unplug the charging cable, and close the rubber cover. Water leakage may cause electric shock or other major problems.

When the scooter is not in use, keep it indoors in a dry and cool place. Do not leave it outside for extended periods. Excessive sunlight, heat, and cold will accelerate tire deterioration and affect the life of the scooter and battery.

Maintenance:

Always charge the battery before it runs out of power to extend its life. The battery performs best at room temperature and less well below 0°C. For example, below -20°C, the riding range is halved. When the temperature rises, the riding range is restored.

The scooter must use the original battery and be charged by the original charging adapter (or a compatible model approved by the manufacturer).

Do not leave the battery in environments with ambient temperatures above 50°C or below -20°C (e.g., do not leave the scooter or battery pack in a sun-drenched vehicle for an extended period).

If the scooter is expected to be idle for more than 30 days, keep the battery fully charged and in a dry, cool place. Recharge the battery every 30 days to protect it from potential damage beyond the limited warranty.