boAt Airdopes 383

What's in the Box

• 1x boAt Airdopes 383 Earbuds
• 1x Charging Case
• 1x USB Type-C Charging Cable
• 2x pairs of additional earmuffs (S & L)
• 1x User Manual

Power ON/OFF

First-time User Power ON

Take the Earbuds out of the Charging Case. Alternatively, to manually turn them on, press and hold the Capacitive Touch Control (CTC) for 3 seconds. The RED lights will blink 3 times.

Subsequent Usage Power ON

The earbuds will automatically power ON once taken out of the Charging Case, thanks to boAt's IWP (Insta Wake N' Pair) Technology. They will automatically connect to the previously paired device.

Note: If the earbuds don't automatically power on when taken out of the charging case:

1. Long press the CTC on both Right and Left earbuds for 3 seconds.
2. Wait for BLUE/RED LIGHTS on the left or right earbud, indicating Scan Mode.

Smart Power OFF

Your Earbuds will automatically power ON once taken out of the Charging Case. To power off:

1. After use, remove both left and right earbuds from your ear.
2. Place both earbuds back into the Charging Case.
3. A Red LED on the earbuds indicates they are charging.

Manual Power OFF

1. If both earbuds are on, long press the CTC on both left and right earbuds for 3 seconds to manually power off the Earbuds.
2. Place them back into the charging case to charge the earbuds.

Connection Mode

The earbuds are in stereo mode and connected to your Bluetooth device. To enter connection mode for the first time:

1. Take the Earbuds out of the Charging Case.
2. Wait for both Earbuds to automatically pair to each other. They will blink for 3 seconds and connect.
3. Turn on Bluetooth on your device and scan.
4. Search for "Airdopes 383" and pair accordingly. Enter the password "0000" if asked.

Congratulations, your earbuds are now connected successfully.

LED Indicators: For first-time pairing, BLUE/RED LIGHTS will blink on the left earbud. This indicates it has gone into Connection Mode. For subsequent pairings, BLUE/RED LIGHTS will blink on either the left or right earbud as they remember the device.

LED Indicators & Functionalities

LED Indicators:

• Manual Power ON/OFF: RED lights blink 3 times.
• Scan Mode: RED & BLUE lights blink.

Capacitive Touch Control (CTC) Functions:

• Play/Pause Music: Tap the CTC once.
• Answer/Hang up phone call: Tap the CTC once.
• Reject phone calls: Double tap the CTC.
• Activate Voice Assistant (Google/Siri): Press the CTC for 2 seconds. A Google/Siri Assistant screen will pop up, allowing you to command at ease.
• Next Track (Stereo Mode): Double click the right earbud's CTC.
• Previous Track (Stereo Mode): Double click the left earbud's CTC.

Note: Volume cannot be changed from the earbuds; it must be adjusted via the connected device. You cannot change tracks when in mono mode.

Single Earbud Use

Your earbuds are in stereo mode and connected to your Bluetooth device.

1. Simply remove either the right or left earbud from your ear.
2. Place the removed earbud back into the Charging Case.
3. Congratulations, you are now using mono/solo mode.

Note: There is no Master Earbud. Single Earbud Use can function on both Right/Left earbuds.

Charge The Earbuds

Place the boAt Airdopes 383 earbuds back into the charging case in their correct orientation.

A red light on the earbuds will indicate they are still being charged. This light will go off once the earbuds have been completely charged.

When both earbuds are fully charged, the carrying case will switch off to save power.

Charging Time: Approximately 1.5 hours for earbuds.

Charge The Case

Press the button on the charging case to indicate the battery level of your charging case.

To charge the case, plug in the USB cable and connect it to any USB port.

The circle LED will flash Blue when charging; after it is completely charged, the Blue light will stay on.

It will take approximately 1.5 hours to completely charge the case.

The earbuds can be charged a total of 3 times if the case is at full battery.

Charging Norms & Precautionary Guidelines:

• Charger/Brick/Adapter: 5V 2A
• Cable/Wire: Standard Cable (35 strands @0.10mm diameter/strand)

Warning: Please do not charge the carrying case with "9V" or "12V" output, as it may cause damage to the case.

Factory Reset / Solution

Perform the following steps if you encounter difficulties such as one side not working or earbuds not connecting to each other.

Perform A Factory Reset

1. Take the earbuds out of the charging case.
2. Triple tap the CTC touch button on both earbuds.
3. Red and blue LED lights will flash rapidly to indicate a successful reset.
4. Wait for both earbuds to pair with each other, indicated by a blue LED lighting for 0.5 seconds.

Congratulations, your device is reset and ready to pair.

Note: Ensure that your charging case and earbuds have sufficient battery to perform a factory reset.

Common Problems & Solutions

• Problem: If one side is working only.
  Solution: Simply put back both earbuds in the case and take them out again, or perform "Factory Reset".
• Problem: If Earbuds are not in scan mode.
  Solution: Perform "Factory Reset".

Troubleshooting

Note: To switch to stereo mode, simply take the earbud (L/R) out of the case & place it in your ear. The earbud will automatically power on & pair with each other, enabling stereo usage.

Specifications

Cautions

1. Please consider this manual as your map. Knowledge of Bluetooth and device connection is essential for the operation of this product. Therefore, we strongly advise that this manual is thoroughly read before beginning use, and referred to when in times of difficulty.
2. Please do not let the earbuds come into contact with sharp edges, uneven surfaces, and metal parts, in a manner that can lead to some form of permanent external or internal damage.
3. Please do not dismantle the product in any way, as it can lead to a fire or electrical breakdown and even completely damage the product. As this is extremely unsafe, we ask that any maintenance or servicing of the headphones is done only through a qualified service provider/manufacturer.
4. Please do not remove the battery by yourself; this is a task meant to be managed by a service provider/manufacturer. Replacing the current battery with an ill-fitting set can result in a fire or electric hazard, therefore it is strongly advised against.
5. Please clean the earbuds with the utmost of care using only a damp soft cloth, if cleaning is required. Please do not use any oily volatile liquid. In addition, ensure that the Headsets are kept away from extremely hot or cold substances.
6. To avoid damage to your hearing, make sure that the volume on your music player is at an appropriate level when you are plugging into Nirvana. After wearing the earbuds, gradually turn up the volume until you reach a comfortable listening level. Exposure to any noise levels at or above 85 dB can gradually lead to a loss of hearing. Therefore, listening sessions at higher volumes should not be for too long. If you are planning to use the earbuds for extended periods of time, it is safer to keep the volume at a low level.
7. Any damage to the earbuds that is NOT a manufacturing issue will make the product's warranty null and void. Please take the greatest care of your headphones to ensure that no such occurrences take place.
8. Do not use earbuds when it is unsafe to be wearing them, such as while operating a vehicle, crossing a street, or during any activity where full awareness of your surroundings is required. This is because it is dangerous to drive while wearing headphones as it decreases your ability to hear sounds like another car's horn or an emergency vehicle's sirens. Therefore, please avoid wearing your Headsets while driving.

Advisable

The earbuds will start at a 100% volume, and may need to be reduced when first switched on. This can be done using the volume control on your Bluetooth device before use.