JBL Tune 510BT Quick Start Guide
What's in the Box
This section outlines the contents of the JBL Tune 510BT package.
Power On & Connect
To turn on the headphones and automatically enter pairing mode, select "BT510TUNE JBL" from your device's Bluetooth settings.
Diagram Description: The diagram shows a smartphone screen with Bluetooth settings open, highlighting "BT510TUNE JBL" as a discoverable and connected device.
Manual Pairing
To manually pair your headphones, turn them off, then turn them back on to enter manual pairing mode. Select "BT510TUNE JBL" from your device's Bluetooth settings to connect.
Diagram Description: Similar to the auto-pairing diagram, this shows the Bluetooth settings on a smartphone, indicating the process for manual pairing.
Button Commands
The headphones feature a multi-function button for various controls:
- Play/Pause/Next/Previous: Single press for play/pause. Double press for next track. Triple press for previous track.
- Volume Control: Press and hold the volume up button to increase volume. Press and hold the volume down button to decrease volume.
- Voice Assistant: Press and hold the multi-function button to activate your device's voice assistant (e.g., Siri, Google Assistant, Bixby).
Diagram Description: The diagram illustrates the headphones with callouts pointing to the buttons and their functions, including volume up/down, multi-function button, and voice assistant activation.
Multi-Point Connection
The JBL Tune 510BT can connect to two Bluetooth devices simultaneously.
- To switch music sources, pause music on the current device and select play on the second device.
- Phone calls will always take priority.
- If one device goes out of Bluetooth range or powers off, you may need to manually reconnect to the remaining device.
- To disconnect from multi-point connection, select "Forget this device" on your Bluetooth devices.
Diagram Description: This diagram shows two Bluetooth devices (e.g., a smartphone and a laptop) connected to the headphones, illustrating the multi-point connection capability.
Charging
Connect the charging cable to the headphones and a power source. The LED indicator will show the charging status.
Diagram Description: The diagram shows the charging port on the headphones and the USB charging cable being connected to a power source. It also depicts the LED indicator's behavior during charging.
LED Behaviors
- Power On/Off: The LED will indicate when the headphones are powering on or off.
- Connecting BT: The LED will flash to show the headphones are attempting to connect via Bluetooth.
- BT Connected: The LED will show a steady light when successfully connected to a Bluetooth device.
- Low Battery: The LED will indicate a low battery status.
- Charging: The LED will show the charging status.
- Fully Charged: The LED will indicate when the headphones are fully charged.
Diagram Description: This section visually represents the different LED color patterns and their corresponding meanings (e.g., solid blue for connected, flashing blue for pairing, red for low battery).
Tech Specs
- Model: BT510 TUNE
- Driver Size: 32 mm / 1.26 " Dynamic driver
- Power Supply: 5 V 1 A
- Weight: 160 g / 0.35 lbs
- Headset Battery Type: Lithium-ion battery (3.7 V / 450 mAh)
- Charging Time: 2 hours
- Music Playtime with BT on: Up to 40 hours
- Frequency Response: 20 Hz – 20 kHz
- Impedance: 32 ohm
- Sensitivity: 103.5 dB SPL @ 1 kHz1 mW
- Maximum SPL: 95 dB
- Microphone Sensitivity: -29 dBV/Pa @ 1 kHz
- Bluetooth Version: 5.0
- Bluetooth Profile Version: HFP 1.7v, AVRCP 1.3, HSP 1.2, A2DP 1.3
- Bluetooth Transmitter Frequency Range: 2.4 GHz – 2.4835 GHz
- Bluetooth Transmitted Power: <8 dBm
- Bluetooth Transmitted Modulation: GFSK, π/4DQPSK, 8DPSK
- Maximum Operation Temperature: 45° C
Battery Care
To prolong the battery's lifespan, charge it fully at least once every 3 months. Battery lifespan varies according to usage and settings.
