Headrush Portable Bluetooth Speaker

1. Summary

The Headrush Portable Bluetooth Speaker is compliant with Bluetooth V3.0 specifications and can be easily connected wirelessly to any Bluetooth-enabled device. It features a built-in microphone for hands-free calling. For detailed instructions, please refer to this user guide.

2. Speaker Overview

The speaker has the following components:

• 1) MFB (Multi-Function Button) / Indicator
• 2) Microphone
• 3) Charging/Line-in Connector
• 4) Power Switch

3. Package Contents

The package includes:

• 1) Headrush Portable Speaker
• 2) User Manual
• 3) Charging Cable

4. Pairing

To connect your speaker to a Bluetooth-enabled device for the first time, follow these steps:

1. Slide the power switch to ON. Place the speaker close to your Bluetooth-enabled mobile phone (within 1 meter).
2. Ensure the speaker is turned off before starting the pairing process.
3. Press and hold the MFB for 3 seconds. You will hear a beep, and the LED indicator will flash red and blue, indicating the speaker is ready for pairing.
4. Activate your mobile phone's Bluetooth function. Refer to your mobile phone's instruction guide for details on searching for Bluetooth devices.
5. Select "Headrush 8004081 or 8004082" from the list of available devices.
6. If your device requires a PIN code, enter "0000" to complete the pairing. Most devices do not require a PIN.

Once pairing is complete, the speaker will connect to your phone automatically. If pairing is not completed within 2 minutes, the speaker will turn off. Repeat the pairing process if necessary.

5. Charging the Battery

The Headrush Portable Bluetooth Speaker has an internal, non-removable, rechargeable battery. Do not attempt to remove the battery.

1. For first-time use, fully charge the speaker.
2. Plug the charger into an electrical outlet and connect the micro USB plug to the speaker's charging socket.
3. The indicator light will be solid red while charging. A full charge may take up to 2 hours.
4. When the battery is fully charged, the red indicator light turns off, and the blue indicator turns on. Disconnect the charger once the blue indicator is on.
5. When the speaker is powered on and the battery is low, it will beep every 20 seconds, and the indicator light will turn red.

Important: When the charger is connected, it can function as an AC power supply for the speaker.

6. Battery Information

The device is equipped with an integrated lithium-polymer battery that cannot be replaced. The battery's full performance is achieved after two or three complete charging-discharging cycles. The battery can be charged and discharged several hundred times but will lose capacity over time.

Important: To prolong battery life, disconnect the speaker from the power supply as soon as the battery is fully charged. To avoid complete battery discharge, charge the speaker at least every 3 months.

7. Turning Speaker On/Off

Turning On the Speaker

Slide the power switch to ON. Press and hold the MFB for 3 seconds until you hear a tone from low to high. The blue indicator will flash twice, and the speaker will turn on.

Connecting to a Bluetooth-Enabled Mobile Phone

If pairing was successful, the speaker will automatically connect to the last connected phone when turned on. Ensure your phone's Bluetooth function is activated.

Turning Off the Speaker

With the speaker powered on, press and hold the MFB for 5 seconds. You will hear a tone, and the red indicator will flash, indicating the speaker is powered off.

Important: Turn the power off when the speaker is not in use. To conserve power, the speaker will automatically turn off if it is not connected to a device for 20 minutes.

8. Using the Bluetooth Speaker

Streaming Music

The Headrush Portable Bluetooth Speaker supports the A2DP profile, allowing wireless music streaming from a phone or other Bluetooth-enabled device. Music playback will pause automatically for incoming/outgoing calls and resume after the conversation ends.

Answering a Call

When you receive an incoming call, press the MFB to answer, or answer directly from your phone.

Rejecting an Incoming Call

When you receive an incoming call, press and hold the MFB for 2 seconds to reject the call.

Ending a Call

While on a call, press the MFB to end the call, or end the call directly from your phone.

9. Troubleshooting

If you cannot connect the speaker to your mobile phone or other Bluetooth device, try the following:

• Ensure the speaker is fully charged and paired with your mobile phone.
• Ensure the speaker is not connected to any other Bluetooth device.
• Verify that your mobile phone's Bluetooth feature is activated.
• Ensure the speaker is within 10 meters of your mobile device and that there are no obstructions (e.g., walls, other electronic devices) between them.

10. Safety and General Information

• Read this manual carefully and follow all instructions.
• Do not drop the unit from high places to avoid damage or malfunction.
• Keep the unit away from humidity, water, and other liquids. Do not operate the speaker if it has been exposed to liquids to prevent electrical shock, explosion, or damage.
• Do not place the unit near heat sources like direct sunlight, radiators, or stoves, as this may cause explosion, degrade performance, or reduce battery life.
• Do not modify, repair, or disassemble the unit, as the battery may explode.
• Do not place heavy objects on the unit.
• Use only the supplied and approved charger.
• Replacement or service must be performed by a qualified service center or the manufacturer.

CAUTION: ELECTRIC SHOCK HAZARD The battery pack may present a risk of fire or chemical burn if mistreated. Do not incinerate or disassemble; the battery pack may explode and release toxic materials.

11. FCC & IC Statement

This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation.

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of Industry Canada. This Class B digital apparatus complies with Canadian ICES-003.

CAUTION: To comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules, this device must only be installed on computer equipment certified to comply with the Class B limits.

12. Specifications

Limited Warranty

The Source Warranty

The Source warrants this product to be free from defects in materials and workmanship for one (1) year from the date of purchase. During this period, bring the product and proof of purchase to any The Source store or dealer for repair without charge for parts and labor. The Source reserves the right to charge for transportation. This warranty excludes products subjected to misuse or accidental damage.

This warranty is applicable only to products purchased through The Source company-owned stores and dealers, and presented for repair in a country where The Source offers the product for sale. This warranty does not affect any statutory rights you may have, which may vary by jurisdiction.

Imported by: The Source, Barrie, Ontario, Canada, L4M 4W5. Manufactured in China.

For product support, visit www.thesource.ca.

Please Recycle.

© 2012 The Source. All Rights Reserved.