GLOBO Ceiling Fan with Light

Product Information

• Model Numbers: 03613, 03614
• Dimensions: Fan diameter approximately 125mm (D125mm) and 135mm (D135mm)
• Manufacturer: GLOBO Handels GmbH, Gewerbestrasse 3, A-9184 Sankt Peter
• Website: www.globo-lighting.com
• Certifications: CE

Safety and Installation Guidelines

• Clearance: Minimum horizontal clearance from walls: X > 0.6 meters. Minimum vertical clearance from ceiling: Y > 2.3 meters.
• Power Source: Requires 1.5V batteries (x3 for remote, x2 for device - specific device battery requirement not fully clear from diagrams).

Installation Instructions

The following steps outline the general installation process based on the provided diagrams. Ensure all electrical work is performed by a qualified electrician.

1. Mounting Bracket: Secure the main mounting bracket (component [1]) to the ceiling structure using appropriate fasteners (component [11]).
2. Wiring Connections: Connect the main power supply wires to the fan's internal wiring system. This typically involves connecting live, neutral, and earth wires using provided connectors (component [12]). The diagrams show ON/OFF switch indicators.
3. Fan Motor Housing: Attach the fan motor housing (component [2]) to the securely mounted ceiling bracket.
4. Fan Blades: Attach the fan blades (component [3], quantity x3) to the motor housing.
5. Light Fixture: Install the light fixture assembly (component [4]) and connect its wiring to the fan's electrical system.
6. Canopy/Cover: Fit the canopy or cover plate (component [13]) to conceal the mounting hardware and wiring.

Note: Components are referenced by numbers shown in the diagrams. Specific wiring configurations may vary.

Operation

Remote Control Functions

• Power: Use the ON and OFF buttons to control the fan and light.
• Stop: The STOP button is available for immediate cessation of operation.
• Color Temperature: Adjust the light's color temperature using the K+ and K- buttons. Options include 3000K (warm white) and 6000K (cool white).
• Brightness: Control the light brightness with the +100%+ button to increase intensity and the -10%- button to decrease intensity.