CITIZEN P990
Quick Start Guide
Attaching the band to the watch
The diagram illustrates how to attach a watch band. Step 1 shows a close-up of the watch lug and band connection point, indicating a pin mechanism that needs to be pushed to secure the band. Step 2 shows the band links and the watch case, with arrows demonstrating the insertion and securing of the pin to attach the band.
CAUTION:
- When attaching the band, be careful not to hurt your thumbs or fingers. Also, take care not to damage the watch and the band.
- After attaching the band, make sure it is fit firmly to the watch body by pushing and pulling it back and forth. If it is not fixed securely, the watch may fall down and get damaged.
Removing the band from the watch
The diagram illustrates how to remove a watch band. Step 1 shows a close-up of the watch lug and band connection point, indicating a pin mechanism that needs to be pressed to release the band. An arrow shows the direction to press the pin. Step 2 shows the band being pulled away from the watch case after the pin has been released.
1. CHARGE AND POWER ON
The diagram shows a smartwatch connected to its charging cord. The charging puck, which has a lightning bolt symbol ⚡, connects magnetically to the back of the watch. The charging cable connects to a power source (implied).
Connect your smartwatch to the included charging cord. Once it automatically turns on, tap the screen to begin and choose your language.
- Keep your smartwatch charging during pairing and setup.
- WARNING: To avoid damage to your watch, only use with the included charger.
- Do not use a USB hub, USB splitter, USB y-cable, battery pack or other peripheral device to charge.
2. DOWNLOAD AND PAIR
The diagram shows a smartphone displaying the "Wear OS by Google" interface. Below the phone are buttons/links to download the app from the "App Store" and "Google Play".
On your phone, enable Bluetooth™, then download the Wear OS by Google™ app from the App Store™ or Google Play store. Open the app and follow the onscreen instructions to pair. Once paired, your smartwatch will give you an interactive tutorial.
- Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc.
- Wear OS by Google and Google Play are trademarks of Google LLC.
Wear OS by Google works with phones running Android 6.0+ (excluding Go edition) or iOS 12+. Supported features may vary between platforms and countries.
Visit https://www.citizenwatch-global.com/support/html/en/p990/p990.html for additional information.