GLOBO 31811S Outdoor Motion Sensor Light

Product Overview

This document provides essential information for the GLOBO 31811S outdoor lighting fixture.

Brand: GLOBO LIGHTING

Model: 31811S

Website: www.globo-lighting.com

Protection Rating: IP44 (Protected against solid objects >1mm and water splashes from any direction).

Included Components: Sensor included.

Exclusions: Light bulb not included.

Installation and Features

The fixture is designed for outdoor use and features an integrated motion sensor.

Assembly and Wiring

Refer to the diagrams for assembly and wiring instructions:

• Diagram A: A hand is shown turning a switch downwards to the "OFF" position.
• Diagram B: An exploded view of the light fixture components.
  • Wall mounting bracket [1]
  • Wire connectors/terminal block for connecting internal wires [2]
  • Internal terminal block with connections labeled N, L, L [3]
  • The motion sensor unit [4]
  • The E27 bulb socket [5]
  • Screws for securing parts [6]
  • Main terminal block for power supply connection, labeled N (Neutral) and L (Live) [7]
• Wiring: Connect the mains supply to the terminal block [7] (N, L). Internal wiring connects to terminal block [3] (N, L, L).

Sensor Adjustments

The integrated sensor allows for customization of detection:

• Detection Range: Adjustable from 6m to 10m.
• Detection Angle: 120°.
• Sensitivity (SENS): Adjusts the motion detection sensitivity.
• Time (TIME): Controls how long the light stays on after motion is detected. Possible settings include approximately 10 seconds, 1 minute, and 5 minutes.
• Lux (LUX): Adjusts the ambient light level at which the sensor becomes active, allowing it to operate only in darkness or at dusk.

Diagram C: A hand is shown turning a switch upwards to the "ON" position.

Technical Specifications

• Bulb Type: 1xMAX 28W E27
• Power Supply: 220-240V~50Hz

Manufacturer Information

Manufacturer: GLOBO Handels GmbH

Address: Gewerbestrasse 3, A-9184 Sankt Peter AUSTRIA