JBL TUNE510BT Quick Start Guide
What's in the Box
The package includes the JBL TUNE510BT headphones.
Power On & Connect
To power on and automatically enter pairing mode, press and hold the power button for more than 2 seconds.
On your device's Bluetooth settings, choose "JBL TUNE510BT" to connect.
To power off, press and hold the power button for more than 5 seconds.
To enter manual pairing mode, press and hold the power button for more than 5 seconds.
Button Command
- Press the power button once: Play/Pause music, Answer/End call.
- Press the power button twice: Next track.
- Press the power button three times: Previous track.
- Press and hold the power button for 2 seconds: Activate Siri/Google Assistant/Bixby.
Multi-Point Connection
Connect up to two Bluetooth devices simultaneously.
- To switch music sources, pause music on the current device and select play on the second device.
- Phone calls always take priority.
- If one device goes out of Bluetooth range or powers off, you may need to manually reconnect the remaining device.
- To disconnect multi-point, select "Forget This Device" on your Bluetooth devices.
To enter pairing mode with the second device, press and hold the power button for more than 2 seconds.
Charging
Charging the headphones takes approximately 2 hours. A 5-minute charge provides up to 2 hours of music playtime.
LED Behaviors
- Power On/Off: Indicated by LED behavior.
- BT Connecting: LED indicates connection status.
- BT Connected: LED indicates connection status.
- Low Battery: LED indicates low battery status.
- Charging: LED indicates charging status.
- Fully Charged: LED indicates fully charged status.
Tech Spec
| Model: | TUNE 510BT |
|---|---|
| Driver Size: | 32 mm / 1.26" Dynamic driver |
| Power supply: | 5V-1A |
| Weight: | 160 g / 0.35 lbs |
| Headset battery type: | Lithium-ion battery (3.7V / 450 mAh) |
| Charging time: | 2 hrs |
| Music playtime with BT on: | up to 40 hrs |
| Frequency response: | 20 Hz - 20 kHz |
| Impedance: | 32 ohm |
| Sensitivity: | 103.5 dB SPL@ 1kHz 1mW |
| Maximum SPL: | 95 dB |
| Microphone sensitivity: | -29 dBV@1kHz/Pa |
| Bluetooth version: | 5.0 |
| Bluetooth profile version: | A2DP v1.3, AVRCP v1.6, HFP v1.7 |
| Bluetooth transmitter frequency range: | 2.4 GHz-2.4835 GHz |
| Bluetooth transmitted power: | <8 dBm |
| Bluetooth transmitted modulation: | GFSK, π/4DQPSK, 8DPSK |
| Maximum operation temperature: | 45 °C |
