EVERBILT
FIXED MOUNT SHELF SUPPORT BRACKETS
FOR USE WITH FIXED MOUNT SHELVING SYSTEM
REQUIRED TOOLS / HERRAMIENTAS REQUERIDAS
Not Supplied / No incluido
- Drill (Taladro)
- Pencil (Lápiz)
- Hammer (Martillo)
- Level (Nivel)
- 0.25 in (0.64 cm)
Supplied / Incluido
- Support Brackets (12)
- Anchors (12)
- Pins (12)
1. Installation Step
Place support bracket 2-3 inches from the shelf end, with a maximum spacing of 36 inches between two brackets. The exact position may vary based on different shelf types.
Available shelf types:
- 16 in (40.64 cm) Fixed Rod Shelf
- 16 in (40.64 cm) Regular Duty Shelf
- 16 in (40.64 cm) Heavy Duty Shelf
2. Drilling Guide
Level the shelf. Use the support bracket as a guide to drill a 1/4 inch hole. Do NOT punch holes directly.
Visual description: A diagram shows a shelf, a support bracket positioned on it, and a drill preparing to make a hole. The drill is depicted as a power tool.
3. Securing the Brackets
Secure the support brackets by pushing the anchors into the drilled holes. Use the end of a hammer handle to assist. Then, push in the pins. If removal is necessary, a slotted screwdriver can be used to pry out the pin.
Visual description: A diagram illustrates the process of inserting an anchor into a hole, using a hammer handle to push it in, and then inserting a pin.
