Parts List
- Ground Wire Screw
- Mounting Bracket
- Junction box Screws
- Canopy
- Decorative nut
- Bulb
- Metal Shade
- Finial
Assembly & Installation Instructions
- Connect the wire.
- Install the Mounting Bracket.
- Put on the Canopy and screw on the Decorative nuts.
- Screw on bulbs.
- Put on shade.
- Screw on finial.
Cautions
- Do not remove the lamp with power on.
- Stay away from fire, direct sunshine, high temperature and wetness.
- Never put it in the washing room.
- Do not touch the shade when the power is on for too long to avoid burning your skin.
- Consult a Qualified Electrician to ensure correct Branch circuit conductor.
- Individual grounding conductor should be interwoven through the chain from the luminaire to the canopy.
Warning: California Proposition 65
This product contains lead, a chemical known to the state of California to cause cancer and birth defects or other reproductive harm.
Do not place the product in your mouth. Wash your hands after handling this product.
Notes
- Shade colors will appear darker and less vibrant when not illuminated.
- This stained glass product has been protected with mineral oil as part of the finishing process.
- Please use a soft dry cloth to remove any excess oil.
