Assembly Instruction / Instructions de Montage
SKU CODE: (N708P268097-N708P268098)
If you have any questions, please feel free to contact us. Email: hdteam@aminalife.com
! SAFETY WARNINGS !
- This bed is designed for use Queen Mattress 80 inch Long and 60 inch Wide.
- Always use the recommended size mattresses or mattress supports, or both, to help prevent the likelihood of entrapment or falls.
- Do not allow horseplay on or under the bed and prohibit jumping on the bed.
- Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
- Keep these instructions for future reference.
Page 01/13
Part List (N708P268097)
- A1: Leg (HB Font) 2pcs / Jambe (police HB) 2 pièces
- A2: FB Frames 1pc / Cadres FB 1 pièce
- A3: HB Frames 1pc / Cadres HB 1 pièce
- C: Support Leg 3pcs / Jambe de soutien 3 pièces
- F: Slats 7pcs / Lattes 7 pièces
- F1: Slats Mount Leg 3pcs / Pied de montage pour lattes 3 pièces
- H: Drawers - Bottom Panel 2pcs / Tiroirs - Panneau inférieur 2pièces
Page 03/13
Hardware List (N708P268097)
- 1: Plastic Feet (Ø50x40) 2 pcs / Pieds en plastique(Ø50x40) 2 pièces
- 2: Wheels 12 pcs / Roues 12 pièces
- 3: M4 x 15 mm Wood Screws 32 pcs / M4 x 15 mm Vis à bois 32 pièces
- 4: M4 x 30 mm Wood Screws 56 pcs / M4 x 30 mm Vis à bois 56 pièces
- 5: Ø1/4"x25mm Hex-Head bolts 8 pcs / Ø1/4"x25mmBoulons à tête hexagonale 8pièces
- 6: Ø1/4"x40 mm Hex-Head bolts 6 pcs / Ø1/4"x40mmBoulons à tête hexagonale 6pièces
- 7: Allen Key 1pc / Clé Allen 1 pièce
- 8: Steel Bracket 3 pcs / Support en acier 3 pièces
- 9: Ø1/4" x35 mm Hex-Head bolts 3 pcs / Ø1/4"x35mmBoulons à tête hexagonale 3pièces
- 10: M4 x 12 mm Wood Screws 28 pcs / M4 x 12 mm Vis à bois 28 pièces
- 11: Steel Bracket 4 pcs / Support en acier 4 pièces
- 12: Ø6 x 30 mm Wood dowel 8 pcs / Ø6 x 30 mm Cheville en bois 8 pièces
Assembly Tools Required (Not Included)
Outils d'assemblage requis (Non inclus)
Page 04/13
Part List (N708P268098)
- B: Side Rails-2pcs / Rails latéraux-2 pièces
- C: Drawers - Back Panel 2pcs / Tiroirs - Panneau arrière 2pièces
- D: Drawers - Side Panels 4pcs / Tiroirs-Panneaux latéraux 4pièces
- E: Drawers - Font Panels 2pcs / Tiroirs - Panneaux de police 2pièces
- F2: Slats 10pcs / Lattes 10pièces
- G: Drawers-Support Bottom 2pcs / Tiroirs-Support Bottom 2pièces
- H: Drawers - Bottom Panel 2pcs / Tiroirs - Panneau inférieur 2pièces
- I: Drawers - Front Panel 2pcs / Tiroirs - Panneau avant 2pièces
- K: Front Trundle Panel 1pc / Panneau gigogne avant 1pièce
- L: Back Trundle panel 1pc / Panneau gigogne arrière 1pièce
Page 05/13
STEP 1.1
Assembly Plastic Feet #1 With A2 FB Frames
Attach Plastic Feet (#1) to the A2 FB Frames using the provided hardware.
Page 06/13
STEP 1.2
Assembly HB Frames (A3) and Side Rails (B) to the A2 FB Frames.
Attach the HB Frames (A3) and Side Rails (B) to the A2 FB Frames using Hex-Head bolts (#6).
Page 06/13
STEP 2
Attach the Side Rails (B) to the HB Frames (A3) and A2 FB Frames.
Secure the Side Rails (B) to the HB Frames (A3) and A2 FB Frames using Hex-Head bolts (#5).
Page 07/13
STEP 3.1
Attach Support Legs (C) to the Slats (F) using Hex-Head bolts (#9).
Repeat this step three times.
Page 08/13
STEP 3.2
Install the assembled slats onto the bed frame.
Place the slats (F) onto the bed frame and secure them using Wood Screws (#4). Ensure the slats are spaced approximately 152mm apart.
Page 08/13
STEP 4.1
Assemble the drawer components.
Attach the drawer side panels (D) and drawer bottom panel (H) to the drawer front panel (E) using Wood Screws (#3), Wood dowels (#12), and Steel Brackets (#11).
Repeat this step twice.
Page 09/13
STEP 4.2
Attach the drawer side panels (D) to the drawer bottom panel (H).
Repeat this step twice.
Page 09/13
STEP 5.1
Assemble the drawer structure.
Attach the drawer back panel (C) to the drawer side panels (D) using Wood Screws (#10).
Repeat this step twice.
Page 10/13
STEP 5.2
Insert the drawer bottom panel (H) into the assembled drawer frame.
Repeat this step twice.
Page 10/13
STEP 6.1
Attach the drawer front panel (E) to the assembled drawer.
Secure the drawer front panel (E) to the drawer assembly using Wood Screws (#4).
Repeat this step twice.
Page 11/13
STEP 6.2
Attach the wheels (2) and plastic feet (10) to the bottom of the drawer assembly.
Secure the wheels (2) and plastic feet (10) using the provided hardware.
Repeat this step twice.
Page 11/13
STEP 7.1
Attach the support brackets (2) to the slats (F2).
Secure the support brackets (2) to the slats (F2) using Wood Screws (#3).
Repeat this step twice.
Page 12/13
STEP 7.2
Attach the assembled slats to the bed frame.
Secure the slats (F2) to the bed frame using Wood Screws (#3), Hex-Head bolts (#8), and Wood Screws (#4). Ensure the slats are spaced approximately 162mm apart.
Page 12/13
STEP 8
Insert the drawers into the bed frame.
Slide the assembled drawers into the designated slots in the bed frame.
Page 13/13
FINISH
The bed assembly is now complete.
Page 13/13
