Citizen P990 Smartwatch Quick Start Guide

Attaching the Band to the Watch

Follow these steps to attach the band to your watch:

Step 1: Locate the release pin on the watch lug. Push the pin inwards to release the band.

Step 2: Align the new band with the watch lugs. Insert the spring bar into the lug hole and release the pin to secure the band.

CAUTION:

• Be careful not to hurt your thumbs or fingers when attaching the band.
• Avoid damaging the watch and the band.
• After attaching the band, ensure it is securely fastened by pushing and pulling it back and forth. If not securely attached, the watch may fall and be damaged.

Removing the Band from the Watch

Follow these steps to remove the band from your watch:

Step 1: Locate the release pin on the watch lug. Push the pin inwards to release the band.

Step 2: Gently pull the band away from the watch case.

Charging and Powering On

Connect your smartwatch to the included charging cord. Once it automatically turns on, tap the screen to begin and choose your language.

• Keep your smartwatch charging during pairing and setup.
• WARNING: To avoid damage to your watch, only use the included charger.
• Do not use a USB hub, USB splitter, USB y-cable, battery pack, or other peripheral device to charge.

Download and Pair

On your phone, enable Bluetooth™. Then, download the Wear OS by Google™ app from the App Store™ or Google Play store. Open the app and follow the on-screen instructions to pair.

Once paired, your smartwatch will provide an interactive tutorial.

Compatibility: Wear OS by Google works with phones running Android 6.0+ (excluding Go edition) or iOS 12+. Supported features may vary between platforms and countries.

Trademarks: Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Wear OS by Google and Google Play are trademarks of Google LLC.

For additional information, visit: https://www.citizenwatch-global.com/support/html/en/p990/p990.html