ProtectONE® R 21.0 EL 1V: Smoke Extraction Unit
Model Number: 11039279
Product Overview
The ProtectONE® R F400-120 1 Vitesse is a smoke extraction unit designed for commercial and industrial premises. It features a single-speed, direct-driven reaction impeller.
Key Features
- Exclusive ProtectONE® Adapt system for easy flow rate adjustment.
- Fully demountable as standard (except for the insulated model).
- Modular connection for discharge: left, right, or vertical.
- Reaction impeller ensures minimal flow rate variation even with changing pressure losses.
- Thermal insulation for technical room installation, certified according to EN 12101-3.
Functionality
Upon command from the Fire Safety Control Panel (CMSI), the ProtectONE® R smoke extraction unit is activated in smoke extraction mode by the relay control box. The control box then switches it to "fault" mode and subsequently to "standby" mode.
Product Description
The ProtectONE® R 1V is an F400-120 single-speed smoke extraction unit designed for commercial and industrial buildings. It is equipped with a direct-drive reaction impeller. Its exclusive ProtectONE® Adapt adjustment system allows for simple extraction flow rate regulation in all circumstances.
Applications
- New construction
- Renovation projects
- Commercial premises
Installation
- Can be installed indoors or outdoors.
- For indoor installation: option for thermo-acoustic insulation (EN 12101-3) is recommended.
- For outdoor installation: a rain guard visor + grille is required.
- Proximity switch supplied pre-mounted and wired with position contacts.
Main Characteristics
- Compliant with CE marking 1812-CPR-1181.
- Approved EFECTIS F400-120 according to EN12101-3.
- Free-wheel impeller motor compliant with ErP 2018.
- Flow rate from 500 to 21,000 m³/h.
- Class F, IP55 electric motor.
- Three-phase, 1-speed motorization.
- Integrated flow rate adjustment device: ProtectONE® Adapt (patented system), exclusive to ALDES (patented system).
- Centrifugal reaction impeller directly coupled to the motor.
- Thermal insulation for technical room installation.
- Two models available: inline discharge model and 90° discharge model.
Complementary Features
- 10 unit sizes for flow rates from 500 to 21,000 m³/h:
- ProtectONE® R2.0 to ProtectONE® R5.0: Size 1
- ProtectONE® R6.5 to ProtectONE® R9.0: Size 2
- ProtectONE® R10.0 to ProtectONE® R21.0: Size 3
- ProtectONE® R2.0 to ProtectONE® R5.0: Size 1 EL
- ProtectONE® R6.5 to ProtectONE® R9.0: Size 2 EL
- ProtectONE® R10.0 to ProtectONE® R21.0: Size 3 EL
- Available options:
- "All-in-One" solution: includes relay control box, switch, and pressure switch.
- Variable pressure switch 100-1000 Pa (1 pressure switch per smoke extraction speed).
- Choice of discharge position: left/right access on EL model.
- Approved thermal insulation for technical room installation (horizontal or vertical discharge).
Accessories
| Designations | References |
|---|---|
| Flexible rectangular duct connector for aspiration T3 ProtectONE® R EL | 11039180 |
| Flexible rectangular duct connector for discharge T3 ProtectONE® R | 11039183 |
| Non-return damper T3 ProtectONE® R | 11039186 |
| Discharge flange T3 ProtectONE® R | 11039165 |
| Rectangular to circular transformation piece Ø 710 for aspiration T3 ProtectONE® R EL | 11039171 |
| Rectangular to circular transformation piece Ø 710 for discharge T3 ProtectONE® R | 11039174 |
| Pressure switch kit 20-300 Pa ProtectONE® R | 11091097 |
| Anti-vibration mountings 6 pieces | 11039348 |
Options
| Designations | Code |
|---|---|
| Base | base |
| CONNECTION FLANGE | BRIDE |
| INSULATION | ISOLA |
| RAIN GUARD/ANTI-VOLATILE | MANCH |
| PRESSURE SWITCH | PRESS8 |
| ALL-IN-ONE | TOUT4 |
General Data
| References | Motor Type | Impeller Type |
|---|---|---|
| 11039279 | AC | Reaction |
Dimensional Data
Encombrement ProtectONE® R 1V (mm)
Refer to diagram for dimensions A, B, C, D, H, I, L, and weight.
Encombrement ProtectONE® R EL 1V (mm)
Refer to diagram for dimensions.
| References | A (mm) | B (mm) | C (mm) | D (mm) | H (mm) | I (mm) | L (mm) | Flange (mm) | Insulation (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|---|
| 11039279 | 510 | 795 | 795 | 795 | 1020 | 965 | 1430 | I+20 | L+50 H+25 | 236 |
Electrical Data
| References | Voltage (V) | Nominal Current at 230V (A) | Nominal Current at 400V (A) | Number of Poles | Power (kW) | |
|---|---|---|---|---|---|---|
| 11039279 | 230/400 | 7.3 | 18.2 | 10.5 | 4 | 5.5 |
Aerodynamic Characteristics
Aerodynamic Characteristics ProtectONE® R 21.0 - 1V
Refer to the graph for performance curves (Pressure vs. Flow Rate) for ProtectONE R21.0 Max/Min and ProtectONE R21.0 EL Max/Min.
Installation Diagrams
Refer to diagrams for installation details and accessory placement for both the 90° model and the inline discharge EL model.
