ALLSTAND Shoes Cabinet Instruction Manual

Decomposition of Components

This section provides an exploded view of all parts and hardware required for assembly. The components are numbered 1 through 12, and the hardware is labeled A through M.

Component List

• Part 1: Side Panel (x1)
• Part 2: Side Panel (x1)
• Part 3: Top/Bottom Panel (x1)
• Part 4: Top/Bottom Panel (x1)
• Part 5: Back Panel (x1)
• Part 6: Middle Shelf Support (x1)
• Part 7: Back Panel Insert (x1)
• Part 8: Door (x2)
• Part 9: Adjustable Shelf (x3)
• Part 10: Base Frame (x2)
• Part 11: Base Shelf Support (x1)
• Part 12: Base Shelf (x1)

Hardware List

• Screw A (M6*28): x8
• Screw B (M5*12): x8
• Screw C (M5*40): x35
• Screw D (M6*40): x4
• Screw E (M6*40): x8
• Screw F (M6*28): x6
• Cam Lock G: x4
• Cam Dowel H: x2
• Shelf Pin I: x12
• Hinge J: x2
• Rod K: x1
• Foot L: x4
• Wall Anchor M: x8

Installation Tools

• Screwdriver (3#)
• Screwdriver (4#)
• Hammer ?
• Drill ?

Assembly Instructions

1. Step 1: Attach side panels (1 and 2) to the bottom panel (3) using screws (A). Ensure correct orientation of panels.
2. Step 2: Attach side panel (1) to the bottom panel (3) using screws (B). Ensure the groove on panel 3 faces downwards.
3. Step 3: Attach side panel (4) to side panel (1) using screws (B). Ensure the three holes on panel 4 face downwards.
4. Step 4: Attach side panel (2) to side panel (1) using screws (B).
5. Step 5: Slide the middle shelf support (6) into the pre-drilled holes on the side panels (1 and 2).
6. Step 6: Secure the middle shelf support (6) using screws (C).
7. Step 7: Insert the back panel insert (7) into the grooves of the side panels using rod (K).
8. Step 8: Attach the back panel (5) to the assembly using screws (D).
9. Step 9: Assemble the base frames (10) using screws (L). Two base frames are assembled.
10. Step 10: Connect the base frames (10) with the base shelf support (11) and the base shelf (12) using screws (E).
11. Step 11: Attach the bottom part of the cabinet structure to the assembled base using screws (F).
12. Step 12: Insert the adjustable shelves (9) into the main cabinet structure. The shelves can be positioned flat or tilted as needed, secured with shelf pins (I).
13. Step 13: Attach the doors (8) to the side panels using cam locks (G), cam dowels (H), and screws (C).
14. Step 14: Mount the doors (8) to the cabinet. Note that there are only two primary holes for each door hinge on panels 1 and 2. Secure these first, then adjust door position, and finally reinforce with remaining holes using screws (C).
15. Step 15: Adjust the door position (height, depth, length) by manipulating the screws on the hinges (J). Detailed diagrams show how to adjust height, depth, and length.
16. Step 16: Reinforce the cabinet structure by attaching parts C and M to the back or sides as indicated.
17. Step 17: For safety and stability, secure the anti-tip accessories (J) to the wall to prevent tipping, injury, and property damage. This involves attaching the bracket to the cabinet and then to the wall using appropriate fixings. A warning symbol ⚠️ indicates this important safety step.