VITTSJÖ Shelving Unit Assembly Instructions
Product by IKEA
Important Safety Information
⚠ WARNING: Furniture tip-over hazard!
Children have died from furniture tip-over. To reduce the risk of furniture tip-over:
- ALWAYS install the anti-tip device provided. [Install anti-tip device]
- NEVER place a TV on this product. [No TV]
- NEVER allow children to stand, climb, or hang on any drawers, doors, or shelves. [No climbing/standing]
- NEVER open more than one drawer at a time.
- Place heaviest items in the lowest drawers.
Read and follow each step of the instruction carefully.
Parts Included
| Quantity | Description / Part Number |
|---|---|
| 4x | Screw (122158 / 143131) |
| 26x | Screw (114676 / 116654) |
| 8x | Screw (123723 / 124694) |
| 6x | Shelf Support (123741 / 107091) |
Note: Quantities listed here are from the initial parts diagram. Actual usage in assembly steps may vary.
Assembly Steps
Follow these steps to assemble your VITTSJÖ shelving unit.
Step 1
Assemble the base frame by connecting the side rails and crossbars.
Step 2
Insert vertical supports into the base frame.
Step 3
Attach side frame components to the vertical supports.
Step 4
Add another vertical support.
Step 5
Add another vertical support.
Step 6
Add the remaining vertical supports.
Step 7
Attach the top frame components.
Step 8
Secure the horizontal crossbars between the vertical supports.
Step 9
Attach corner braces for stability.
Step 10
Attach the brackets that will hold the shelves.
Step 11
Attach the outer side frame elements.
Step 12
Attach the bottom shelf supports.
Step 13
Secure the unit to the wall using the provided anti-tip hardware. This is a critical safety step.
Step 14
Insert the glass shelves onto the supports.
