ALLSTAND L Shaped Computer Desk - Assembly Instructions
Brand: ALLSTAND
Product Overview & Important Notes
This document provides detailed assembly instructions for the ALLSTAND L Shaped Computer Desk. Please read all instructions carefully before beginning assembly.
Note: A more detailed installation video is available on the product detail page on Amazon.
Important Safety and Assembly Notes
- Some parts of the computer desk have sharp edges, so please be attentive to avoid scratches when installing.
- Due to the small size of the hardware, please put them in a safe position when installing them to avoid accidental loss or injury.
- In order to ensure a smooth installation experience, please follow the steps in this manual and carefully distinguish screws and steel strips. Having a helper will make the installation process easier.
- ALLSTAND offers customers a free lifetime warranty. For any product issues, after-sales service, or other relevant problems, please contact ALLSTAND via the email provided on the cover.
Assembly Parts List
Identify all parts before starting assembly. Quantities are listed, with spares indicated by "+".
| No. | Part Name/Description | Quantity |
|---|---|---|
| 1 | Vertical Frame | 2 PC |
| 2 | Desk Leg Frame | 2 PC |
| 3 | Long Connecting Bar | 1 PCS |
| 4 | Upper Shelf Frame (Left) | 1 PC |
| 5 | Upper Shelf Frame (Right) | 1 PC |
| 6 | Back Support Bar (Long) | 1 PC |
| 7 | Back Support Bar (Medium) | 1 PC |
| 8 | Back Support Bar (Short) | 1 PC |
| 9 | Back Support Bar (Short) | 1 PC |
| 10 | Back Support Bar (Short) | 1 PC |
| 11 | Diagonal Support Bar | 2 PCS |
| 12 | Side Shelf Frame (Left) | 1 PC |
| 13 | Side Shelf Frame (Right) | 1 PC |
| 14 | Side Shelf Frame (Short) | 2 PCS |
| 15 | Side Shelf Frame (Long) | 4 PCS |
| 16 | Desk Surface (Main) | 1 PCS |
| 17 | Desk Surface (Extension) | 1 PC |
| 18 | Upper Shelf Panel | 2 PCS |
| 19 | Monitor Stand Base | 2 PCS |
| 20 | Light Strip | 1 PCS |
| 21 | Recessed Power Strip | 1 PC |
| 22 | Monitor Stand Arm | 1 PC |
| 23 | Monitor Stand Clamp | 2 PCS |
| A | Screw (M4, 6*22mm) | 23+2 PCS |
| B | Screw (M4, 6*25mm) | 4 PCS |
| C | Screw (M4, 6*30mm) | 26+2 PCS |
| D | Screw (M4, 4*10mm) | 8+1 PCS |
| E | Screw (M4, Ø5*38mm) | 12+1 PCS |
| F | Allen Wrench | 1 PC/EACH |
| G | Screw (M3, Ø5*38mm) | 2 PCS |
| H | Light Strip Clip | 6 SETS |
| I | Power Strip Screw | 2 PCS |
| J | Clamp Screw | 2 PCS |
| K | Clamp Nut | 2 PCS |
| L | Small Screw | 1 PCS |
Assembly Steps
Step 1: Assembly steps of the light strip
Parts: 4 (or 5), 20, H (x6), L (x1)
Diagram shows the light strip (20) being attached to the underside of either shelf panel (4) or shelf panel (5). The light strip has an adhesive backing that needs to be removed before application.
There are two possible positions for attaching the light strip:
- On the bottom of shelf panel (4).
- On the bottom of shelf panel (5).
Use hardware H (6 sets) and L (1 piece) to secure the light strip.
[Note: Diagram labels include "PARTE FRONTAL", "FRONT", "AVANT" indicating front orientation.]
Step 2: Assembly steps of the recessed power strip
Parts: 16, 21, I (x2), L (x1)
Diagram shows the recessed power strip (21) being attached to the underside of the main desk surface (16). Use hardware I (2 pieces) and L (1 piece) for attachment.
Step 3: Assembly steps of the monitor stand
Parts: 22, 23 (x2), A (x4), J (x2), K (x2), F (x1)
Diagram shows the monitor stand arm (22) and clamp components (23). First, attach the clamp parts (23) to the monitor stand arm (22) using hardware A (4 pieces).
Then, attach the clamp assembly to the desk edge using hardware J (2 pieces) and F (1 piece, Allen wrench). A close-up shows the clamp mechanism.
[Warning: Do not fully tighten J.]
Step 4: Assembly steps of the computer desk frame
Parts: 1 (x2), 3, C (x2), F (x1)
Diagram shows two vertical frames (1) being connected by a long connecting bar (3) using hardware C (2 pieces) and F (1 piece, Allen wrench).
[Warning: Do not fully tighten screws until the end of step 19.]
Step 5: Connecting desk leg frames
Parts: 2 (x2), 5, A (x3), E (x4), F (x1)
Diagram shows the desk leg frames (2) being attached to the upper shelf frame (5). Use hardware A (3 pieces) to connect part (5) through corresponding holes. Then, use hardware E (4 pieces) to connect the desk leg frames (2) to part (5).
[Warning: Do not fully tighten screws until the end of step 19.]
Step 6: Installing desk leg frames
Parts: 2, 4, E (x8), F (x1)
Diagram shows hardware E (8 pieces) being used to install the desk leg frames (2) and the upper shelf frame (4) together. The Allen wrench F is used.
[Warning: Do not fully tighten screws until the end of step 19.]
Step 7: Attaching the main desk surface
Parts: 16, C (x4), F (x1)
Diagram shows the main desk surface (16) being attached to the assembled frame from Step 6. Use hardware C (4 pieces) and the Allen wrench F.
Instruction: "Fully tighten C screws using wrench F."
Step 8: Assembling back support bars
Parts: 6, 7, 8, 9, 10, 11 (x2), C (x6), D (x4), F (x1), L (x1)
Diagram shows the back support bars (6, 7, 8, 9, 10) being connected to the vertical frames. Use hardware C (6 pieces) for most connections and hardware D (4 pieces) for attaching diagonal support bars (11).
Tip: There are two adjacent threaded holes, choose to insert the one above for the back support bars.
[Note: Diagram indicates "Threading facing outside" for some parts.]
[Warning: Do not fully tighten screws until the end of step 19.]
Step 9: Assembling side shelf frames
Parts: 14 (x2), 15 (x4), C (x8), F (x1)
Diagram shows the side shelf frames (14, 15) being connected to the main desk structure. Use hardware C (8 pieces) and the Allen wrench F.
Tip: There are two adjacent threaded holes, choose to insert the one below for the side shelf frames.
[Note: Diagram indicates "Threading facing outside" for some parts.]
[Warning: Do not fully tighten screws until the end of step 19.]
Step 10: Attaching upper shelf panels & choosing configuration
Parts: 18 (x2), A (x4), F (x1)
Diagram shows the upper shelf panels (18) being attached to the frame structure using hardware A (4 pieces) and Allen wrench F.
Instruction: "Please decide upper shelf height of the 18 parts at this time."
[Warning: Do not fully tighten screws until the end of step 19.]
STOP! SEE BELOW BEFORE PROCEEDING
Select your desired configuration and proceed to the corresponding steps:
- Option 1: Please continue to step 11, 12 & 19.
- Option 2: Please continue to step 13, 14 & 19.
- Option 3: Please continue to step 15, 16 & 19.
- Option 4: Please continue to step 17, 18 & 19.
Visual representations of Option 1, Option 2, Option 3, and Option 4 are shown below.
[Visuals show different arrangements of the desk components, primarily affecting the placement and extension of the side shelving units.]
Step 11: Option 1 assembly
Parts: 12, 13 (x2), C (x6), F (x1)
Diagram shows the left side shelf frame (12) and right side shelf frames (13) being connected to the main desk structure using hardware C (6 pieces) and Allen wrench F.
[Warning: Do not fully tighten screws until the end of step 19.]
Step 12: Option 1 assembly (Upper Part)
Parts: A (x12), B (x4), F (x1)
Diagram shows the upper part of the desk (including shelves) being attached to the structure assembled in Step 11. Use hardware A (12 pieces) and B (4 pieces) with Allen wrench F.
[Warning: Do not fully tighten screws until the end of step 19.]
Step 13: Option 2 assembly
Parts: 12, 13 (x2), C (x6), F (x1)
Diagram shows the left side shelf frame (12) and right side shelf frames (13) being connected to the main desk structure using hardware C (6 pieces) and Allen wrench F. This configuration appears similar to Option 1 in terms of frame connection.
[Warning: Do not fully tighten screws until the end of step 19.]
Step 14: Option 2 assembly (Upper Part)
Parts: A (x12), B (x4), F (x1)
Diagram shows the upper part of the desk being attached to the structure assembled in Step 13. Use hardware A (12 pieces) and B (4 pieces) with Allen wrench F.
[Warning: Do not fully tighten screws until the end of step 19.]
Step 15: Option 3 assembly
Parts: 12, 13 (x2), C (x6), F (x1)
Diagram shows the left side shelf frame (12) and right side shelf frames (13) being connected to the main desk structure using hardware C (6 pieces) and Allen wrench F. This configuration appears to use the longer side shelf frames.
[Warning: Do not fully tighten screws until the end of step 19.]
Step 16: Option 3 assembly (Upper Part)
Parts: A (x12), B (x4), F (x1)
Diagram shows the upper part of the desk being attached to the structure assembled in Step 15. Use hardware A (12 pieces) and B (4 pieces) with Allen wrench F.
[Warning: Do not fully tighten screws until the end of step 19.]
Step 17: Option 4 assembly
Parts: 12, 13 (x2), C (x6), F (x1)
Diagram shows the left side shelf frame (12) and right side shelf frames (13) being connected to the main desk structure using hardware C (6 pieces) and Allen wrench F. This configuration also appears to use the longer side shelf frames.
[Warning: Do not fully tighten screws until the end of step 19.]
Step 18: Option 4 assembly (Upper Part)
Parts: A (x12), B (x4), F (x1)
Diagram shows the upper part of the desk being attached to the structure assembled in Step 17. Use hardware A (12 pieces) and B (4 pieces) with Allen wrench F.
[Warning: Do not fully tighten screws until the end of step 19.]
Step 19: Final Assembly & Tightening (All Options)
Parts: 19 (x2), D (x4), G (x2), J (x1), L (x1)
Diagram shows the final assembly stage. Use hardware D (4 pieces) to connect the monitor stand bases (19) to each side of the table. Then, attach the monitor stand assembly (from Step 3) to the table using hardware J.
Instruction: "Fully tighten all screws at the end of this step."
Installation completed.
Assembly Options Visuals
The following images illustrate the four possible configurations for assembling the L Shaped Computer Desk, primarily differing in the arrangement and extension of the side shelving units.
Option 1
[Diagram shows the L-shaped desk with the shorter shelving unit on the right side.]
Option 2
[Diagram shows the L-shaped desk with the longer shelving unit on the right side, extending further.]
Option 3
[Diagram shows the L-shaped desk with the longer shelving unit on the left side, extending further.]
Option 4
[Diagram shows the L-shaped desk with the longer shelving unit on the left side and the shorter shelving unit on the right side.]
