IKEA ELVARLI Drawer Assembly Instructions

Step 1: Prepare the Frame

Identify the main vertical support poles. Ensure they are stable and correctly oriented. The diagram shows two vertical poles being prepared for the system.

Parts needed: Vertical poles, base plates, and connecting screws.

Action: Attach the base plates to the bottom of the vertical poles using the provided screws (4x). Ensure a secure fit.

Diagram Description: Shows two vertical poles with base plates being attached using screws. A close-up shows the screw insertion and tightening process.

Step 2: Install Shelves/Drawer Units

Action: Insert the shelf or drawer unit supports into the vertical poles at the desired height. The diagram shows a unit being slid into place.

Diagram Description: Illustrates the process of sliding a shelf or drawer unit onto the vertical poles. Arrows indicate the direction of insertion.

Step 3: Secure the Unit

Action: Secure the installed unit to the vertical poles using the provided locking mechanisms and screws.

Parts needed: Locking cams, cam screws, and standard screws.

Diagram Description: Close-up views show how to insert cam screws and then use cam locks to secure the unit to the poles. Arrows indicate the rotation of the cam lock to tighten.

Step 4: Attach Drawer Slides

Action: Attach the drawer slides to the sides of the drawer unit. Ensure they are level and correctly positioned.

Parts needed: Drawer slides (2x per drawer), screws.

Diagram Description: Shows drawer slides being attached to the sides of a drawer box using screws. Arrows indicate the correct placement and orientation.

Step 5: Assemble the Drawer Box

Action: Assemble the drawer box components. This typically involves connecting the sides, back, and base.

Parts needed: Drawer sides, back, base, and connecting hardware (screws, dowels, cam locks).

Diagram Description: Illustrates the assembly of the drawer box, showing how the different panels connect. Close-ups detail the use of screws and cam locks.

Step 6: Install Drawer Front

Action: Attach the drawer front to the assembled drawer box. Ensure it is aligned correctly.

Parts needed: Drawer front, screws.

Diagram Description: Shows the drawer front being attached to the drawer box with screws. Alignment guides are indicated.

Step 7: Insert Drawer

Action: Carefully slide the assembled drawer into the installed drawer slides on the frame.

Diagram Description: Depicts the drawer being inserted into the frame, with arrows showing the smooth sliding motion.

Step 8: Final Adjustments

Action: Make any necessary adjustments to ensure the drawer opens and closes smoothly. Some drawer slides have adjustment screws.

Diagram Description: A close-up shows a hand adjusting a screw on the drawer slide mechanism.

Step 9: Add Additional Units (if applicable)

Action: Repeat the process for any additional shelves or drawer units you wish to install in the ELVARLI system.

Diagram Description: Shows the completed system with multiple drawer units installed.

Step 10: Final Check

Action: Ensure all screws are tightened and all units are securely in place. Check the stability of the entire system.

Diagram Description: A final overview of the assembled ELVARLI system.