VIHALS Extendable Table

Assembly Instructions

Product Overview

This document provides assembly instructions for the IKEA VIHALS extendable table. It includes a list of all necessary parts and step-by-step guidance for assembly.

Parts List

Bolt (Quantity: 9) - Part Number: 155677
Hex Bolt (Quantity: 4) - Part Number: 10040001
Washer (Quantity: 4) - Part Number: 115461
Screw (Quantity: 8) - Part Number: 109180
Washer (Quantity: 4) - Part Number: 117217
Washer (Quantity: 4) - Part Number: 130912
Allen Key (Quantity: 1) - Part Number: 101001
Bracket (Quantity: 4) - Part Number: 158208
Connector Plate (Quantity: 2) - Part Number: 155866 (10123038)
Connector Plate (Quantity: 2) - Part Number: 155868 (10122991)
Bracket/Clip (Quantity: 4) - Part Number: 155869 (10123039)

Assembly Steps

Step 1

Attach four Bracket/Clips (155869, 10123039) to the underside of the tabletop frame. Ensure they are oriented correctly, indicated by a rotational arrow [➡️].

Step 2

Place the tabletop upside down on a soft surface. Attach the side frame pieces to the tabletop using four screws (155869, 10123039) per side.

Step 3

Secure the side frame pieces to the tabletop using eight bolts (155677) and the Allen key (100001). [✔️]

Step 4

Attach two Brackets (158208) to each side frame piece. Insert the bracket and rotate it to lock into place, indicated by an arrow [➡️].

Step 5

Attach two Brackets (158208) to the other side frame pieces, following the same procedure as Step 4.

Step 6

Secure the frame assembly with one bolt (155677) and the Allen key (100001) for each of the previously attached brackets.

Step 7

Attach the legs to the frame. Insert bolts (10040001) through washers (117217, 130912) and into the leg and frame. Use the provided tool (100001) to tighten [?].

Step 8

Secure the legs using two bolts (157680) and the provided tool. Ensure the bolts are tightened correctly [✔️], not over-tightened [❌].

Step 9

Slide a support beam into the designated slots on the frame [➡️].

Step 10

Slide the side support beams into their respective slots on the frame [➡️].

Step 11

Attach the support beams using screws (100001) and washers (115461).

Step 12

Attach the remaining support beams.

Step 13

Secure the support beams using screws (100001) and washers (115461).

Step 14

Attach Brackets (158208) to the frame.

Step 15

Attach the remaining Brackets.

Step 16

Attach the legs to the frame using bolts (10040001), washers (130912, 117217), and the tool (100001) [?].

Step 17

Secure the legs using two bolts (157680) and the provided tool.

Step 18

Attach Connector Plates (155866, 10123038) to the tabletop frame using screws (100001, 109180).

Step 19

Attach Connector Plates (155868, 10122991) to the tabletop frame using screws (109180).

Extending and Retracting the Table

Extending the Table

Step 1: Gently pull one end of the tabletop to extend it, revealing the extension leaf mechanism [➡️].

Step 2: Lift and slide the extension leaf into place, aligning it with the extended tabletop. Use the connector plates to secure it.

Step 3: Ensure the extension leaf is fully seated and secured by the locking mechanisms.

Retracting the Table

Step 1: Release the locking mechanisms on the extension leaf.

Step 2: Carefully lift and slide the extension leaf back into its storage position [⬅️].

Step 3: Gently push the tabletop ends together to fully retract the table [⬅️].

	VIHALS Table Assembly and Extension Guide - IKEA Comprehensive instructions for assembling the IKEA VIHALS table, including a detailed parts list, step-by-step assembly guidance, and information on using the table's extension mechanism.
	IKEA VIHALS Extendable Table Assembly Instructions Comprehensive guide for assembling the IKEA VIHALS extendable table, featuring a detailed parts list and step-by-step instructions with visual descriptions.
	EKEDALEN Extendable Table Assembly Instructions - IKEA Comprehensive guide for assembling the IKEA EKEDALEN Extendable Table, featuring detailed steps, parts list, and extension mechanism instructions.
	VIHALS Gateleg Table Assembly Instructions Step-by-step assembly guide for the IKEA VIHALS gateleg table, detailing parts, tools, and assembly procedures for a functional and durable furniture piece.
	VIHALS Drop-Leaf Table Assembly Instructions \| IKEA Detailed, step-by-step assembly guide for the IKEA VIHALS drop-leaf table. Includes a complete parts list and clear instructions for furniture assembly.
	SKANSNÄS Extendable Table Assembly Instructions Step-by-step assembly guide for the IKEA SKANSNÄS extendable table, including parts list and assembly diagrams.
	SKANSNÄS Extendable Table Assembly Instructions \| IKEA Comprehensive assembly instructions for the IKEA SKANSNÄS extendable dining table. This guide provides a detailed overview of all parts, tools required, and step-by-step instructions for building your SKANSNÄS table.
	MELLANSEL Extendable Table Assembly Instructions \| IKEA Step-by-step guide for assembling and extending the IKEA MELLANSEL extendable table. Learn how to insert and secure extension leaves for versatile dining.