TONSTAD
Assembly Instructions
Safety Warnings
⚠️ WARNING
Children have died from furniture tipover. To reduce the risk of furniture tipover:
- ALWAYS install the anti-tip device provided.
- NEVER allow children to stand, climb, or hang on any drawers, doors, or shelves.
- ALWAYS secure your television with an anchor device.
Read and follow each step of the instruction carefully.
Tools Required
The following tools are typically needed for assembly:
- Phillips head screwdriver
- Flathead screwdriver
- Hammer
- Drill
Parts List
Please verify you have all parts before starting assembly:
- 6x Screw (Part 100211)
- 8x Dowel (Part 109504)
- 4x Handle screw (Part 146114)
- 9x Cam lock screw (Part 151707)
- 9x Cam lock (Part 151708)
- 5x Bracket (Part 10093081)
- 5x Bracket (Part 10093082)
- 8x Sliding door runner, part A (Part 10094664)
- 16x Sliding door runner, part B (Part 10094662)
- 2x Shelf support (Part 10092248)
- 2x Shelf support (Part 10092282)
- 4x Sliding door track, upper (Part 10094638)
- 4x Sliding door track, lower (Part 10094655)
- 1x Handle (Part 10083446)
- 1x Handle (Part 10091646)
- 5x Adjustable foot (Part 159991)
- 1x Assembly tool (Part 190459)
- 1x Assembly tool (Part 153549)
- 6x Screw (Part 118331)
- 8x Bolt (Part 101350)
- 5x Screw (Part 102553)
- 6x Screw (Part 113434)
- 2x Wall bracket screw (Part 147968)
- 2x Wall bracket screw (Part 158469)
- 2x Wall anchor (Part 121714)
- 2x Wall bracket (Part 150689)
- 2x Wall bracket (Part 327495)
- 2x Wall bracket (Part 126916)
- 2x Wall bracket (Part 150688)
Assembly Steps
Step 1
Attach the side panels to the base. Use 6x screws (100211) and 8x dowels (109504).
Step 2
Attach the back panel to the assembled base and side panels.
Step 3
Attach the second side panel to the base and back panel.
Step 4
With assistance from another person, lift the main frame of the unit.
Step 5
Install internal dividers and supports. Use 6x screws (100211) and 10x dowels (109504).
Step 6
Slide the back panel into the grooves on the side and base panels.
Step 7
Secure the back panel using 9x screws (151707).
Step 8
Attach the mounting brackets (10093081, 10093082) to the inside of the frame using 5x screws (10093081).
Step 9
Prepare the sliding door tracks. Attach runners (10094664, 10094656, 10094681) to the tracks.
Step 10
Attach the lower sliding door tracks (10094655) to the unit using 4x screws (10094664).
Step 11
Attach the upper sliding door tracks (10094638) using 4x screws (10094664).
Step 12
Attach the upper sliding door tracks (10094638) using 4x screws (10094662).
Step 13
Secure the lower sliding door tracks (10094655) with 4x screws (109504).
Step 14
Attach the adjustable feet (159991) to the base of the unit using 8x bolts (101350).
Step 15
Install shelf supports (10092248, 10092282) into the pre-drilled holes using 6x screws (118331).
Step 16
Assemble the components for the sliding doors.
Step 17
Attach components to the sliding door frame using 2x screws (113434).
Step 18
Insert dowels into the sliding door frame components.
Step 19
Attach brackets to the sliding door frame using 4x screws (113434).
Step 20
Place the main assembled frame onto the base with attached feet.
Step 21
Attach sliding door runners (102553) to the doors using 5x screws (151708).
Step 22
Attach sliding door runners (102553) to the doors using 5x screws (151707).
Step 23
Attach sliding door runners (102553) to the doors using 5x screws (151708).
Step 24
Attach handles (10083446, 10091646) to the doors using 5x screws (159991).
Step 25
Attach wall mounting hardware to the back of the unit using 2x screws (150688).
Step 26
Attach wall mounting hardware to the back of the unit using 2x screws (150689).
Step 27
Insert the wall mounting hardware into the wall at the desired height.
Step 28
Secure the unit to the wall using the provided wall mounting hardware and screws (190459). Ensure it is firmly attached.
Step 29
Insert the sliding doors into the upper tracks, guiding them carefully.
Step 30
Slide the doors down into the lower tracks.
Step 31
Attach the sliding door guides to the bottom of the doors.
Step 32
Secure the sliding door guides to the unit using 2x screws (126916) and 2x cam locks (133194, 126918). Ensure a 'click' sound is heard.
Step 33
Attach shelf supports (10092248, 10092282) to the internal dividers using screws. (Refer to diagrams for specific screw type if not explicitly numbered here).
Step 34
Place the shelves onto the installed shelf supports.
Step 35
Attach handles to the sliding doors using 2x screws (146114).
Step 36
Attach sliding door mechanisms to the unit using 4x screws (10094656).
Step 37
Attach sliding door mechanisms to the unit using 4x screws (10094681).
Step 38
Attach sliding door mechanisms to the unit using 4x screws (10094681).
Step 39
Insert the sliding doors into the upper track and then guide them into the lower track.
Step 40
Secure the sliding door mechanisms by pushing them until they 'click' into place.
Step 41
Insert the sliding doors into the upper track.
Step 42
Secure the sliding door mechanisms by pushing them until they 'click' into place.
Wall Mounting Guidance
The screw(s) and plug(s) supplied can be used with most solid (A) and hollow (B) walls. For solid wood (C) use the screw(s) without plug(s). If you are uncertain, seek professional advice.
Type A (Solid Walls)
Drill a hole with Ø 8 mm (5/16"). Use a screw of approximately 70 mm (2 3/4").
Type B (Hollow Walls)
Drill a hole with Ø 8 mm (5/16"). Use a screw of approximately 30 mm (1 1/4").
Type C (Solid Wood)
Drill a hole with Ø 3 mm (1/8"). Use a screw of approximately 30 mm (1 1/4") without a wall plug.
Final Adjustments
The doors can be adjusted for proper alignment. Use the adjustment screws (4x) located on the sliding door mechanisms to fine-tune the door position (Min/Max adjustment).
