ASSEMBLY INSTRUCTION
SKU CODE: (WF199452-WF199453)
This set is included 2 boxes if don't receive full 2 boxes please contact our customer service team.
Contact Information
If you have any questions, please feel free to contact us.
Email: hdteam@aminalife.com
SAFETY WARNINGS
- Follow the information on the warning label appearing on the upper bunk end structure and on the carton... Do not remove warning label from bed.
- Always use the recommended size mattress or mattress support, or both, to help prevent the likelihood of entrapment or falls.
- Surface of mattress must be at least 5 inches below the upper edge of guard rails.
- Do not allow children under 6 years to use the upper bunk.
- Prohibit more than one person on upper bunk.
- Periodically check and ensure that the guardrail, ladder, and other components are in their proper position, free from damage, and that all connectors are tight.
- Do not allow horseplay on or under the bed and prohibit jumping on the bed.
- Always use the ladder for entering and leaving upper bunk.
- Do not use substitute part. Contact the manufacturer or dealer for replacement part.
- Use of night light may provide added safety precaution for a child using the upper bunk.
- If the bunk bed will be placed next to a wall, the guardrail that runs the full length of the bed should be placed against the wall to prevent entrapment between the bed and the wall.
- Always use guardrail on both long sides of the upper bunk.
- The use of water or sleep flotation mattresses is prohibited.
- Keep these instruction for future reference.
- Strangulation Hazard - Never attach or hang items to any part of the bunk bed that are not designed for use with the bed, for example, but not limited to hooks, belts and jump ropes.
- Trundle: Only use for mattress 6 inch.
Product Overview
The main illustration shows a daybed frame with a headboard and footboard, featuring a slatted mattress support. Below it, a separate trundle unit is depicted, also with a slatted base, designed to fit underneath the main bed.
Part List (WF199452)
| Part ID | Description | Quantity |
|---|---|---|
| A1 | HeadBoard | 1pcs |
| A2 | FootBoard | 1pcs |
Part List (WF199453)
| Part ID | Description | Quantity |
|---|---|---|
| B | SideRails | 2pcs |
| C | Back Frame | 1pcs |
| D | Trundle-Front panel | 1pcs |
| E | Trundle-Back panel | 1pcs |
| F | Slats | 20pcs |
Hardware List
| Hardware ID | Description | Quantity |
|---|---|---|
| 1 | Plastic Feet (Ø60x50) | 4pcs |
| 2 | Ø1/4" x 30 mm Hex-Head bolts | 8pcs |
| 3 | Ø1/4" x 40 mm Hex-Head bolts | 4pcs |
| 4 | M4 x 30 mm Wood Screws | 40pcs |
| 5 | M4 x 15 mm Wood Screws | 21pcs |
| 6 | Wheels | 6pcs |
| 7 | Steel Bracket | 3pcs |
| 8 | Allen Key | 1pc |
Assembly Tools Required (Not Included): Screwdriver
Assembly Steps
STEP 1: Assemble Headboard and Footboard
Attach Plastic Feet (1) to the bottom of the Headboard (A1) and Footboard (A2). The diagram shows a cylindrical foot being inserted into a pre-drilled hole and rotated to secure.
STEP 2: Attach Side Rails
Connect the Side Rails (B) to the Headboard (A1) and Footboard (A2). Use Hex-Head bolts (2) and the Allen Key (8) for this step. The diagram shows the side rails being aligned with the headboard and footboard and bolts being inserted and tightened.
STEP 3: Attach Back Frame
Attach the Back Frame (C) to the assembled bed structure. Use Hex-Head bolts (3) for this connection. Arrows in the diagram indicate the points where the frame is attached and bolts are inserted.
STEP 4: Install Main Bed Slats
Secure the Slats (F) to the Side Rails (B) of the main bed frame. Use Wood Screws (4) for this. A detail view shows a screw being driven through a slat into the side rail.
STEP 5-1: Prepare Trundle Frame (Wheels)
Attach Wheels (6) to the trundle frame components. The diagram shows wheels being attached to a long frame piece (labeled F, likely a trundle side rail) using Wood Screws (5). The text mentions "Slats F(x3)", which may refer to specific trundle slats or a quantity of trundle frame pieces.
STEP 5-2: Assemble Trundle
Assemble the trundle unit. First, attach Slats (F) to the Trundle Front Panel (D) and Trundle Back Panel (E) using Wood Screws (4). Then, attach Steel Brackets (7) to the Trundle Front Panel (D) and Slats (F) using Wood Screws (5). Detail views illustrate the placement of screws and brackets.
STEP 12: Insert Trundle
Complete the assembly by sliding the assembled Under Bed Trundle into its position beneath the main bed. Arrows in the diagram indicate the direction of insertion.
Customer Service
PLEASE DO NOT RETURN PRODUCT TO THE STORE. If you have any problem or concerns, please feel free to contact our customer service department. We will reply you as soon as possible.
E-Mail: wmcsr@comptree.net
Tel: 626-912-8886 Ext.100
Document version: 01/10
