JBL Tune 510BT Quick Start Guide

What's in the Box

The package contains the JBL Tune 510BT headphones.

Power On & Connect

To turn on and automatically enter pairing mode, press and hold the power button for more than 5 seconds. On your device, navigate to Bluetooth settings and select "JBL TUNE510BT" to connect.

Manual Pairing: To enter manual pairing mode, turn off the headphones. Then, press and hold the power button for more than 5 seconds. Select "JBL TUNE510BT" to connect.

Button Commands

Power On/Off: Press and hold the power button for >2 seconds.
Play/Pause/Call Management: Press the play/pause button once (▶/II).
Next Track: Press the play/pause button twice quickly (>▶).
Previous Track: Press the play/pause button three times quickly (<▶).
Voice Assistant (Siri/Google Assistant/Bixby): Press the play/pause button twice quickly (>▶).

Multi-Point Connection

Connect up to two Bluetooth devices simultaneously. To switch music sources, pause music on the current device and select play on the second device.

To switch music sources, pause the music on the current device and select play on the 2nd device.
Phone calls will always take priority.
If one device goes out of Bluetooth range or powers off, you may need to manually reconnect the remaining device.
To disconnect multi-point connection, select "Forget This Device" on your Bluetooth devices.

Connecting the 1st Bluetooth Device: Select "JBL TUNE510BT" to connect.

Connecting the 2nd Bluetooth Device: Enter pairing mode with the 2nd device and select "JBL TUNE510BT" to connect.

Charging

Connect the charging cable to charge the headphones. A full charge takes approximately 2 hours. A 5-minute charge provides up to 2 hours of music playtime.

LED Behaviors

Power On/Off: LED indicates power status.
BT Connecting: LED flashes to indicate Bluetooth connection in progress.
BT Connected: LED is solid to indicate a successful Bluetooth connection.
Low Battery: LED flashes red to indicate low battery.
Charging: LED is red while charging.
Fully Charged: LED turns off when fully charged.

Tech Spec

Model: TUNE 510BT
Driver Size: 32 mm / 1.26" Dynamic driver
Power Supply: 5V-1A
Weight: 160 g / 0.35 lbs
Headset Battery Type: Lithium-ion battery (3.7V / 450 mAh)
Charging Time: 2 hrs
Music Playtime with BT on: up to 40 hrs
Frequency Response: 20 Hz - 20 kHz
Impedance: 32 ohm
Sensitivity: 103.5 dB SPL@ 1kHz 1mW
Maximum SPL: 95 dB
Microphone Sensitivity: -29 dBV@1kHz/Pa
Bluetooth Version: 5.0
Bluetooth Profile Version: A2DP v1.3, AVRCP v1.6, HFP v1.7
Bluetooth Transmitter Frequency Range: 2.4 GHz-2.4835 GHz
Bluetooth Transmitted Power: <8 dBm
Bluetooth Transmitted Modulation: GFSK, π/4DQPSK, 8DPSK
Maximum Operation Temperature: 45 °C

	JBL Tune 510BT Quick Start Guide A concise guide to setting up and using your JBL Tune 510BT headphones, covering unboxing, pairing, button commands, multi-point connection, charging, LED indicators, and technical specifications.
	JBL Tune 510BT Quick Start Guide A quick start guide for the JBL Tune 510BT headphones, covering setup, pairing, button commands, multi-point connection, charging, and LED behavior.
	JBL Tune 510BT Quick Start Guide A concise guide to setting up and using your JBL Tune 510BT headphones, covering pairing, button commands, multi-point connection, charging, and LED behavior.
	JBL TUNE 510BT Quick Start Guide A concise guide to setting up and using your JBL TUNE 510BT headphones, covering pairing, button commands, charging, and technical specifications.
	JBL TUNE510BT Quick Start Guide A quick start guide for the JBL TUNE510BT headphones, covering setup, pairing, button commands, multi-point connection, charging, and technical specifications.
	JBL TUNE510BT Quick Start Guide A quick start guide for the JBL TUNE510BT headphones, covering setup, pairing, button commands, multi-point connection, charging, and technical specifications.
	JBL TUNE510BT Quick Start Guide A concise guide to setting up and using your JBL TUNE510BT headphones, covering power, pairing, button commands, multi-point connection, charging, and technical specifications.
	JBL TUNE510BT Quick Start Guide A quick start guide for the JBL TUNE510BT headphones, covering what's in the box, power and connection, manual pairing, button commands, multi-point connection, charging, LED behaviors, and technical specifications.