MelodySusie M Series Jade Plus Electric Nail Drill
Thank you for choosing MelodySusie! Please read this user guide carefully and keep it in an accessible location so you may refer to it later.
IMPORTANT SAFEGUARDS
READ ALL INSTRUCTIONS BEFORE USING.
⚠ To reduce the risk of burns, electrocution, fire or injury to persons. Please be sure to read the safety instruction as follow to avoid potential hazards that could result in personal injuries or damage to the device.
01 Check before Using
- Check the power supply cord before the first time use and during the life of the device. Do not use the device if it has a damaged cord or plug, or if it is not working properly.
- Do not plug the device into a voltage system that is not specified on the device or charger. Use with improper voltage will damage the device and VOID warranty.
- Use the original charger only.
- The handpiece of this nail drill is not compatible with other models of nail drill machine from MelodySusie and other brands. Please don't connect the handpiece with a different nail drill machine.
02 Note for Battery
- The Battery needs to be charged fully before first use to ensure optimal performance.
- Do not overcharge the device or use it when it is charging. Charge the device in well-ventilated condition with 0℃~40℃.
- Do not charge the device close to flammable or explosive materials. When charging the device, please do not cover it with clothes or other things.
- If the device is not used for long periods of time, you should charge and discharge once every three months. In normal conditions, the battery performance will decline over several years.
03 Note for Using
- To prevent electric leakage and shock or fire, do not draw out the connecting wires during use or touch the plug with the wet hand. Turn the power off after use.
- Do not use the crooked or damaged nail drill bit or replace the bit when power is on.
- Do not adjust the speed abruptly, stop use once the unusual movement and noise happens.
- Misuse, dropping or excessive force may cause device damage.
- Minor should not use this device without parental consent and supervision.
04 Maintenance Work
- Do not disassemble the device. Doing so could be dangerous and constitutes voiding warranty conditions.
- Do not keep the device in a metal box, car, or other places at high temperature(more than 50°C). Keep the handpiece dry and away from oil and grease.
- Do not store the device in a hot or humid environment. Store it in a cool and dry place.
- Keep the electrical cord away from heated surfaces.
- Do not dispose of the device in heat or fire.
- Do not clean the device with harmful chemicals or detergents.
05 Note for Injury
- Having manicures done frequently can cause injuries to the nails as well.
- If you need to remove the gel polish of natural nails, try to use the nail polish remover pads to avoid damage to the nail bed with improper operation.
- Do not use the device if you have an open wound on your nail or hand.
- If you have any skin diseases, heat-sensitive, allergic reactions, onychomycosis, or any other disorder, you should consult your doctor and medical professionals before using the device.
The operator shall be responsible for any consequences including product damage or accidents if not strictly complies with the instructions.
If you require any technical support, please contact MelodySusie.
SAVE THE INSTRUCTION MANUAL
06 Six Drill Bits
Needle Head
Polish nail edge
Cone
Under nails, cuticles, and sidewalls
Mandrel+Sanding Bands
Surface work, shortening, and removal
Safety Bit
Cuticle work, polish nail side edge
Large Barrel
Surface work for backfill cutting, shorten, infill cuticle
Small Barrel
Surface work
Device Components:
1. ON/OFF Speed control knob
2. F/R button
3. LCD screen (It will show the RPM and the battery)
4. Handpiece fixture
5. DC socket
6. Handpiece connector
07 How to Use?
- Choose one grinding drill bit, release the handpiece, insert the drill bit at the drill head and lock it in place.
- Rotate the ON/OFF button to turn on the device.
- Rotate the speed control knob to accelerate or decelerate the rotation speed.
- Change the rotation direction of the grinding drill bit on the F/R button if needed.
- After the polishing is finished, please rotate the central barrel and take out the drill bit. The handpiece fixture could be used to place the handpiece when not in use.
08 How to Replace Drill Bit?
Please make sure that the desired bit is suitable for the collet.
Note: Do not move central barrel during operation.
- Turn central barrel clockwise until hearing a “click” sound to release drill bit. Taking out the blank bar. Put the desired bit into the handpiece.
- Turn central barrel counterclockwise until hearing a “click” sound to lock drill bit in place.
- Be sure to confirm the rotation of the bit and collet. Please take care of your fingers not to be hurt by bit edge.
09 Charging
- Take out the adapter and connect it with the DC Socket.
- Connect the power supply with the adapter and insert the main plug into a wall socket.
- The LCD screen will show the battery.
10 Problem and Terms of Settlement
| Malfunction | Reasons | Solutions |
|---|---|---|
| Changing the nail drill bit when the power is on | 1. Motor burns out 2. Bearing damages (Loud Noise) | Turn off the power when changing the nail drill bit. |
| The power is on when not in use | 1. Motor burns out 2. Device lifespan shortens 3. Bearing damages (Loud Noise) 4. Handpiece damages | Turn off the power when not in use. |
| Long time, Large load work | 1. Motor burns out | The continuous working time should not be too long when the working condition is in heavy load. When the device is overheating, it should be stopped immediately to make it return to normal temperature. |
| Insert into a mismatched power supply | 1. Motor burns out | According to the device voltage requirements, insert the matching power supply. |
| Put the power cord at random/Pull the power cord | 1. Device lifespan shortens 2. Power cord brokes 3. Poor connection 4. Easy to cause short circuit | Do not pull the power cord. |
| Replace the original charger randomly | 1. Device damages 2. Easy to cause short circuit | Use the original specification charger. |
| Dust into device | 1. Bearing damages (Loud Noise) 2. Motor gets hot 3. Rotational speed slows down 4. The potentiometer speed regulation fails 5. Handpiece damages | Clean dust, add the dust-proof protection of the dustproof hood. |
| Device drops to the ground or by other impacts | 1. The ON/OFF button doesn't work 2. The potentiometer speed regulation fails 3. F/R button doesn't work 4. Handpiece damages | Avoid device drops or by other impacts (If the handpiece was damaged, it can be purchased separately.) |
| Insert the nail drill bit into the device incorrectly /Rotate the central barrel into the place incorrectly /Take the drill bit out when the central barrel is locked | 1. Drill bit falls out 2. High vibration 3. Drill bit stucks 4. The Handpiece stucks and cannot be turned on 5. Handpiece damages | Insert the nail drill bit into the device correctly/If the drill bit stucks, please release the handpiece and try to take out it hard/Rotate the central barrel correctly. |
| Replace drill bit when handpiece is not completely stopped | 1. The handpiece stucks and cannot be turned on 2. Handpiece damages | Do not replace drill bit when handpiece is not completely stopped. |
| The size of drill bit is not suitable | 1. Cannot insert the drill bit into the device | Use standard drill bit. |
| Water into the device/Operate in wet or moist conditions/Use a wet cloth to clean the device | 1. Motor burns out 2. Device lifespan shortens | Do not operate in wet or moist conditions/Only a dry cloth is allowed for cleaning. |
| Overcharge | 1. Battery lifespan shortens | Not exceed the specified charging time. |
11 Specifications
Input voltage range: 100-240V 50/60Hz
Output voltage: 24V/1A
12 Warranty and Customer Service
MelodySusie offers a 6 months limited warranty on quality related issues. Please apply for your extra 6 months warranty extension and download the instruction manual in other languages by registering on www.melodysusie.com if needed.
Thank you for purchasing from MelodySusie. You are welcome to share your experience after receiving the product. Please contact MelodySusie for any technical support if needed.
Contact Information:
- Website: www.melodysusie.com
- US Service: service@melodysusie.com
- UK Service: service.uk@melodysusie.com
- FR Service: service.fr@melodysusie.com
- DE Service: service.de@melodysusie.com
- Address: Whipple Rd, Union City, CA 94578
EU Representative: AMZLAB GmbH, Laubenhof 23, 45326 Essen, Germany
UK Representative: THEMIS AR support Itd., 85 Great Portland St. London, United Kingdom, W1W 7LT
