Lochinvar Smart Electric Heat Pump Hybrid Water Heater
Submittal Sheet: HPSA-Sub-04
Submittal Information
This submittal sheet requires project-specific details to be filled in:
- Job Name: [To be filled]
- Location: [To be filled]
- Engineer: [To be filled]
- Agent/Wholesaler: [To be filled]
- Contractor: [To be filled]
- NOTES: [To be filled]
Key Product & Installation Identifiers:
- Model No.: [To be filled]
- Gal. Cap.: [To be filled]
- Voltage/Phase: [To be filled]
- kW: [To be filled]
- Recovery Rate in GPH: [To be filled]
- @ °F Rise: [To be filled]
- Equipment Tag(s): [To be filled]
Standard Features
- Heat Pump with Integrated Elements
- Glass-lined Steel Tank
- LED Display
- Non-CFC Foam Insulation
- iCOMM™ Smart Connectivity
- Leak Protection Technology
- CSA Certified and ASME Rated Temperature & Pressure Relief Valve
- Top and Front Water Connections for Easy Installation
- Brass Drain Valve
- 10 Year Limited Tank and Parts Warranty*
- *1 Year Limited Tank and Parts Warranty When Installed in Commercial Applications
Dimensions and Specifications
The diagram illustrates the physical layout of the Smart Electric Heat Pump Water Heater, indicating dimensions labeled A through F. Water connections are standardized at 3/4" on an 8" centerline.
The model numbering system, such as 'HP SA 080KD DAK', is designed for ease of ordering. This specific example denotes a 208/240 volt residential heat pump model with an 82-gallon capacity and two 1500-watt elements.
| Model Number | Nominal Gal. Cap. | Rated Gal. Cap. | Input Watts | Standard Voltage | 1st Hr. Rating | UEF | A | B | C | D | E | F | Ship Wt. |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HPSA050KD DAK | 50 | 46 | 4500 | 208V/240V | 65 | 3.80 | 63" | 22" | 40.5" | 3.75" | 43.5" | 48" | 196 |
| HPSA065KD DAK | 66 | 67 | 4500 | 208V/240V | 82 | 3.70 | 61.5" | 26.5" | 38.25" | 4" | 41.25" | 46" | 284 |
| HPSA080KD DAK | 80 | 82 | 4500 | 208V/240V | 95 | 3.88 | 69" | 26.5" | 46.5" | 4" | 50.5" | 54.5" | 302 |
Important Notes:
- Water connections are 3/4" on an 8" centerline.
- Condensate draining requires a non-acidic source. If a suitable drain is unavailable, a condensate pump is necessary.
- Power supply requirement: 208/240 VAC, 50/60Hz, single phase, 30 amp.
