YITAHOME JSJYB-V2 5-Drawer Storage Chest
Model Numbers: JSJYB-V2, FTBFSD-0002, FTBFSD-0014, FTBFSD-0107, FTBFSD-0155
Contact Information
For questions about the installation of YITAHOME products, please email: after-sale.cs@hotmail.com.
For Amazon.com orders, log into your Amazon account, go to "Your Orders", find the purchase, and click "Contact Seller".
Product Description
This document provides installation instructions for the YITAHOME 5-Drawer Storage Chest (Model JSJYB-V2).
[Diagram: Line drawing of a 5-drawer storage chest with a wooden top and fabric drawers.]
Important Notes & Warnings
- Do not tighten screws until assembly is complete.
- The drawer storage towers are lightweight and can be pulled down, posing a danger, especially to children playing.
- Professional installation is highly recommended.
- Ensure Part 6 is oriented correctly during assembly: the side with a small mounting hole in the center and two larger adjacent holes should face upward.
Parts List
| Item No. | Description | Quantity |
|---|---|---|
| 1 | [Rectangular panel with multiple circular mounting holes] | 1 pc |
| 2 | [Rectangular panel with multiple circular mounting holes] | 1 pc |
| 3 | [Rectangular panel with multiple circular mounting holes] | 1 pc |
| 4 | [Rectangular panel with long grooves along the top and bottom edges] | 2 pcs |
| 5 | [Thin, straight metal bar, likely a shelf support] | 1 pc |
| 6 | [Longer, thin, straight metal bar, likely a structural support] | 2 pcs |
| 7 | [Longer, thin, straight metal bar, likely a structural support] | 2 pcs |
| 8 | [Small cylindrical dowels or pins] | 4 pcs |
| 9 | [Short screws, labeled M6X8mm] | 6 pcs |
| 10 | [Longer screws, labeled M6X30mm] | 16 pcs |
| 11 | [Small, pointed fastener or screw] | 1 pc |
| 12 | [Collapsible fabric box, forming the drawer body] | 3 pcs |
| 13 | [Rectangular fabric panel, forming the front of the drawer, with a handle] | 3 pcs |
| 14 | [Thin, rectangular panel, likely for the back of the unit] | 2 pcs |
| 15 | [Rectangular panel, likely for the sides of the unit] | 2 pcs |
| 16 | [Medium-length screws, labeled M4X10mm] | 10 pcs |
| 17 | [Small, flat-headed fasteners or connectors] | 5 pcs |
Assembly Instructions
Step 1
Assemble the base and side structure using parts 1, 2, 3, 4, and 9.
[Diagram: Shows parts 1, 2, 3 forming the base, with part 4 attached to the sides and part 9 used as fasteners.]
Step 2
Attach support bars (parts 5 and 6) and screws (part 10) to the structure.
[Diagram: Shows parts 5 and 6 attached horizontally, and part 10 screws used. Includes a close-up detail of part 6 showing the correct orientation of mounting holes: small hole in the center, larger holes facing upward.]
Step 3
Attach more support bars (part 7) and fasteners (parts 8 and 10) to the structure.
[Diagram: Shows parts 7, 8, and 10 being attached to the frame.]
Step 4
Continue attaching support bars (part 7) and fasteners (parts 8 and 10).
[Diagram: Shows more parts 7, 8, and 10 being secured to the frame.]
Step 5
Assemble the fabric drawers. Attach drawer front panels (part 13) to the drawer boxes (part 12) using screws (part 16).
[Diagram: Shows a fabric drawer box (12) with a front panel (13) being attached using screws (16).]
Step 6
Insert the assembled fabric drawers into the main frame.
[Diagram: Shows the main frame of the storage chest with the assembled fabric drawers being slid into place.]
Step 7
Attach the back panel (part 14) and side panels (part 15) to the frame using screws (parts 16 and 17).
[Diagram: Shows the back panel (14) and side panels (15) being attached to the rear and sides of the chest using screws (16 and 17).]
Step 8
Installation is complete.
[Diagram: Shows the fully assembled 5-drawer storage chest.]
Installation Completed
