Aldes ProtectONE® T TR 450 1V Smoke Extraction Unit
The ProtectONE® TR 450 1V is a smoke extraction unit designed for tertiary and industrial buildings. It is compliant with F400-120 standards and features a belt-driven centrifugal impeller.
Product Overview
The ProtectONE® TR 1V is an F400-120 single-speed smoke extraction unit suitable for tertiary and industrial applications. It is equipped with a belt-driven centrifugal impeller and the exclusive ProtectONE® Adapt system for easy airflow adjustment.
Key Product Advantages:
- Easy airflow adjustment with the ProtectONE® Adapt system.
- Fully demountable as standard (except for insulated models).
- Thermal insulation for installation in technical rooms.
- Reaction impeller for minimal airflow variation with changing pressure losses.
Functioning Principles
Upon command from the Fire Safety Control Panel (CMSI), the ProtectONE®T smoke extraction unit is activated via the relay box to extract smoke. The relay box then switches the unit to 'fault' mode and subsequently to 'standby' mode.
Product Description
The ProtectONE® TR 1V is an F400-120 single-speed smoke extraction unit designed for tertiary and industrial buildings. It features a belt-driven centrifugal impeller and the ProtectONE® Adapt system for simple airflow adjustment in any situation.
Applications
- New construction
- Renovation
- Tertiary buildings
Installation
The unit can be installed indoors or outdoors. For indoor installations, thermal-acoustic insulation (EN 12101-3) is recommended. For outdoor installations, a rain cover and grille are advised. A proximity switch with position contacts is supplied pre-mounted and wired.
Key Features
- CE marking compliant (1812-CPR-1548).
- EFECTIS F400-120 certified according to EN12101-3.
- NF certification for the relay box (NF S61-937-1, NFS61937-9, NF S37).
- Compliant with European eco-design regulation (No. 1253/2014).
- Belt-driven extraction unit (pulley-belt system).
- Available in 8 models with airflow rates from 1,000 to 35,000 m³/h.
- Single-speed motors ranging from 1.1 kW to 22 kW.
- Balanced centrifugal impeller.
- Variable pulley.
- Class F, IP55 electric motor.
- Demountable galvanized steel casing as standard.
- Motor access panel can be repositioned on-site.
- Factory-fitted proximity switch.
- Integrated airflow adjustment system: ProtectONE® Adapt (patented system), exclusive to ALDES (optional).
- The ProtectONE® TR 1V is used for extracting:
- Smoke and hot gases in case of fire in all tertiary buildings.
- Stale air from tertiary and industrial premises.
- Pollutants from professional kitchens.
Complementary Features
- Accessories: square/circular plate for connection to suction, anti-volatile rain cover for discharge, flexible rectangular and circular collar, flexible rectangular/circular discharge transformation, anti-vibration mounts, non-return damper, rain cover + grille, discharge flange, AXONE 1V relay box (single-speed start-up), AXONE 2V relay box (smoke extraction and smoke extraction+comfort).
- Available Options: 'All-in-One' solution (relay box + switch + pressure switch factory-fitted and wired), choice of motor access panel, horizontal or vertical discharge, thermal-acoustic insulation certified 12101-3 for technical room installation, variable pulley, ProtectONE® Adapt (patented system) for rapid airflow adjustment.
Accessories List
Description | Reference |
---|---|
Vertical discharge grille ProtectONE® T 450 | 11039627 |
Flexible connector - Ø 800 | 11096931 |
Anti-vibration support (6 pieces) | 11039348 |
MS RECT SUCTION 450 PROTECTONE T | 11039497 |
MS RECT DISCHARGE 450 PROTECTONE T | 11039565 |
TRANS REC.CIR SUCT D800 450 PROTECTONE T | 11039577 |
PARE-PLUIE.GRILLE 450 PROTECTONE T | 11039587 |
BRIDE REFLT 450 PROTECTONE T | 11039597 |
TRANSFO.SOUPL.REFOUL.450 PROTECTONE T | 11039607 |
ANTI-RET 450 PROTECTONE T | 11039617 |
Options
Description | Reference |
---|---|
Base | 11kW 1P |
ALL IN ONE 1V<13kW | 1V<13KW |
ALL IN ONE 1V<23kW | 1V<23KW |
ALL IN ONE 1V<9kW | 1V<9KW |
Connection flange | BRIDE2 |
Thermal insulation | ISOLB |
Protectone rain cover | PPTATR |
Pressure switch | PRESSD |
Variable pulley | PVAR5 |
Protectone Adapt | VOLET2 |
General Data
Reference | Motor Type | Impeller Type |
---|---|---|
11039537 | AC | Reaction |
Dimensional Data
Reference | A (mm) | A.R (mm) | B (mm) | B.R (mm) | C (mm) | D (mm) | E (mm) | F (mm) | G (mm) | H (mm) |
---|---|---|---|---|---|---|---|---|---|---|
11039537 | 1758 | 40 | 1373 | 650 | 1211 | 954 | 561 | 155 | 1000 | 571 |
Dimensional Enclosure (mm) - Side View
Diagram showing dimensions with labels A, B, C, D, E, F, G, H, M, N, O, A.R, B.R.
Dimensional Enclosure (mm) - Top View
Diagram showing top view dimensions with labels M, N, O, A.R, B.R.
Dimensional Enclosure (mm) - Front View
Diagram showing front view dimensions with labels A, B, O, A.R.
Electrical Data
Reference | Voltage (V) | Max Current (A) | Nominal Current (A) | Id/In | Number of poles | Power (kW) | Electrical Characteristics |
---|---|---|---|---|---|---|---|
11039537 | 400 | 15.5 (2P) / 16.3 (4P) | 14.1 (2P) / 14.8 (4P) | 7.5 (2P) / 7.8 (4P) | 2/4 | 7.5 - 11 | 22.7 (2P) / 23.4 (4P) |
Installation
Diagram showing installation components and steps, including a top view with left access.
Diagram showing top view with right access.
Performance Curves
Graph showing performance curves for the ProtectONE® TR 450 - 1V. The X-axis represents airflow (Q) in m³/h and m³/s. The Y-axis represents total pressure (Ptot) in Pa. Curves are shown for 7.5 kW and 11 kW motor options. Notes indicate curves follow NF EN ISO 5801 standards for connected suction and free discharge. Ptot is total pressure, Pd asp. is dynamic pressure in the duct at suction, and AP rfit connected is the pressure gain with connected discharge instead of free discharge. Reference is made to ProtectONE TA 225 for curve usage.
Regulations & Conformity
PV CE Number: 1812-CPR-1548