GLOBO 0309 Ceiling Fan

Step 1: Prepare Mounting Bracket

Attach the mounting bracket assembly (A) to the ceiling electrical box. Ensure it is securely fastened. The diagram shows the bracket being mounted, with arrows indicating insertion and securing points.

Diagram shows bracket (A) being mounted, with screws and washers.

Parts Used: A, F (implied screws/washers)

Tools: Screwdriver

Step 2: Mount Bracket to Ceiling

Secure the mounting bracket assembly (A) to the ceiling electrical box using screws (H x2). Ensure it is firmly attached.

Diagram shows bracket (A) being secured to the ceiling with screws (H).

Parts Used: A, H

Tools: Screwdriver

Step 3: Electrical Wiring

Connect the fan's wires to the house wiring. Follow standard wiring practices: Live (L), Neutral (N), and Ground (⏚). Ensure power is OFF. Voltage: 220-240V ~.

Diagram shows electrical connections within a junction box, with labels L, N, ⏚. A screwdriver is used to secure wires.

⚡ Ensure power is disconnected before wiring.

Step 4: Attach Motor Housing to Ceiling Mount

Connect the motor housing (B) to the ceiling mount. The diagram shows the housing being lifted and positioned onto the mounting bracket.

Diagram shows motor housing (B) being attached to the ceiling mount.

Parts Used: B

Step 5: Secure Motor Housing

Secure the motor housing (B) to the ceiling mount. The diagram indicates a click-in mechanism or securing points.

Diagram shows motor housing (B) being secured to the ceiling mount.

Step 6: Connect Internal Wiring

Connect the internal wiring from the motor housing to the house wiring. Use the provided wire connectors (M, N). Pay attention to wire colors and connections.

Diagram shows wire connectors (M, N) being used to join wires. Warning symbol present.

⚠️ Ensure correct wire connections.

Parts Used: M, N

Step 7: Attach Ceiling Mount Cover

Attach the ceiling mount cover (B) over the wiring and mounting bracket. The diagram shows the cover being slid into place.

Diagram shows ceiling mount cover (B) being attached.

Parts Used: B

Step 8: Secure Ceiling Mount Cover

Secure the ceiling mount cover (B) using screws (I x2). The diagram shows screws being inserted and tightened.

Diagram shows cover (B) being secured with screws (I).

Parts Used: B, I

Tools: Screwdriver

Step 9: Attach Blade Brackets to Motor

Attach the blade brackets (D) to the motor housing. The diagram shows brackets being aligned and secured with screws.

Diagram shows blade brackets (D) being attached to the motor housing with screws.

Parts Used: D

Tools: Screwdriver

Step 10: Attach Fan Blades

Attach the fan blades (C) to the blade brackets (D) using screws, washers, and nuts (F x12). Ensure blades are oriented correctly.

Diagram shows fan blade (C) being attached to blade bracket (D) using hardware (F). Tools: wrench and screwdriver.

Parts Used: C, D, F

Tools: Screwdriver, Wrench

Step 11: Mount Assembled Blades to Motor

Attach the assembled fan blades and brackets to the motor housing. The diagram shows the blades being aligned and secured with screws (J x8).

Diagram shows assembled blades/brackets being attached to the motor housing with screws (J).

Parts Used: Assembled Blades/Brackets, J

Tools: Screwdriver

Step 12: Final Blade Tightening

Ensure all screws (J) attaching the blades to the motor are fully tightened.

Diagram shows final tightening of screws (J).

Tools: Screwdriver

Step 13: Install Light Kit Fixture

Install the light kit fixture (E). Connect the wiring from the fixture to the fan's wiring harness. The diagram shows wire connections and the fixture being attached.

Diagram shows light kit fixture (E) being installed and wires connected.

Parts Used: E

Step 14: Connect Light Bulb Socket

Connect the light bulb socket within the fixture. Be careful during this step.

Diagram shows connection of the light bulb socket. Warning symbol and crossed-out screwdriver icon present.

⚠️ Exercise caution when connecting the light socket.

Parts Used: E

Step 15: Secure Light Kit

Secure the light kit fixture (E) in place. The diagram shows it being attached.

Diagram shows light kit fixture (E) being secured.

Parts Used: E

Step 16: Final Assembly Check

The fan is now fully assembled. The diagram shows the complete fan.

Diagram shows the fully assembled ceiling fan.

Step 17: Attach Pull Chains

Attach the pull chains (G) to the fan for speed and light control. The diagram shows the chains being threaded through.

Diagram shows pull chains (G) being attached.

Parts Used: G