WARM TIPS

ALLSTAND offers a lifetime warranty and please contact us for any quality issues.

Please read these warm tips before using our products:

1. Please ensure that all parts and hardware are available before beginning assembly. If there is any missing, please contact us.
2. Please strictly follow the instructions tips to use the correct type of screws and assembly steps, otherwise the product will be damaged.
3. About the drawer: please follow step 16 of the instructions to push the 2 pulleys tightly and slightly down into the drawer. If it is not smooth, please change the angle and try again.

Step 16

Diagram showing how to insert a drawer into a nightstand. The diagram includes a close-up of the drawer pulleys being inserted into the nightstand frame. An arrow indicates the direction of insertion. Another diagram shows the completed step with the drawer in place.

Step 16: Place the Step 5 drawer into Step 15.

4. For smoothly assembling step 3, please refer to the attached assembly procedure.

Step 3

Diagram illustrating Step 3 of the assembly process. It shows attaching part 'A' to part 'P' using screws. A close-up view highlights the connection points and the type of screws to be used (A x 4). The diagram also shows the overall structure of the nightstand being assembled.

Step 3: Use P to attach the A to the Step 2 hole to connect the part 9.

5. Please do not use power tools to assemble this product.

6. Some parts of the nightstand may have sharp edges, so please pay attention to scratches when installing.

How to contact us:

1. You can reply this email directly or contact the email below.
2. You can contact us through the after-sales email on the package box.
3. There is an after-sales email address on the manual, you can also contact us by this.

After-Sales Email: support@allstand.net