YITAHOME 4-Drawer Storage Chest Assembly Instructions
Models: FTBFSD-0000, FTBFSD-0012
Contact Us
For questions about installation, contact YITAHOME at:
- Phone: +1 (888) 717-8084 (Mon-Fri 8:00 AM-4:30 PM PST / Sat. 8:00 AM-12:00 PM PST)
- Email: after-sale.cs@hotmail.com
For Amazon.com orders:
- Log into your Amazon account.
- Go to "Your Orders" and find the purchase.
- Click on "Contact Seller".
Assembly Overview
Attention: Do not tighten the screws until you have complete setup assembly.
Tools Required For Assembly
| Item No. | Reference Image Description | Quantity |
|---|---|---|
| 1 | Side Frame (x2) | 1 pc |
| 2 | Side Frame (x2) | 1 pc |
| 3 | Back Panel | 1 pc |
| 4 | Drawer Support Bar | X2 |
| 5 | Foot Peg | X4 |
| 6 | Screw (M4*30mm) | X4 |
| 7 | Screw (M4*12mm) | X4 |
| 8 | Allen Wrench | 1 pc |
| 9 | Drawer Front Panel | X4 |
| 10 | Drawer Side Panel | X4 |
| 11 | Drawer Back Panel | X8 |
| 12 | Drawer Bottom Panel | X4 |
| 13 | Drawer Handle | X2 |
| 14 | Handle Screw (M4*20mm) | X2 |
Step 1
Attach drawer support bars (4) to the side frames (1, 2) using screws (6). Insert foot pegs (5) into the bottom of the side frames.
Diagram shows two side frames being connected by two horizontal bars at the top and bottom. Foot pegs are shown at the bottom corners.
Step 2
Slide the back panel (3) into the grooves on the side frames. Secure the back panel using screws (7).
Diagram shows the back panel being inserted into the assembled frame and secured with screws.
Step 3
Attach the bottom panel to the frame using screws (5).
Diagram shows the bottom panel being attached to the assembled frame with screws.
Step 4
Assemble the drawers. Attach drawer side panels (10) and drawer back panel (11) to the drawer front panel (9). Slide the drawer bottom panel (12) into the grooves. Attach drawer handles (13) using handle screws (14).
Diagram shows the process of assembling a single drawer, including attaching sides, back, bottom, and handle.
Step 5
Insert the assembled drawers into the storage chest frame.
Diagram shows drawers being slid into the chest.
Step 6
Attach drawer handles (13) to the drawer fronts using handle screws (14).
Diagram shows the drawer handles being attached to the drawer fronts.
Step 7
Attach the drawer handles (13) to the drawer fronts using handle screws (14).
Diagram shows the drawer handles being attached to the drawer fronts.
Step 8
Complete Installation.
⚠️ Attention: Please be aware that the drawer storage towers are lightweight, and pulling them down could be dangerous, especially when children are playing and chasing each other around the drawers.
