VITTSJÖ Shelving Unit

Safety Warnings

General Safety

Children have died from furniture tipover. To reduce the risk of furniture tipover:

• ALWAYS install anti-tip device provided. ⚠️
• NEVER put a TV on this product. ??
• NEVER allow children to stand, climb, or hang on any drawers, doors, or shelves. ??
• NEVER open more than one drawer at a time.
• Place heaviest items in the lowest drawers.

Assembly Instructions

Read and follow each step of the instruction carefully.

Assembly Steps

Step 1

Attach two brackets (parts 150985/150987) to the base frame. Each bracket is secured with two screws (parts 122158/143131). Tighten with a screwdriver. ???

Step 2

Insert two vertical support poles into the designated slots on the base frame. Ensure they are seated correctly. ➡️

Step 3

Secure the two vertical support poles to the base frame using one screw (part 122158/143131) and one washer (part 107615/107616) for each pole. Tighten with a screwdriver. ??

Step 4

Insert two more vertical support poles into the designated slots on the base frame. Ensure they are seated correctly. ➡️

Step 5

Secure the two vertical support poles to the base frame using one screw (part 122158/143131) and one washer (part 107615/107616) for each pole. Tighten with a screwdriver. ??

Step 6

Insert five vertical support poles into the designated slots on the base frame. Ensure they are seated correctly. ➡️

Step 7

Attach two brackets (parts 150982/150984) to the top frame. Each bracket is secured with two screws (parts 122158/143131). Tighten with a screwdriver. ???

Step 8

Carefully place the assembled top frame onto the vertical support poles. Ensure the poles align with the corresponding holes in the top frame. ⬆️

Step 9

Secure the top frame to the vertical support poles using eight screws (parts 107615/107616) and eight washers (parts 123723/124694). Tighten with a screwdriver. ???

Step 10

Attach two brackets (parts 150982/150984) to the side frame structure. Each bracket is secured with two screws (parts 122158/143131). Tighten with a screwdriver. ???

Step 11

Attach four shelves to the vertical support poles. Each shelf is secured with one screw (part 107615/107616) and one bracket (part 122158/143131). Tighten with a screwdriver. ??

Step 12

Attach one bracket (part 150982/150984) to the frame using one screw (part 107615/107616). Tighten with a screwdriver. ??

Step 13

Attach three brackets (parts 150985/150987) to the frame. Each bracket is secured with three screws (parts 107615/107616). Tighten with a screwdriver. ???

Step 14

Attach four shelves to the vertical support poles. Each shelf is secured with one screw (part 107615/107616) and one bracket (part 150985/150987). Tighten with a screwdriver. ??

Step 15

Attach one bracket (part 150982/150984) to the frame using one screw (part 107615/107616). Tighten with a screwdriver. ??

Step 16

Attach three shelves to the vertical support poles. Each shelf is secured with one screw (part 107615/107616) and one bracket (part 150985/150987). Tighten with a screwdriver. ??

Step 17

Attach two brackets (parts 150985/150987) to the frame. Each bracket is secured with two screws (parts 107615/107616). Tighten with a screwdriver. ???

Step 18

Attach six shelves to the frame. Each shelf is secured with one screw (part 123723/124694). Tighten with a screwdriver. ???

Step 19

Attach side panels to the frame. Each panel is secured with six screws (parts 107615/107616) and six brackets (parts 123723/124694). Tighten with a screwdriver. ??

Step 20

Attach six shelves to the frame. Each shelf is secured with one screw (part 123723/124694). Tighten with a screwdriver. ???

Step 21

Secure the unit to the wall using the provided anti-tip hardware (2x). Follow wall-specific instructions for secure mounting. ⚠️➡️

Step 22

Insert eighteen shelf supports (parts 123741/107091) into the pre-drilled holes on the vertical poles at the desired shelf heights. ➡️