Maytag® Top Load Washer Dimension Guide
Product Models
This guide provides dimension information for the following Maytag Top Load Washer models:
- MVW4505MW
- MVW5035MW
- MVW5430MW
- 7MMVW5035MW
- 7MMVW5435MW
Electrical Requirements
| Model | Capacity (US/CAN) |
|---|---|
| MVW4505MW | 4.5 cu ft DOE (US), 5.2 cu ft IEC (CAN) |
| MVW5035MW | 4.5 cu ft DOE (US), 5.2 cu ft IEC (CAN) |
| MVW5430MW | 4.8 cu ft DOE (US), 5.5 cu ft IEC (CAN) |
| 7MMVW5035MW | 4.5 cu ft DOE (US), 5.2 cu ft IEC (CAN) |
| 7MMVW5435MW | 4.7 cu ft DOE (US), 5.4 cu ft IEC (CAN) |
Minimum Circuit Amperage Rating: 15 A
Operating Voltage: 120 V AC only
Operating Frequency: 60 Hz
Product Dimensions
The following tables provide detailed product dimensions in both inches and millimeters for the specified models.
Overall Dimensions
| Dimension | in (minimum) | mm (minimum) | in (maximum) | mm (maximum) |
|---|---|---|---|---|
| A: Height (with feet) | 43 1/4 | 1100 | 44 1/4 | 1122 |
| B: Width | 27 3/4 | 683 | - | - |
| C: Top of Lid Height (with feet) | 38 | 966 | 39 | 988 |
| D: Depth | 27 | 692 | - | - |
Dimensions with Lid Open
| Dimension | in (minimum) | mm (minimum) | in (maximum) | mm (maximum) |
|---|---|---|---|---|
| E: Height with Lid Open | 55 3/4 | 1415 | 56 3/8 | 1432 |
| F: Height of Lid | 18 7/8 | 449 | - | - |
| G: Width of Lid | 23 1/4 | 593 | - | - |
| H: Water Inlet Valves Height | 37 7/8 | 962 | 39 1/2 | 1003 |
| I: Water Inlet Valves from Side | 4 1/2 | 116 | - | - |
| J: Power Cord from Side | 2 1/2 | 63 | - | - |
| K: Power Cord Height | 37 3/8 | 950 | 37 1/2 | 953 |
| Power Cord Length | 62 | 1530 | - | - |
| L: Drain Hose Outlet Height | 7 1/4 | 170 | 7 3/4 | 197 |
| M: Drain Hose Outlet from Side | 4 5/16 | 107 | - | - |
| Drain Hose Length | 41 | 1040 | - | - |
| Diameter of Drain Hose | 1 | 25 | - | - |
Installation Spacing Recommendations
Diagram showing recommended spacing for recessed area or closet installation.
Key Spacing Requirements:
- Maximum height for unit in recessed area: 14" (356 mm)
- Clearance from front of unit: 5" (126 mm)
- Side clearances: 3" (76 mm)
- Ventilation openings in closet door: 48 in² (310 cm²) at top, 24 in² (155 cm²) at bottom.
- Clearance from walls, doors, and floor moldings: 1" (25 mm) on all sides to reduce noise transfer.
Note: Washer tested with 0" (0 mm) side clearance. Additional space may be beneficial for installation and servicing.
