RainPoint® Smart

1. Contents in the box

The package includes the following items:

• 1 x HTV210B 2-Zone Bluetooth Hose Timer
• 1 x HWG009WB Smart Hub
• 1 x User Manual
• 1 x Sealing Tap
• 1 x Quick Setup Guide
• 1 x Warranty Card

Diagram Description: An illustration shows the RainPoint 2-Zone Bluetooth Hose Timer, the Smart Hub, a folded manual, a roll of sealing tape, a quick setup guide, and a warranty card, each labeled with a number from 1 to 6 corresponding to the list above.

2. Introduction

2.1 Product Overview

The RainPoint system consists of a Bluetooth Hose Timer and a Smart Hub.

Hose Timer Components:

• Filter: Located at the water inlet.
• Water Inlet: Connects to the faucet.
• LED Indicator: Shows device status.
• Timer Button: Used for manual operation and pairing.
• Water Outlet: Connects to the hose.
• Battery Compartment: Houses 4x AA batteries (not included).

Smart Hub Components:

• Button: Used for pairing and reset.
• LED Indicator: Shows device status.
• Power Plug: Connects to a power outlet.

Diagram Description: Two main diagrams illustrate the Hose Timer and the Smart Hub. The Hose Timer diagram shows its connection points (inlet, outlets) and internal components like the battery compartment. The Smart Hub diagram shows its button, LED indicator, and power plug.

2.2 Specification

• Inlet/Outlet Thread: 1" or 3/4" inlet thread and 3/4" outlet thread.
• Operating Water Pressure: 0.5~8 bar (7-116 PSI).
• Watering Duration: 1 min ~ 12 hrs.
• Waterproof Level: IP54.
• Max Plans per Zone: 6.
• Working Temperature: 37°F~122°F (3℃~50℃).
• Communication: Bluetooth 5.0.
• Range: Up to 60m (depending on obstacles between hub and timer).
• Power: 4*AA batteries (not included).

2.3 Features

• Remote control via Bluetooth.
• Review timer action events on the APP.
• Two watering modes: Irrigation Mode or Interval Mode.
• Up to six individual watering plans per zone.
• Two outlets for different area watering needs.
• Can pair with a smart hub.

3. Connection and Installation

3.1 APP Download

To get started, download the RainPoint Smart+ app:

• Search for "RainPoint Smart+" on the Google Play Store or Apple App Store.
• Alternatively, scan the provided QR codes (Note: QR codes are excluded from this HTML output) to download the app for iOS or Android.

After downloading, create an account and log in by following the on-screen prompts using your email or mobile phone.

Diagram Description: Screenshots show the Google Play and App Store download buttons, and two QR codes labeled 'iOS' and 'Android'. A third screenshot depicts the app's welcome screen for account creation.

3.2 Pair the Smart Hub

1. Plug the Smart Hub into an indoor power source near your WiFi router and the timer's outdoor location.
2. Open the RainPoint Smart+ App and tap "Add device" or the "+" icon to add a new device.
3. Find and select "HWG009WB" or the corresponding icon to add the Smart Hub. Alternatively, press the scan QR code icon (Note: QR codes are excluded) to proceed.
4. Select your 2.4GHz WiFi network and enter the password. Tip: If your router is dual-band, look for a "Common router setting method" to differentiate between 2.4GHz and 5GHz networks.
5. Note: The Smart Hub connection only supports 2.4GHz WiFi.
6. Plug the HWG009WB Smart Hub into an outlet and wait approximately 10 seconds for initialization.
7. Press and hold the hub button for 5 seconds until the blue indicator light flashes rapidly (2 times per second).
8. Select "All steps completed" and tap "Next". The app will then search for and pair your Smart Hub automatically.
9. Click "Save" for final confirmation after the device is successfully added. The Smart Hub's icon will appear on the app's home screen.

Diagram Description: A series of app screenshots illustrate the pairing process: the "My Home" screen, the "Add Device" screen showing various device models, Wi-Fi selection, password entry, a prompt about connecting to a 5G network, the "Smart WiFi Connection" status, and the final "My Home" screen with the connected hub.

3.3 Connect the Bluetooth Hose Timer to Smart Hub

1. Insert 4 new AA alkaline batteries (not included) into the timer's battery compartment and secure it.
2. WARNING: Use only alkaline batteries. Do not mix old and new batteries. Ensure correct polarity. Remove exhausted batteries. Remove batteries for long-term storage.
3. On the "HWG009WB" device page in the app, press the "+" icon to add a device.
4. Find and select "HTV107B" or the corresponding icon to add the Timer. Alternatively, scan the QR code (Note: QR codes are excluded) and enter the next step.
5. Press and hold the timer's button until the LED light flashes red quickly. Simultaneously, select "Next" in the app to start searching for the device automatically.
6. Note: The water timer can be paired with a smart hub or directly via Bluetooth. For hub pairing, ensure your phone's Bluetooth is enabled.
7. If you fail to connect the timer initially, press and hold the timer's button (or refer to "RESET THE DEVICE") to reset and reconnect.
8. After successful connection and plan creation, the next watering plan time will be displayed on the device page. The timer and hub icons will appear on the app's home screen.
9. Note: Pairing the timer with the smart hub enables remote control.

Diagram Description: Illustrations show battery insertion into the timer. App screenshots depict adding a sub-device, selecting the timer model, the "Ready for Pairing" screen, the "Pairing" status with a progress indicator, and the final "My Home" screen showing both the hub and timer connected. Another screenshot shows the timer's device page displaying the next watering plan time.

3.4 Timer Installation

1. Turn off the garden faucet.
2. Wrap Teflon tape around the faucet thread.
3. Screw the timer to the garden faucet, positioning it vertically to prevent rainwater accumulation and leakage into the interior.
4. Wrap Teflon tape around the threads of the timer outlets.
5. Screw the garden hoses to the timer outlets.
6. Turn on the faucet after programming the timer.

Tips: If the connection between the timer and faucet/hose is loose or leaking, use more sealing tape. Ensure the filter is installed correctly and kept clean for better filtering effect. For optimal connection and operation, keep your smartphone near the timer (within 60 meters in open areas). Reduce distance if walls or bushes obstruct the signal.

Diagram Description: An illustration shows the timer being attached to a faucet. Examples of correct and incorrect hose connections are shown with checkmarks (✔️) and crosses (❌). A house icon indicates the optimal range, with text stating "Less than 100 feet (No bushes, walls blocking)". Another diagram shows how to install the filter correctly versus incorrectly.

3.5 Test Before Use

Congratulations on completing the setup! Test the internal valve of your water timer before use.

1. Keep the faucet turned off.
2. Press the left/right zone button on the timer. A "click" sound indicates the valve opens for manual watering. After a few seconds, press the button again; another "click" means the valve closes.
3. Turn the faucet on slightly. Press the left/right zone button to check if water flows or shuts off as expected. If correct, the valves are normal. If not, repeat the steps.

The test is complete and normal. Keep the faucet fully turned on. Note: During testing, keep away from water outlets to avoid splashing.

Diagram Description: An illustration shows the Hose Timer. Text describes the manual testing procedure for the timer's valves.

4. APP Features and Functions

4.1 APP Home Screen

The app's home screen provides access to various functions:

• All Devices: A list of all connected devices. Tap icons to access device operation pages for programming schedules.
• Room Management: For organizing indoor automatic irrigation systems in different rooms.
• Plan: View, customize, and enable/disable watering schedules. The "Rain Delay" function can be activated for 24, 48, or 72 hours.
• Info: Check weather conditions (next 7 days) and the next watering time for connected devices.
• Home Management: Customize home name, add family members, or add other homes for managing irrigation schedules across residences.
• Add Devices: Add multiple RainPoint devices to create a smart home irrigation system.
• Me: Access notifications (online/offline status, irrigation records, alerts), FAQs, user manuals, and report issues via "Help & Feedback". Connect to Google Assistant or Amazon Alexa for voice control. Adjust language and notification settings.

Diagram Description: A screenshot of the "My Home" screen is shown with callouts pointing to "All Devices", "Room Management", "Plan", "Info", "Home Management", "Add Devices", and "Me" sections, explaining their functions.

4.2 Device Home Page

This page displays the status and controls for a specific device.

• Setting: Access device settings and watering customization via the gear icon (⚙️) in the top right corner.
• Left Side Valve: Manage plans or manual watering for Zone 1 (Left).
• Right Side Valve: Manage plans or manual watering for Zone 2 (Right).
• Next Plan Time: Shows the scheduled time for the next watering cycle.
• Irrigation Mode: Manual watering mode. Set watering time (1 min to 12h) and tap "Confirm" to start. Tap "Irrigation" and "Confirm" again to stop.
• Interval Mode: Misting mode. Set watering time (1 min to 12h) and interval (1s to 60mins). Tap "Confirm" to start misting. Tap "Interval" and "Confirm" to stop.
• Plan: Access the plan setup page to create up to 6 watering plans. "Rain Delay" can be set for 24/48/72 hours. Tap the calendar icon (?) to view your plan.

Diagram Description: A screenshot of a device's home page (e.g., HTV210B) is displayed, showing "Zone 1 (L)" and "Zone 2 (R)", "Next Plan Time", and navigation buttons for "Plan", "Irrigation", and "Interval". Callouts label these elements.

4.3 Basic Setting

Access the "Settings" page from the app's home screen (top right corner icon ⚙️) to manage device information (name, interface, description) and advanced settings.

• Interval Irrigation: Configure mist time and interval for manual misting mode.
• Default Duration Time: Set the default watering duration for manual irrigation mode.

Diagram Description: Screenshots show the "Settings" menu with options like "Device Name", "Device Information", "Zone 1 (L)", "Zone 2 (R)", "Interval Irrigation", and "Default Duration Time". Other screenshots detail the configuration screens for "Interval Irrigation" (Run Time, Interval) and "Duration" selection.

4.4 Plan Setting

Create new auto-watering plans by selecting "Plan" and then the "+" icon on the "Irrigation Plan" page.

• Watering Mode: Choose between "Irrigation Mode" (standard start time, duration, frequency) and "Interval Mode" (misting with customizable mist time and interval).
• Start Time: Set the plan's start time.
• Duration: Set the watering duration for the plan.
• Repeat: Set the watering frequency (e.g., Everyday, or specific days).
• Effective Date: Set the start date for the plan.

After setting up a plan, press the checkmark icon (✔️) to save it. The "Plan" page will show an overview, allowing you to turn plans on/off. Up to six plans can be created.

Plan Calendar: Tap the calendar icon (?) on the "Plan" page to view all watering schedules.

Diagram Description: Screenshots show the "Plan Settings" interface for both "Irrigation" and "Interval" modes, allowing users to set Start Time, Duration, and Repeat frequency. Another screenshot shows the selection of days for the "Repeat" setting. A final screenshot displays the "Irrigation Plan" overview with toggle switches for plans and the "Calendar" view showing scheduled dates.

4.5 Manual Watering

Manually control watering directly from the app.

• Manual Irrigation Mode: Tap "Irrigation" on the "Plan" page. Set the watering time (1 min to 12h) and tap "Confirm" to start. Tap "Irrigation" and "Confirm" again to stop.
• Manual Interval Mode: Tap "Interval" on the "Plan" page. Set watering time (1 min to 12h) and interval (1s to 60mins) for misting. Tap "Confirm" to start. Tap "Interval" and "Confirm" to stop.

Note: Manual watering may skip scheduled plans if they overlap.

Diagram Description: Screenshots show the app interface for manual irrigation and interval watering, including setting the duration and run time/interval.

4.6 Weather Conditions & Devices' Next Plan Time

The "Info" screen displays weather forecasts and the next watering time for your devices.

• To view weather, tap "Get Location" and then "Save" to set your location. The screen will show current and 7-day weather details (temperature, humidity, rain, wind).
• Adjust location information via "Me" → "HOME Management" → "My Home" → "Location" → "Get Location" → "Save".
• Weather information helps in adjusting watering schedules. Use the "Info" screen's top right icon to toggle weather display or manage device next plan times.

Diagram Description: Screenshots show the "Info Display" with weather details (e.g., "11 Cloudy 17°C/9°C", humidity, rain, wind direction, wind speed) and a forecast for upcoming days. Another screenshot shows the "Info Display" list of optional devices and their next plan times.

4.7 Plan Overview & Setting

On the "Plan" screen, review and adjust all set watering plans. You can easily enable or disable the "Rain Delay" feature for 24/48/72 hours.

Diagram Description: Screenshots show the "Plan" screen listing multiple watering plans (Plan 1, Plan 2, Plan 3) with their start times, durations, and repeat settings, along with toggle switches to enable/disable them. One screenshot also shows options to "Turn on 'Rain Delay'" or "Turn off 'Rain Delay'".

4.8 Home Management

RainPoint supports adding family members and sharing devices for co-management of the home irrigation system.

1. Tap "Me" on the app's home screen.
2. Select "HOME Management" to set the current home or create a new one.
3. Configure your HOME Name, Room or Zone, Location, Time Zone, Members, Units Format, and Currency.

Diagram Description: Screenshots show the navigation path to "HOME Management" from the "Me" screen, followed by the "HOME Management" screen itself, and then the "Home" settings screen where details like Home Name, Location, and Time Zone can be configured.

4.9 Third-Party Voice Service

Control your WiFi water timer using voice commands with Google Assistant or Amazon Alexa.

To set up:

1. Navigate to "Me" → "Third-party Voice Service".
2. Tap "Google Assistant" or "Amazon Alexa" to access the operation guide for connecting your timer.

Note: Voice commands are limited to simple phrases like "turn on" or "turn off" and must be in English.

Diagram Description: Screenshots show the "Third-party Voice Service" screen with options for "Google Assistant" and "Amazon Alexa".

4.10 Reset The Device

How to reset the timer:

1. Remove all batteries from the timer.
2. Wait 10 seconds, then insert 4 fresh AA alkaline batteries.
3. While inserting batteries, press and hold the timer's button until the LED indicator flashes quickly (2 times per second), indicating it has been restored to pairing mode.

How to reset the smart hub:

1. Remove the smart hub from the outlet.
2. Wait 10 seconds, then plug the smart hub back into the outlet.
3. While plugging in, press and hold the hub's button until the LED indicator flashes quickly (2 times per second), indicating it has been restored to pairing mode.

4.11 The Meaning Of Led Light

LED indicator color of HTV210B Bluetooth Hose Timer:

• Power-on reset: WHITE and RED lights on simultaneously for 1 second.
• Factory reset: RED light on for 2s → RED & BLUE lights on simultaneously for 1s → RED light flashes rapidly for pairing → BLUE light on for 2s (successful pairing).
• Irrigation mode (Normal state): WHITE light flashes once every 4 seconds, staying lit for 0.1 second.
• Irrigation mode (Scheduled but unsynchronized time): RED light flashes once every 4 seconds, staying lit for 0.1 second.
• Interval mode: WHITE light flashes twice every 4 seconds, staying lit for 0.1 second.
• Low battery status: RED light flashes once every 3 seconds, staying lit for 0.1 second.

LED indicator color of HWG009WB Smart Hub:

• Smart pairing status: BLUE LED light flashes fast (2 times per second).
• AP pairing status: BLUE LED light flashes rapidly and then slowly.

5. Troubleshooting

6. Precautions

1. For outdoor use with cold water only. Sheltered placement prolongs life.
2. Tighten connections without tools to avoid damage.
3. Place the filter horizontally in the water inlet to prevent leakage.
4. Replace low batteries promptly to avoid operation interruption. Ensure the battery compartment is dry during replacement.
5. Remove batteries and store the timer indoors when not in use.
6. Do not use the timer outside the temperature range of 38°F (3°C) to 120°F (50°C).
7. Do not subject the product to extreme force or shock.
8. Avoid severe electrical shock; do not spray water into outlets or electrical sources. Never immerse the product in water.
9. Do not mix old and new batteries or different battery types.
10. Install the timer vertically to the ground to prevent valve body damage.
11. Under freezing temperatures, remove timers from the faucet and store indoors to prevent freezing damage.
12. Clean filters regularly and replace if worn to prolong the timer's working life.

7. Warranty Policy

RainPoint offers a 1-year warranty against manufacturing defects in materials and workmanship from the date of purchase. Defective products found under reasonable use and service will be replaced free of charge by RainPoint. To extend and activate your warranty, email support@rainpointonline.com with your order ID; a response will be provided within 24 hours.

Icons: FCC logo, CE logo, Crossed-out wheeled bin symbol (indicating separate collection), Recycling symbol, AA battery icons (labeled "Not included").

French Text: Information regarding collection points for recycling and prioritizing repair or donation.

8. FCC Statement

FCC ID: 2AWDBHTV210B, 2AWDBHWG009WB

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If interference occurs, users are encouraged to try correcting it by:

• Reorienting or relocating the receiving antenna.
• Increasing the separation between the equipment and the receiver.
• Connecting the equipment to an outlet on a different circuit than the receiver.
• Consulting a dealer or experienced radio/TV technician.

Note: The manufacturer is not responsible for radio or TV interference caused by unauthorized modifications.

9. Customer Support

For setup assistance and tutorial videos, subscribe to the RainPoint YouTube channel. You can find the channel by scanning the provided QR code (Note: QR codes are excluded) or searching on YouTube.

If the app and manual do not provide the necessary information, please contact RainPoint support. Provide the LOT NO. (found on the back of the device) if applicable.

For further assistance, scan the QR code (Note: QR codes are excluded) or email support@rainpointonline.com.

External Link: The RainPoint YouTube channel can be accessed via www.youtube.com/@rainpoint.