MelodySusie SM200F Nail Drill

01 Safety Instructions

Check Before Using

1. Check the power cord before using the device for the first time, and periodically throughout its life. Do not use the device if the cord or plug is damaged, or if the device is not functioning correctly.
2. Only plug this device into a voltage system that matches the voltage system specified on the device or charger. The use of improper voltage can cause damage to the device and will VOID the warranty.
3. Use the original charger only.
4. The handpiece of the device is not compatible with other models of nail drill machines from MelodySusie or other brands. Please do not connect the handpiece with other nail drill machines.

Note for Battery

1. Fully charge the battery before the first use to ensure optimal performance.
2. Do not overcharge the device or use it when it is charging.
3. Charge the device in a well-ventilated area within the temperature range of 0°C to 40°C.
4. Do not charge the device near any flammable or explosive materials.
5. Do not cover the device with clothes or other materials while it's charging.
6. Charge and discharge the device once every three months if the device is not used for long periods. Please note that the battery performance may decline over several years under normal conditions.

Note for Using

1. Do not draw out the connecting wires during use or touch the plug with wet hands to prevent electrical leakage, shock, or fire hazards. Please turn the power off after use.
2. Do not use crooked or damaged nail drill bits, and only replace the bit when the power is off.
3. Adjust the speed gradually, avoiding sudden changes. Immediately stop using the device if there are any unusual movements or noises.
4. Misuse, dropping or excessive force may cause device damage.
5. Individuals under the age of 18 require parental consent and supervision to use this device.
6. Do not operate in wet or moist conditions.
7. Do not cover the ventilation of the handpiece or touch any rotating part while the device is working.

Maintenance Work

1. Do not disassemble the device. It is dangerous and will VOID the warranty.
2. Do not place the device at approximately or more than 50°C (in a metal box, car, or other hot places). Keep the handpiece dry and keep it away from oil and grease.
3. Store the device in a cool and dry place. Do not store it in a hot or humid environment.
4. Store the power cord properly and keep it away from heated surfaces.
5. Do not dispose of the device in heat or fire.
6. Do not clean the device with harmful chemicals or detergents. Only a dry cloth is allowed for cleaning.

Note for Injury

1. Frequent manicures can also cause damage to your nails.
2. If you need to remove the gel polish from natural nails, try to use nail polish remover pads to avoid damage to the nail bed with the improper operation.
3. Do not use the device if you have open wound on your nails or hands.
4. If you have skin diseases, heat sensitivity, allergic reactions, onychomycosis, or any other condition, consult your doctor and medical professional before using the device.

02 Safety Warnings & Disclaimers

General Safety Precautions

1. This device is for professional use only. Untrained individuals should not operate it.
2. Always wear appropriate safety gear, including gloves, a dust mask, and protective eyewear.
3. Keep children and pets away from the work area at all times, even when the device is not in use. Store the device in a secure, dry location out of reach of children when not in operation.
4. Do not use in wet, humid, or flammable environments.
5. Only use the manufacturer-approved power adapter to charge the device. Do not operate the unit while charging.
6. If the device exhibits overheating, unusual noises, or electrical issues, stop use immediately and disconnect the power.

Usage Restrictions

1. This device is only for nail care purposes. Do not use it for any unintended applications.
2. Avoid applying excessive pressure while using the drill or excessive prolonged use to prevent overheating and nail damage.
3. Do not operate if you are tired, under the influence of alcohol, or taking medication that impairs judgment.
4. Avoid prolonged continuous use to prevent device overheating. A recommended usage time limit is 30-40 minutes per session, allowing the device to cool down between uses.

High-Risk Activities to Avoid

1. Unauthorized Disassembly or Repairs: Disassembling or attempting to repair this device without professional training may result in malfunction or injury. Only qualified professionals should handle repairs.
2. Damaged Accessories: Do not use worn-out or cracked drill bits.
3. Avoid Entanglement: Keep hair, clothing, or brush bristles away from the nail drill to prevent them from getting caught in the machine.
4. Excessive Pressure: Applying too much force can cause nail injuries or motor failure.

Strictly follow the safety instructions above to ensure the safe and proper use of the nail drill.

03 Prohibited Actions & Potential Risks

Disclaimers & Liability Limitation

1. This device is manufactured to meet high safety and performance standards. However, improper usage, inadequate maintenance, or failure to follow instructions may lead to damage or personal injury, for which the manufacturer is not responsible.
2. The manufacturer is not liable for injuries, damage, or losses resulting from unauthorized modifications, improper use, or failure to comply with the user manual.
3. By using this device, the user acknowledges and accepts full responsibility for its proper and safe operation and agrees not to hold MelodySusie responsible for any harm, injury, or damage resulting from improper use.
4. If you experience adverse reactions while using this product, such as skin irritation, burning sensations, or allergic reactions, discontinue use immediately and consult a medical professional. It is recommended to perform a patch test before first use to check for any sensitivity.

For Professional Use Only

This electric nail drill is intended for use by trained professionals in the beauty and nail industry. Do not attempt to use it without proper training. If in doubt, consult a qualified technician before operation.

By using this product, you agree to adhere to all instructions and acknowledge the potential risks associated with improper use.

If you need further assistance, please contact support@melodysusie.com or visit our website at https://www.melodysusie.com for troubleshooting and additional guidance.

04 Contents

• Rechargeable Nail Drill * 1
• Power Supply * 1
• Handpiece Holder * 1
• Carbide Drill Bit * 1
• Ceramics Drill Bit * 1
• Drill Bits* 6
• Sanding Bands * 50
• User Manual * 1

05 Using the Nail Drill

Drill Bit Types

• Small Barrel: Surface work
• Cone: Cuticle work, polish sidewalls and under nails
• Needle Head: Polish nail edge
• Safety Bit: Cuticle work, polish nail side edge
• Large Barrel: Surface work for backfill cutting, shorten, infill cuticle
• Mandrel + Sanding Bands: Surface work, shortening, and removal

Operating Instructions

1. Replace the desired drill bit. Please read and follow the steps for Replacing the Drill Bit.
2. The handpiece connector connects the portable control box and nail drill.
3. Rotate the ON/OFF button to turn on the device.
4. Rotate the speed control knob to accelerate or decelerate the rotation speed of the drill bit.
5. Press the F/R button to change the rotation direction of the drill bit if needed.
6. Press the Pause/On button to pause the device when needed, then press to run it again.
7. Rotate the ON/OFF button to off after polishing. Then rotate the central barrel and take out the drill bit. Place the handpiece in the handpiece fixture when not in use.

Device Components

• 1. ON/OFF Speed Control Knob
• 2. Pause/ON Button
• 3. F/R Button
• 4. LED Screen (It will show the RPM/Battery /Rotation Direction)
• 5. Portable Hook
• 6. Handpiece Connector
• 7. Portable Hook
• 8. DC Socket

Replacing the Drill Bit

Originally a blank bar is attached, and you can replace it as you like. Please make sure that the desired bit is suitable for the collet.

? Only change the drill bit when the power is off and the handpiece completely stops.

? Do not move central barrel during operation.

? Insert the drill bit into the device correctly and rotate the central barrel to the correct position, otherwise high vibration, drill bit stuck, etc. may happen.

1. Turn the central barrel clockwise until hearing a 'click' sound, then release and remove the original bit and place the desired bit into the handpiece.
2. Turn the central barrel counterclockwise until hearing a "click" sound to lock the drill bit in place.
3. Please distinguish the rotation direction of the bit and collet. Take care of your fingers not to be hurt by the edge of bits.

Charging

1. Take out the adapter and connect it to the DC socket of the nail drill.
2. Connect the power supply with the adapter and insert the main plug into a wall socket.
3. The LED screen will show the battery charge status. Charge the device when the symbol flashes.

06 Specifications

Input Voltage: DC 5.0V/2.0A

07 Warranty and Customer Service

? 6-month limited warranty

(Apply for an extra 6-month warranty extension by registering on https://www.melodysusie.com/pages/extend-warranty if needed).

Note: You can purchase the handpiece separately if needed.

? If you require any technical support, please contact us.

• Website: www.melodysusie.com
• Email: service@melodysusie.com
• Email: service.uk@melodysusie.com
• Email: service.fr@melodysusie.com
• Email: service.de@melodysusie.com