GLOBO Lighting
Product: 3159-3BC Outdoor Light Fixture
Installation Instructions
This guide provides step-by-step instructions for installing the GLOBO 3159-3BC outdoor light fixture.
Step 1: Mounting the Base
Secure the base of the light fixture to the ground. Insert the provided anchors (1) into the prepared concrete base, following the downward insertion arrows.
The diagram shows three cylindrical anchors labeled '1' being driven into a dotted surface representing concrete, with downward arrows indicating insertion.
Step 2: Electrical Wiring
Connect the power supply wires to the appropriate terminals within the junction box: Neutral (N), Earth (⏚), and Live (L). Ensure all connections are secure.
The diagram illustrates a junction box with terminals labeled 'N', '⏚' (Earth symbol), and 'L'. Wires are depicted connecting to these terminals. An arrow points downwards towards a cover plate.
Step 3: Assembling Pole Sections
Connect the lower pole section to the base and then attach subsequent sections, as indicated by the assembly guide (3).
The diagram shows multiple cylindrical pole sections being stacked vertically. An arrow labeled '3' points to the connection point between sections, indicating assembly.
Step 4: Fastening Components
Use the provided screws (4) and a screwdriver ? to tighten all connections, following the rotational arrows.
The diagram shows screws labeled '4' and a screwdriver symbol with a rotational arrow, indicating fastening.
Step 5: Installing the Light Bulb
Screw a compatible light bulb into the socket (5) ?.
The diagram shows a light bulb being screwed into a socket. An arrow labeled '5' points to the bulb.
Step 6: Attaching the Top Cover
Place and secure the protective top cover (6) onto the fixture.
The diagram shows a cylindrical cap being placed on top of the fixture. An arrow labeled '6' points to the cap.
Operation
To turn the light ON: A hand is shown pressing a switch to the 'ON' position.
To turn the light OFF: A hand is shown pressing a switch to the 'OFF' position.
Two small diagrams illustrate a hand operating a switch, one labeled 'ON' and the other 'OFF'.
Manufacturer Information
For more information, please visit:
GLOBO Handels GmbH
Gewerbestrasse 3
A-9184 Sankt Peter
AUSTRIA
