boAt Rockerz 335 Manual
Thank you for choosing boAt Rockerz 335. This manual guides you through the functionality of your wireless earphone neckband. Basic knowledge of Bluetooth and device connection is recommended for optimal usage.
To Pair with Bluetooth
- When switched off, press and hold the Multifunction Button (MFB) for 3 seconds to power on the earphones. They will automatically enter pairing mode, indicated by alternating blue and red LED flashes.
- Open Bluetooth on your device and search for "Rockerz 335" in the list of available devices.
- Select "Rockerz 335" and enter the pairing password "0000" if prompted to establish Bluetooth connectivity.
- Upon successful connection, the blue LED will flash twice every four seconds.
Note: The neckband will automatically turn off if no pairing is established within 5 minutes.
Functions
- Power on: When switched off, press and hold the MFB for 3 seconds. A voice prompt and alternating red/blue LED flashes will confirm.
- Power off: In any mode, press and hold the MFB for 5 seconds. A voice prompt and a 1-second red/blue LED flash will confirm before the device turns off.
- Play/Pause: Single tap the MFB to play or pause music.
- Volume up: Tap the "+" volume button to increase volume. A beep indicates maximum volume.
- Volume down: Tap the "–" volume button to decrease volume. A beep indicates minimum volume.
Specifications
| Feature | Specification |
|---|---|
| Bluetooth Version | V5.0 |
| Operating Range | 10m |
| Frequency | 20Hz~20000Hz |
| Driver Size | 10mm*2 Drivers |
| Battery | 150mAh |
| Talk time | Up to 30 hours |
| Music time | Up to 30 hours |
| Charging Time | About 40 Min |
| Charging Technology | ASAP Charge Technology |
| Charging Port | Type C |
| Driver Impedance | 1m |
| Sensitivity | 98dB ±3dB |
| Dual Pairing | Yes |
| Water Resistance | IPX5 |
To Charge
Use a USB Type C charging cable to charge the earphones via a laptop or adapter.
- Low Battery: When talk time is less than 10 minutes, a "low battery" prompt will sound, and the red LED will flash quickly.
- Charging: A solid red LED indicates the earphone is charging. The earphone cannot be turned on while charging.
- Fully charged: A solid blue LED indicates the earphone is fully charged.
Safety Precautions
- Do not dismantle the product or remove the battery yourself, as this may cause fire or electrical breakdown. Service should only be performed by qualified service providers or the manufacturer.
- Clean the earphones with a damp, soft cloth only. Avoid oily or volatile liquids. Keep earphones away from extreme temperatures.
- Damage not caused by manufacturing defects will void the product warranty.
- Do not use earphones when it is unsafe, such as while operating a vehicle, crossing a street, or in any situation requiring full awareness of your surroundings.
- To prevent hearing damage, ensure the volume on your music player is at an appropriate level before putting on the earphones. Exposure to noise levels at or above 85 dB can gradually lead to hearing loss.
Charging Norms & Precautionary Guidelines
- Charger/Brick/Adapter: 5V 2A
- Cable/Wire: Standard Cable (35 strands @0.10mm diameter/strand)
Other accessories can be paired with the product as long as their specifications meet the above norms.
