Costway Floor Lamp End Table User Manual
Model Numbers: EP24507US / EP24508US
Visit Costway: www.costway.com
Important Safety Information
Please read and keep this instruction booklet for future reference.
⚠️ Warning: Keep all small parts and packaging materials away from babies and children as they potentially pose a serious choking hazard.
Contact Us
Do NOT return this item. Contact the Costway customer service department for assistance.
Email: US: cs.us@costway.com | UK: cs.uk@costway.com
Before You Start
- Please read all instructions carefully.
- Retain instructions for future reference.
- Separate and count all parts and hardware.
- Read through each step carefully and follow the proper order.
- Assemble items near their intended placement area to avoid unnecessary moving.
- Always place the product on a flat, steady, and stable surface.
Note: A soft cloth must be placed on the ground during assembly to prevent scratching the panel surface and affecting its appearance.
Parts List
| Part | Description | Quantity |
|---|---|---|
| A | Cross wrench | 1 PC |
| B | Phillips head screw | 4 PCS |
| C | Double-headed screw | 4PCS |
| D | Lamp bracket | 1PC |
| E | Iron tube and lamp holder | 1PC |
| F | Tabletop panel | 1PC |
| G | Upper stand | 4PCS |
| H | Middle shelf panel | 1PC |
| I | Lower stand | 4CS |
| J | Bottom panel | 1PC |
| K | Decorative round head nut | 1PC |
| L | Velcro magic | 2PC |
| M | EVA gasket | 4PCS |
| N | Lampshade | 1PC |
| O | Hollow-carved designed side panel | 2PCS (Note: The white version does not require side panel installation.) |
Assembly Instructions
Step 1: Aim at the hole position of the tabletop panel (F). Assemble the upper stand (G) and insert the side panel (O) into the pull groove. (Note: The white lampshade version does not require side panel installation.)
Step 2: Connect the middle shelf panel (H) to the upper stand (G) using the double-headed screw (C). Then, assemble the lower stand (I).
Step 3: Place the gaskets (M) in the sequence shown, and secure with the decorative round head nut (K). Connect the electronic master wires to each other.
Step 4: After assembling the iron tube, lock the lamp bracket (D) to the lamp holder (E). Then, lock the lampshade (N) to the lamp bracket with the decorative round head nut (K). Finally, fix the wire to the lower stand (I) using Velcro magic (L).
Usage and Care
The assembly is now complete. The product can be safely used.
Recommendation: Use no more than 100W incandescent bulbs.
Warning: Do not sit or stand on the table top of the lamp.
Customer Feedback
Costway values customer suggestions and comments. Customers are encouraged to visit the shop and leave a rating.
Example feedback: "Great products so far. Fast delivery, easy setup, and working without any issues." - February 24, 2019
Costway aims to provide an EASY SHOPPING EXPERIENCE, GOOD PRODUCTS, and EFFICIENT SERVICE.
US Office: Fontana, California
UK Office: Ipswich
Benefits of shopping with Costway include:
- Reward Points
- Exclusive Customer Service
- Personalized Recommendations
- Permanent Shopping Cart
- Order History
Costway extends heartfelt thanks to all customers for their time in assembling the product and providing valuable feedback.
Thank you!
