JBL Tune 510BT Quick Start Guide

What's in the Box

Power On & Connect

Turn on the headphones and they will automatically enter pairing mode. Select "BT510TUNE JBL" from your Bluetooth device's settings to connect.

Manual Pairing

Turn off the headphones. Press and hold the power button until the LED indicator flashes blue and red to enter manual pairing mode. Select "BT510TUNE JBL" from your Bluetooth device's settings to connect.

Button Command

Press the power button once to play/pause music or answer/end calls.
Press and hold the power button to turn the headphones on/off.
Press and hold the power button for a longer duration to activate voice assistant (Siri/Google Assistant).
Press the volume up button to increase volume.
Press the volume down button to decrease volume.
Press and hold the volume up button to skip to the next track.
Press and hold the volume down button to go to the previous track.

Multi-point Connection

Connect to the first Bluetooth device.
To connect to a second device, turn off Bluetooth on the first device, then turn on pairing mode on the headphones and select "BT510TUNE JBL" from the second device's Bluetooth settings.
Once connected to the second device, turn Bluetooth back on for the first device to connect simultaneously.
When a phone call comes in, the headphones will prioritize the call.
If one device goes out of Bluetooth range or powers off, the other device will continue to play. You may need to manually reconnect the remaining device.
To disconnect from multi-point connection, select "Forget this device" on your Bluetooth devices.

Charging

Connect the USB charging cable to the headphones and a power source. The LED indicator will turn red while charging and turn off when fully charged.

LED Behaviors

Connecting BT: Flashing blue
Connected BT: Solid blue
Low battery: Flashing red
Charging: Solid red
Fully charged: LED turns off
Power On/Off: Flashing blue briefly

Technical Specifications

Model: BT510 TUNE
Driver Size: 32 mm Dynamic Driver
Power Supply: 5V 1A
Weight: 160g (0.35 lbs)
Headset Battery Type: Lithium-ion battery (3.7V, 450mAh)
Charging Time: 2 hours
Music Playtime with BT on: Up to 40 hours
Frequency Response: 20 Hz – 20 kHz
Impedance: 32 ohm
Sensitivity: 103.5 dB SPL@1kHz
Maximum SPL: 95 dB
Microphone Sensitivity: -29 dBV/Pa@1kHz
Bluetooth Version: 5.0
Bluetooth Profile Version: HFP 1.7V, AVRCP 1.6, A2DP 1.3
Bluetooth Transmitter Frequency Range: 2.4 GHz – 2.4835 GHz
Bluetooth Transmitted Power: <8 dBm
Bluetooth Transmitted Modulation: GFSK, π/4DQPSK, 8DPSK
Maximum Operation Temperature: 45° C

Prolonging Battery Life

To prolong the battery life, charge the battery fully at least once every 3 months. Battery life varies depending on usage and settings.

	JBL Tune 510BT Quick Start Guide A concise guide to setting up and using your JBL Tune 510BT headphones, covering pairing, button commands, multi-point connection, charging, and LED behavior.
	JBL Tune 510BT Quick Start Guide A concise guide to setting up and using your JBL Tune 510BT headphones, covering unboxing, pairing, button commands, multi-point connection, charging, LED indicators, and technical specifications.
	JBL Tune 510BT Quick Start Guide A quick start guide for the JBL Tune 510BT headphones, covering setup, pairing, button commands, multi-point connection, charging, and technical specifications.
	JBL TUNE510BT Quick Start Guide A quick start guide for the JBL TUNE510BT headphones, covering setup, pairing, button commands, multi-point connection, charging, and LED behaviors.
	JBL TUNE510BT Quick Start Guide A concise guide to setting up and using your JBL TUNE510BT headphones, covering power, pairing, button commands, multi-point connection, charging, and LED indicators.
	JBL TUNE510BT Quick Start Guide A quick start guide for the JBL TUNE510BT headphones, covering what's in the box, power on and connect, manual pairing, button commands, multi-point connection, charging, LED behaviors, and technical specifications.
	JBL TUNE510BT Quick Start Guide A quick start guide for the JBL TUNE510BT headphones, covering what's in the box, powering on, pairing, button commands, multi-point connection, charging, LED behaviors, and technical specifications.
	JBL TUNE510BT Quick Start Guide A quick start guide for the JBL TUNE510BT headphones, covering setup, pairing, button commands, multi-point connection, charging, LED behaviors, and technical specifications.