ELVARLI Storage System Assembly Instructions
Safety Warnings
⚠️ WARNING Children have died from furniture tipover. To reduce the risk of furniture tipover:
- ✅ ALWAYS install anti-tip device provided.
- ❌ NEVER put a TV on this product.
- ❌ NEVER allow children to stand, climb, or hang on any drawers, doors, or shelves.
- ❌ NEVER open more than one drawer at a time.
- Place heaviest items in the lowest drawers.
Read and follow each step of the instructions carefully.
Parts List
| Part Number | Description | Quantity |
|---|---|---|
| - | Vertical Posts | 2x |
| 118331 / 101372 | Shelves / Structural Elements | 4x |
| 119030 | Screws / Fasteners | 4x |
| 110519 / 139251 | Shelves / Top/Bottom Panels | 4x |
| 100349 | Screws / Fasteners | 4x |
| 121902 | Drawer Runners | 4x |
| 101345 | Drawer Runners / Components | 4x |
| 144574 | Drawer Sides | 4x |
| 144575 | Drawer Sides | 4x |
| 101513 | Drawer Bottoms / Screws | 4x |
| 147905 | Drawer Backs | 4x |
| 147906 | Drawer Fronts | 4x |
| 146693 | Back Panels / Dividers | 2x |
| 146677 | Back Panels / Dividers | 2x |
| 117784 | Shelf Supports | 2x |
| 100092 | Shelf Supports | 2x |
| 110670 | Screws / Fasteners | 4x |
| 195225 | Screws / Fasteners | 4x |
| 147170 | Screws / Fasteners | 4x |
| 146970 | Screws / Fasteners | 4x |
| 110519 | Screws / Fasteners | 4x |
| 139251 | Screws / Fasteners | 4x |
Assembly Steps
Step 1
Attach two shelves (e.g., Part 118331 or 101372) to two vertical posts using dowels (Part 101372 or 118331) and screws (Part 119030). The diagram shows shelves being connected between the two upright posts.
Step 2
Attach two additional shelves (e.g., Part 118331 or 101372) to the vertical posts using dowels (Part 101372 or 118331) and screws (Part 119030). The diagram shows more shelves being added to the structure.
Step 3
Attach drawer runners (Part 121902) to the inside surfaces of the vertical posts using screws (Part 119030). The diagram indicates specific mounting points on the posts.
Step 4
Assemble drawer boxes. Connect drawer sides (Parts 144574, 144575) to the drawer bottom (Part 101513) using screws (Part 119030). The diagram shows the basic frame of a drawer being constructed.
Step 5
Attach drawer fronts (Part 147906) to the assembled drawer boxes using screws (Part 100349). The diagram shows the front panel being secured to the drawer frame.
Step 6
Insert the assembled drawers into the unit by aligning them with the previously attached drawer runners. The diagram shows drawers sliding into place.
Step 7
Attach back panels or dividers (Parts 146693, 146677) to the rear of the unit using screws (Part 101513). The diagram shows these panels being fitted into the back of the structure.
Step 8
Attach more drawer runners (Part 121902) to the vertical posts using screws (Part 119030). The diagram shows additional runners being installed for more drawers.
Step 9
Assemble more drawer boxes. Connect drawer sides (Parts 144574, 144575) to the drawer bottom (Part 101513) using screws (Part 119030). The diagram illustrates building additional drawer frames.
Step 10
Attach drawer fronts (Part 147906) to the new drawer boxes using screws (Part 100349). The diagram shows fronts being attached to the second set of drawers.
Step 11
Insert the second set of assembled drawers into the unit by aligning them with the runners. The diagram shows these drawers being placed.
Step 12
Attach more drawer runners (Part 121902) to the vertical posts using screws (Part 119030). The diagram shows further runner installation.
Step 13
Assemble more drawer boxes. Connect drawer sides (Parts 144574, 144575) to the drawer bottom (Part 101513) using screws (Part 119030). The diagram shows building a third set of drawer frames.
Step 14
Attach drawer fronts (Part 147906) to the new drawer boxes using screws (Part 100349). The diagram shows fronts being attached to the third set of drawers.
Step 15
Insert the third set of assembled drawers into the unit by aligning them with the runners. The diagram shows these drawers being placed.
Step 16
Attach final shelves or top/bottom panels (Parts 110519, 139251) using screws (Parts 147170, 146970, 110670, 195225). The diagram shows these panels being secured to the main structure.
Step 17
Attach back panels or dividers (Parts 146693, 146677) to the rear of the unit using screws (Part 101513). The diagram shows these panels being fitted.
Step 18
Attach additional shelves (Parts 110519, 139251) using screws (Parts 147170, 146970, 110670, 195225). The diagram shows more shelves being added.
Step 19
Attach drawer fronts (Part 147906) to the drawer boxes using screws (Part 100349). The diagram shows fronts being attached to drawers.
Step 20
Insert the assembled drawers into the unit by aligning them with the runners. The diagram shows drawers being placed.
Step 21
Attach final components, possibly feet or additional runners/supports (Part 101345), using screws. The diagram shows these final elements being secured.
Step 22
Attach further final components, possibly feet or additional runners/supports (Part 101345), using screws. The diagram shows these final elements being secured.
Step 23
Perform a final check of all connections and ensure the unit is stable. The diagram shows the unit nearing completion.
Step 24
The ELVARLI storage system is now fully assembled. The diagram shows the completed unit.
