Instruction Manual
WIFI AUTOMATIC WATERING PUMP KIT
Model: IK10P
Customer Support
Email: service@rainpointus.com
WhatsApp: +1 626-780-5952
Free Hotline US: +1 833-381-5659 (MON-FRI 9:30 AM-5:30 PM PST)
Free Hotline EU: +44 800-808-5337 (MON-FRI 9:00 AM-5:00 PM CET)
WELCOME TO RAINPOINT
Dear friend,
Thanks for choosing RAINPOINT WiFi automatic watering system! Your satisfaction as a RAINPOINT customer means everything to us.
Before using this unit, please read these operating instructions carefully, take special care to follow the warning and safety suggestions. If you have any question or problem during using our product, please contact our customer service and your problem will be solved within 24hrs.
Contact on Amazon: Click on "Ask a question"
PRODUCT OVERVIEW
1. Package Includes
| Accessories Included | Name | PCS | Function |
|---|---|---|---|
| [USB symbol] | USB Cable | 1 | Power supply |
| [Coiled hose symbol] | Tubing | 1 | Len: 10m/32.8 Ft Inner diameter of pipe: 0.17" (> 1/6") Outside diameter of pipe: 1/4" |
| [Filter symbol] | Filter | 1 | Filtering impurities from water |
| [Tubing end cap symbol] | Tubing End Caps | 3 | Stop water flow at the end of the pipe |
| [Drip emitter symbol] | Micro Drip Emitters | 10 | Inserted into the soil to water the plant root directly |
| [Straight connector symbol] | Straight Barb Fitting | 3 | Connecting water pipes |
| [T-connector symbol] | T Barb Fitting | 10 | Split water and connect pipes |
| [Cross connector symbol] | Cross Barb Fitting | 3 | Split water and connect pipes |
| [Hook symbol] | Detachable Hook | 1 | Put it on the timer to make the timer hangable |
| [Check valve symbol] | Check Valve | 1 | Prevents water from backing up in the pipes back to the pump |
2. Technical Parameter
| Inlet | 4mm |
| Outlet | 4mm |
| Maximum water pressure | 0.3Bar |
| Water flow | 0.4L/Min |
| Pump Head | 3-5m |
| Working temperature | 0°C to 50°C (37°F-122°F) |
| Power supply way | 1. AA Battery x4 (not included) 2. USB power supplier (DC 5V 1A) |
3. Introduction Of Buttons And Indicators
| Control/Indicator | Description |
|---|---|
| "OK" Button |
|
| "▲" Button | Increase the number, hold to accelerate. |
| "▼" Button | Decrease the number, hold to reduce faster. |
| How Long | Watering Duration: 20s - 30min |
| How Often | Watering Frequency: 1h-23h or 1day - 7days |
| Delay | Delay the watering plan: 1h - 24h |
| Remaining | The remaining watering time of the current period. |
| Next | The next watering time. |
| 🌷 | It is watering. |
| 💧⚡ | Currently shortage of water. |
| [Manual symbol emoji] | Manually operation setting. |
| [USB plug emoji] | Connected with the USB charger. |
| 🔋 | Low power. |
Two Power Supply Methods
1.1 Insert 4*AA 1.5V alkaline batteries
Description: The pump can be powered by 4 AA 1.5V alkaline batteries (not included).
Instructions:
- Remove the battery tray back of the pump.
- Insert 4 brand new AA (1.5V) alkaline batteries as the marked "-" and "+" direction.
- Firmly reinstall the battery cover back into the pump.
Note:
- Firmly restore the battery cover to ensure water resistance.
- When the unit is idle, please remove the batteries and store them properly.
- Used batteries must be removed from the pump.
- Do not dispose of batteries in fire, as this may cause them to explode or leak.
1.2 Plug in the USB cable for power
Description: The pump can also be powered via a USB cable (included).
Instructions:
- Plug in the USB cable (included).
- When the power is on, the [USB plug indicator symbol] indicator will light up.
Note:
- It is recommended to use USB power supply where available for a stable voltage and improved efficiency.
- When both power modes are used simultaneously, the USB cable power will be prioritized. When the USB cable is disconnected, the battery-powered mode will be activated.
2. Determine the Correct Placement
2.1 Water Level and Siphoning
Description: Please do not put the pump below the water level of the reservoir to effectively avoid the siphoning phenomenon. The siphoning effect can cause water leaking and over-watering problems.
Diagram:
[Diagram showing a pump placed below a water reservoir with a red cross (X) indicating incorrect placement, and a pump placed above the reservoir with a green check mark (✔️) indicating correct placement.]
2.2 Lift Length
Description: The lift length of the water pump is typically 2-3m. Because the water pipe cannot be placed 100% straight, we recommend that the vertical height between the plants and the pump should not exceed 2.5m.
Diagram:
[Diagram showing a pump with a vertical line labeled 'T'. On the left, 'T > 2.5m' with a red cross (X) indicating incorrect. On the right, 'T < 2.5m' with a green check mark (✔️) indicating correct.]
3. Connect the Hose Correctly
3.1 Cutting the Hose
Cut the hose according to the distance of the device, the plant, or your needs.
Diagram: [Illustration of scissors cutting a hose.]
3.2 Preparing the Hose End
Put the head of the hose into hot water for 10 seconds or put a little veggie oil on the end of the hose before connecting.
Diagram: [Illustration of a hose end being dipped into a cup labeled 'veggie oil' or hot water.]
3.3 Connecting to Inlet and Outlet
Connect the hose to the water inlet and outlet ports on the pump.
Diagram: [Illustration showing hose connections to the pump's inlet and outlet ports.]
3.4 Connecting the Check Valve
Connect the check valve to the water outlet near the pump. Using a check valve may reduce water pressure. The check valve must be installed correctly in accordance with the flow direction.
Diagram: [Illustration of a check valve being connected to a hose.]
3.5 Connecting to the Water Inlet with Filter
Insert the other end of the hose connected to the water inlet of the pump with the filter, and then put it into the water container.
Diagram: [Illustration showing the hose with a filter being placed into a water container.]
3.6 Connecting Barb Fittings
Use the appropriate barb fittings for your hose configuration:
- Straight Barb Fitting: If only the hose needs to be connected directly. [Illustration of a straight barb fitting.]
- "T" Barb Fitting: When you need to connect the hose while splitting to two ways. [Illustration of a T-shaped barb fitting.]
- Cross Barb Fitting: When you need to connect a hose while splitting to three ways. [Illustration of a cross-shaped barb fitting.]
3.7 Using Micro Drip Emitters
When water needs to be delivered directly to the soil, use the micro drip emitters.
Tips: Loosen the soil first, then insert the drips at least 3 inches deep, which will help water enter the plant roots.
Diagram: [Illustration of micro drip emitters inserted into soil.]
3.8 Installing Tubing End Caps
Please install Tubing End Caps after water flows out from the end of the pipe to avoid air in the pipe, ensuring water flows smoothly to the end of the pipe.
Diagram: [Illustration of tubing end caps.]
4. Installation Completed and Tested
- Press and hold the "OK" button to start the pump; water will be pumped to your plants.
- Check if there is any leakage in the connection part of the hose. If so, it means it is not tightened enough; please keep tightening until no leakage.
- After testing with no usage problems, proceed to the next step: WiFi setup and programming the watering schedule.
OPERATING INSTRUCTIONS
STEP 1: HOW LONG (Watering Duration)
Press the "OK" button. "HOW LONG" will light up. Press the "▲" or "▼" buttons to set the watering duration, then press "OK" to confirm and proceed to the next step. (Watering duration can be set from 20 seconds to 30 minutes).
Diagram: [Illustration of the unit display showing "HOW LONG 03 SEC".]
STEP 2: HOW OFTEN (Watering Frequency)
When entering the "HOW OFTEN" setting mode, "Every" and "How Often" on the screen will light up simultaneously. Press the "▲" or "▼" buttons to set the watering frequency from 1 hour to 23 hours or 1 day to 7 days, then press the "OK" button to confirm and proceed to the next step.
Diagram: [Illustration of the unit display showing "HOW OFTEN 06 HRS".]
STEP 3: DELAY MODE
When the screen shows "DELAY", use the "▲" and "▼" buttons to select the watering delay schedule from 0 hours to 24 hours, then press the "OK" button to save the schedule.
Note: If "How Often" or "How Long" has been changed during setting and the delay time is set to 0 hours, the watering pump will automatically turn on manual watering (watering duration is 20s).
For example: When the watering schedule is changed and the delay mode is set to 0 hours, the pump will automatically turn on manual watering.
Diagram: [Illustration of the unit display showing "DELAY 09 HRS".]
STEP 4: AUTOMATIC WATERING
- Press "OK" again. The "Remaining" and "Watering Icon" will light up, and the system will start watering according to the schedule automatically. The countdown of remaining watering time will be displayed.
- When the watering program is finished, the "NEXT" icon lights up, indicating the remaining time until the next watering.
Note: During setting, if there is no operation within 8 seconds, the pump will automatically quit the setting mode. If "How Often" or "How Long" has been changed during setting, it will automatically start running as changed.
Setting Example:
- If you want to water your plants for 30 seconds at 9:00 AM every day, please set "HOW LONG" to 30s, "HOW OFTEN" to 1 day, and "DELAY" to 0. Set the device time to 9:00 AM. After setting is finished, the watering pump timer will work automatically every day at 9:00 AM to water for 30 seconds.
- If it is currently 7:00 AM, and you want to water your plants for 1 minute at 10:00 AM, please set "HOW LONG" to 1min, "HOW OFTEN" to 1 day, "Delay" to 3 hours. The first watering will start at 10:00 AM, and subsequent watering will start at 10:00 AM with a 1-day interval.
Diagram: [Illustration of the unit display showing "Remaining 03 MIN" and the watering icon, and another showing "Next 88 HRS" with the watering icon.]
MANUAL MODE
Press and hold the "OK" button to enter the manually watering mode.
Diagram: [Illustration of the unit display showing "Remaining 03 MIN".]
Warning Alarm
1. Lacking Water Alarm
When the 💧⚡ icon appears on the screen, please check if there is a shortage of water in the tank and fill enough water in time. The pump timer will continue working as scheduled.
Diagram: [Illustration of the unit display showing "Next 02 HRS" and the water shortage icon.]
2. Low Battery Alarm
When the display shows the 🔋 icon and it is flashing, it means the battery is low.
Diagram: [Illustration of the unit display showing "Next 12 HRS" and a flashing low battery icon.]
TROUBLESHOOTING
| Problem | Possible Cause | Possible Solution |
|---|---|---|
| Uneven water flow | Too far away from pots and water containers or too long pipes can reduce the pump's pumping efficiency. | The further away the potted plant is from the pump, the weaker the water flow will become. Please use some clamps to hold the first few branches so that the mainstream water can be delivered quickly and for a long time. |
| Hard to insert and remove water pipes | Because of the material, in order to make the pipe more durable. | Put the head of the hose into hot water for 10s or put a little veggie oil on the end of the hose before connecting. |
| Watering schedule not on time | The lack of water at the inlet resulted in the plan not being implemented on time. | Check if there is a lack of water in the container at the inlet. (If there is a leakage, the schedule will not run). |
| The water pump unexpectedly lost power and the plan was emptied. | The watering schedule needs to be reset. |
If your Rainpoint product does not operate properly after trying the troubleshooting steps, please contact us by phone or email:
US: 1-833-381-5659 (EN) (MON-FRI 9:30 AM-5:30 PM PST)
EU: +44 800-808-5337 (EN DE) (MON-FRI 9:00 AM-5:00 PM CET)
Email: service@rainpointus.com
WARRANTY
RainPoint provides a 1-year warranty against manufacturing defects in materials and workmanship from the date of purchase. During the warranty period, RainPoint will replace, free of charge, any product found to be defective under reasonable use and service, as determined solely by RainPoint.
To place a warranty request, please email us with your order ID at service@rainpointus.com and we will respond within 24 hours.
CUSTOMER SERVICE
Still have trouble with setup? Please search for "RainPoint" on YouTube for installation videos. If the user manual doesn't have what you're looking for or you need other help, please contact us before returning the product to the store and let us know the Model NO. and LOT NO. of your device.
Model NO.: xxxxxxxxxx (on the back of the pump label)
LOT NO.: xxxxxxxxxxx (on the back of the pump label)
US Free Hotline (English): +1 833-381-5659 (MON-FRI 9:30 AM-5:30 PM PST)
UK Free Hotline (English Deutsch): +44 800-808-5337 (MON-FRI 9:00 AM-5:00 PM CET)
Email: service@rainpointus.com
WhatsApp: +1 626-780-5952
Support: https://www.rainpointonline.com/pages/support
EC REPRESENTATIVE
NAME: VIAJE ELECTRONIC COMPANY LIMITED
ADDRESS: E588, 13 ADELAIDE ROAD, DUBLIN, D02 P950, IRELAND
Email: VIAJEELE@outlook.com
[CE mark] Made In China
[Recycling symbol for packaging] [Recycling symbol for electronics] [Battery symbol] [Battery symbol] [Battery symbol] [Battery symbol] (Not included)
Sign Up Save Water & Money with Smart Irrigation System – RainPoint
