JBL Tune 510BT Quick Start Guide
This guide provides essential information to get you started with your JBL Tune 510BT headphones.
What's in the Box
The package typically includes:
- JBL Tune 510BT Headphones
- USB-C Charging Cable
- User Manual / Quick Start Guide
- Warranty Card
[Image description: A diagram showing the contents of the JBL Tune 510BT box, including the headphones, charging cable, and documentation.]
Power On & Connect
Power On and Automatic Pairing: Press and hold the power button for 2 seconds. The headphones will automatically enter pairing mode. [Image description: A diagram showing the power button being pressed for 2 seconds, with an indicator that the headphones are entering pairing mode.]
Connecting to a Device: On your device (phone, tablet, computer), go to Bluetooth settings and select "JBL TUNE510BT" to connect. [Image description: A screenshot of a smartphone's Bluetooth settings showing "JBL TUNE510BT" as a connected device.]
Manual Pairing Mode: To enter manual pairing mode, press and hold the power button for more than 5 seconds. [Image description: A diagram showing the power button being pressed for over 5 seconds to activate manual pairing mode.]
Power Off: Press and hold the power button for 2 seconds to turn off the headphones. [Image description: A diagram showing the power button being pressed for 2 seconds to turn off the headphones.]
Manual Pairing
To manually pair your headphones, ensure they are turned off, then press and hold the power button for over 5 seconds until the LED indicator flashes blue. Select "JBL TUNE510BT" from your device's Bluetooth list.
[Image description: A step-by-step visual guide showing how to put the headphones into manual pairing mode and connect via Bluetooth settings.]
Button Command
The buttons on the headphones allow for various controls:
- Power Button: Power On/Off (press and hold), Pairing Mode (press and hold >5s), Voice Assistant (press x1).
- Volume Up Button: Volume Up (press x1), Next Track (press and hold).
- Volume Down Button: Volume Down (press x1), Previous Track (press and hold).
- Multi-function Button: Play/Pause Music (press x1), Answer/End Call (press x1), Reject Call (press and hold), Activate Voice Assistant (press x1).
[Image description: A detailed diagram illustrating the functions of each button on the JBL Tune 510BT headphones, including single press, double press, and long press actions.]
Multi-point Connection
The JBL Tune 510BT can connect to two Bluetooth devices simultaneously.
- Connect the first device.
- Turn off Bluetooth on the first device.
- Press and hold the power button for >5s to enter pairing mode with the second device.
- Connect the second device.
- Turn on Bluetooth on the first device.
Switching Audio Sources: Pause music on the current device and select play on the second device.
Important Notes:
- Phone calls always take priority.
- If one device goes out of Bluetooth range or powers off, you may need to manually reconnect the remaining device.
- To disconnect multi-point, select "Forget this device" on your Bluetooth devices.
[Image description: A diagram illustrating the process of connecting to two Bluetooth devices simultaneously, showing the steps for pairing the second device and switching between them.]
Charging
Connect the USB-C cable to the headphones and a power source. A full charge takes approximately 2 hours. A 5-minute charge provides up to 2 hours of music playtime.
[Image description: A diagram showing the USB-C charging cable connected to the headphones, with an indicator for charging status.]
LED Behaviors
The LED indicator shows the status of the headphones:
- Solid Blue: Bluetooth Connected
- Flashing Blue: Bluetooth Connecting / Pairing Mode
- Solid Red: Charging
- Off (while plugged in): Fully Charged
- Flashing Red: Low Battery
[Image description: A table or list showing different LED colors and patterns and their corresponding meanings (e.g., charging, connected, low battery).]
Technical Specifications
| Model | TUNE 510BT |
| Driver Size | 32 mm / 1.26" Dynamic driver |
| Power Supply | 5V-1A |
| Weight | 160 g / 0.35 lbs |
| Headset Battery Type | Lithium-ion battery (3.7V / 450 mAh) |
| Charging Time | Up to 2 hrs |
| Music Playtime with BT On | Up to 40 hrs |
| Frequency Response | 20 Hz - 20 kHz |
| Impedance | 32 ohm |
| Sensitivity | 103.5 dB SPL@ 1kHz 1mW |
| Maximum SPL | 95 dB |
| Microphone Sensitivity | -29 dBV@1kHz/Pa |
| Bluetooth Version | 5.0 |
| Bluetooth Profile Version | A2DP v1.3, AVRCP v1.6, HFP v1.7 |
| Bluetooth Transmitter Frequency Range | 2.4 GHz-2.4835 GHz |
| Bluetooth Transmitted Power | <8 dBm |
| Bluetooth Transmitted Modulation | GFSK, π/4DQPSK, 8DPSK |
| Maximum Operation Temperature | 45 °C |
