COSTWAY EP24665US Crystal Chandelier
User's Manual
Important Safety Information
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Parts List
The following parts are included in the package:
- Ceiling hook: A metal hook for ceiling mounting. (x1)
- Canopy cover: A decorative cover for the ceiling mount. (x1)
- Hanging chain: A metal chain for adjusting the light's height. (x1)
- Gloves: Protective gloves for handling parts. (x2)
- Wiring cap: Plastic caps for connecting electrical wires. (x2)
- Mounting screws: Screws for securing the mounting bracket. (x2)
- Wall anchors: Plastic anchors for mounting in drywall. (x2)
- Top bowl with 6 holes: The upper decorative bowl piece with six attachment points. (x1)
- Glass bowl with 4 holes: The main glass lamp shades, each with four attachment points. (x6)
- Main body/stem assembly: The central structural component of the chandelier. (x1)
- Wire connectors/tubes: Glass tubes or sleeves that fit over the light sockets. (x6)
- Decorative rings: Small rings used in assembly. (x6)
- Wire/cable: Electrical wires for connecting the light sockets. (x6)
- Arm/Elbow piece: A decorative arm piece that extends from the main body. (x1)
- Crystal strings, type A: Decorative crystal strands. (x6)
- Crystal strings, type B: Decorative crystal strands. (x24)
- Crystal strings, type C: Decorative crystal strands. (x6)
- Crystal strings, type D: Decorative crystal strands. (x12)
- Crystal strings, type E: Decorative crystal strands. (x6)
- Crystal strings, type F: Decorative crystal strands. (x1)
- Hardware rings: Metal rings used for attaching decorative elements. (x6)
Installation Instructions
-
Step 1: Fix the 6 glass tubes.
Diagram shows attaching six glass tubes to the central body of the chandelier using small fasteners.
-
Step 2: Thread the main wire through the central body.
Diagram illustrates threading the main electrical wire downwards through the central stem of the chandelier.
-
Step 3: Connect wires.
Diagram shows the electrical connections being made. Wires from the glass tubes are connected to the main wire using wiring caps, twisted clockwise. The other set of wires is connected similarly.
-
Step 4: Install the bottom.
Diagram depicts the attachment of the bottom decorative piece to the main body of the chandelier.
-
Step 5: Tighten the bottom screw.
Diagram shows a screw at the bottom of the chandelier being tightened with a tool. [wrench symbol]
-
Step 6: Set 6 glass rings + 6 hardware rings.
Diagram illustrates placing six glass rings and six hardware rings onto the chandelier's arms.
-
Step 7: Place glass lamp bowls.
Diagram shows attaching six glass lamp bowls (with 4 holes) to the arms and one larger bowl (with 6 holes) to the top section of the chandelier.
-
Step 8: Set the hardware tube.
Diagram illustrates attaching a decorative hardware tube or stem piece.
-
Step 9: Thread the main wire through the hanging chain, then hang the light on the drop chain.
Diagram shows threading the main electrical wire through the hanging chain and then attaching the chandelier to the ceiling mounting hardware.
-
Step 10: Fix the chain and bell.
Diagram depicts securing the hanging chain and attaching the decorative canopy cover to the ceiling mount.
-
Step 11: Hang crystal strings.
Diagrams illustrate the placement of various crystal strings. Hang 6 strings of crystal C in the middle of the 6 lamp bowls on the elbow. Hang 6 strings of crystal A from the large bowl at the top to the inside of the small bowl below. Hang 24 strings of crystal B at 4 holes in the lamp bowl on the elbow. Finally hang 12 crystal D. 6 Strings are placed under the glass ring, and the other 6 strings are under the 6 hardware rings.
-
Step 12: Hang crystal strings.
Diagrams show the placement of crystal strings E at the bottom large bowl and crystal string F at the very bottom of the main body.
-
Step 13: Complete installation.
Diagram shows a light bulb being screwed into a socket. [light bulb] Complete the installation, start installing the bulbs, and test the chandelier to see if it works. Note: The package of this product does not contain bulb.
Office Locations
- US office: Fontana
- UK office: Ipswich
- AU office: Truganina
- DE office: Hamburg
- FR office: Saint Vigor d'Ymonville
- PL office: Gdańsk
