MelodySusie Stacie Electric Nail Drill - Instruction Manual
Model: S Series
Introduction
Thank you for choosing MelodySusie! Please read this user guide carefully and keep it in an accessible location for future reference.
Important Safeguards
READ ALL INSTRUCTIONS BEFORE USING.
⚠️ To reduce the risk of burns, electrocution, fire, or injury to persons.
Please read the following safety instructions to avoid potential hazards that could result in personal injuries or damage to the device.
01 Check Before Using
- Check the power supply cord before the first use and during the device's life. Do not use the device if it has a damaged cord or plug, or if it is not working properly.
- Do not plug the device into a voltage system that is not specified on the device or charger. Use with improper voltage will damage the device and void the warranty.
- Use the original charger only.
- The handpiece of this nail drill is not compatible with other models of nail drill machines from MelodySusie and other brands. Do not connect the handpiece with a different nail drill machine.
02 Note for Using
- To prevent electric leakage and shock or fire, do not draw out the connecting wires during use or touch the plug with a wet hand. Turn the power off after use.
- Do not use a crooked or damaged nail drill bit or replace the bit when the power is on.
- Do not adjust the speed abruptly; stop use once unusual movement and noise occurs.
- Misuse, dropping, or excessive force may cause device damage.
- Minors should not use this device without parental consent and supervision.
03 Maintenance Work
- Do not disassemble the device. Doing so could be dangerous and voids warranty conditions.
- Do not keep the device in a metal box, or other places at high temperature (above 50°C). Keep the handpiece dry and away from oil and grease.
- Do not store the device in a hot or humid environment. Store it in a cool and dry place.
- Keep the electrical cord away from heated surfaces.
- Do not dispose of the device in heat or fire.
- Do not clean the device with harmful chemicals or detergents.
04 Note for Injury
- Having manicures done frequently can cause injuries to the nails as well.
- If you need to remove gel polish from natural nails, try to use nail polish remover pads to avoid damage to the nail bed from improper operation.
- Do not use the device if you have an open wound on your nail or hand.
- If you have any skin diseases, heat-sensitive or allergic reactions, onychomycosis, or any other disorder, consult your doctor and medical professionals before using the device.
The operator is responsible for any consequences, including product damage or accidents, if instructions are not strictly complied with. For technical support, please contact MelodySusie.
SAVE THE INSTRUCTION MANUAL
05 Six Drill Bits
Descriptions of the six drill bits:
- Needle Head: Polish nail edge.
- Cone: For use under nails, cuticles, and sidewalls.
- Mandrel + Sanding Bands: For surface work, shortening, and removal.
- Safety Bit: For cuticle work and polishing nail side edges.
- Large Barrel: For surface work, backfill cutting, shortening, and infill cuticle.
- Small Barrel: For surface work.
Device Components:
Diagram showing the nail drill unit and handpiece:
- 1. Handpiece: The part that holds the drill bit.
- 2. Power Indicator: Light indicating the device is on.
- 3. ON/OFF Speed Control Knob: Controls power and rotation speed.
- 4. Handpiece Jack: Port to connect the handpiece.
- 5. F/R Button: Forward/Reverse rotation direction control.
- 6. Drill Bit Hole: Slot to hold the drill bit when not in use.
- 7. DC Socket: Port for the power adapter.
06 How to Use
- Choose the drill bit and insert it firmly into the drill.
- Connect the handpiece to the handpiece jack.
- Connect the power supply to the DC socket.
- Rotate the speed control knob to adjust the rotation speed.
- Change the direction of rotation using the F/R button if needed.
- After polishing, turn off the device and remove the drill bit. The handpiece hole can be used to store the handpiece when not in use.
07 Problems and Solutions
| Malfunction | Reasons | Solutions |
|---|---|---|
| Changing the nail drill bit when the power is on | 1. Motor burns out 2. Bearing damages (Loud Noise) | Turn off the power when changing the nail drill bit. |
| The power is on when not in use | Turn off the power when not in use. | |
| Long time, Large load work | 1. Motor burns out 2. Device lifespan shortens 3. Bearing damages (Loud Noise) 4. Handpiece damages | The continuous working time should not be too long under heavy load. If the device is overheating, stop it immediately to return to normal temperature. |
| Insert into a mismatched power supply | 1. Motor burns out | Use the matching power supply according to the device voltage requirements. |
| Put the power cord at random/Pull the power cord | 1. Device lifespan shortens 2. Power cord breaks 3. Poor connection 4. Easy to cause short circuit | Do not pull the power cord. |
| Replace the original charger randomly | 1. Device damages 2. Easy to cause short circuit | Use the original specification charger. |
| Dust into device | 1. Bearing damages (Loud Noise) 2. Motor gets hot 3. Rotational speed slows down 4. The potentiometer speed regulation fails 5. Handpiece damages | Clean dust, add dust-proof protection. |
| Device drops to the ground or by other impacts | 1. The ON/OFF button doesn't work 2. The potentiometer speed regulation fails 3. F/R button doesn't work 4. Handpiece damages | Avoid device drops or other impacts. (If the handpiece is damaged, it can be purchased separately.) |
| Insert the nail drill bit into the device incorrectly | 1. Drill bit falls out 2. High vibration 3. Drill bit stucks | Insert the nail drill bit correctly. If the drill bit is stuck, release the handpiece and try to remove it. |
| Replace drill bit when handpiece is not completely stopped | 1. The handpiece stucks and cannot be turned on 2. Handpiece damages | Do not replace drill bit when handpiece is not completely stopped. |
| The size of drill bit is not suitable | 1. Can not insert the drill bit into the device | Use standard drill bit. |
| Water into the device/Operate in wet or moist conditions/Use a wet cloth to clean the device | 1. Motor burns out 2. Device lifespan shortens | Do not operate in wet or moist conditions. Only a dry cloth is allowed for cleaning. |
08 Specifications
- Input voltage range: 100-240V 50/60Hz
- Output voltage: DC 0-12V 1A
Contact Information:
- Email: service@melodysusie.com
- Email: service.uk@melodysusie.com
- Email: service.fr@melodysusie.com
- Email: service.de@melodysusie.com
- Website: www.melodysusie.com
Company Representatives:
- US: Whipple Rd, Union City, CA 94578
- EU REP: AMZLAB GmbH, Laubenhof 23, 45326 Essen, Germany
- UK REP: THEMIS AR support Itd., 85 Great Portland St. London, United Kingdom, W1W 7LT
09 Warranty and Customer Service
MelodySusie offers a 6-month limited warranty on quality-related issues. Please register on the MelodySusie website to extend your warranty by an additional 6 months and download the instruction manual in other languages if needed.
Thank you for purchasing from MelodySusie. You are welcome to share your experience after receiving the product. Please contact MelodySusie for any technical support.
