User's Guide for CITIZEN ECO-DRIVE Proximity
Refer also to the instruction manual of the watch when registering and connecting with the watch.
Connecting for the first time (Pairing)
Operation is required on both the watch and the iPhone.
Set the mode of the watch to PR when Scan is [toggle switch set to 'I' (on)] on the screen of the app. Indication changes to Proximity Connect when pairing completed successfully.
A diagram shows the app interface with a 'Scan' toggle set to 'I' (on). Below this, a diagram of the Citizen Eco-Drive watch is shown with the mode dial indicating 'PR'. Below the watch diagram is an app interface element labeled 'Proximity Connect' with a toggle set to 'I' (on).
Stopping the notification indication
Press and hold either the lower right button A or upper right button B for two seconds while the second hand indicates a notification (CALL/INFO*/LL). The second hand stops the notification indication and returns to the normal movement.
A diagram shows the Citizen Eco-Drive watch. Red arrows point to the lower right button (labeled A) and the upper right button (labeled B). A label 'CALL/INFO*/LL' points to the second hand, indicating its position during a notification.
* "MAIL" is used instead of "INFO" on some models.
Disconnecting
Both the watch and the iPhone can disconnect the other.
Set Proximity Connect to [toggle switch set to 'O' (off)] on the screen of the app.
Press and hold the upper right button B for 7 seconds or set the mode to DCT to disconnect the iPhone from the watch.
Two diagrams of the Citizen Eco-Drive watch are shown. The left diagram shows the watch crown with the mode selector pointing to 'TME/L-TM/ PR/CT', indicated by a red arrow. The right diagram shows the watch crown with the mode selector pointing to 'DCT', indicated by a blue label.
Reconnecting (1/2)
Operation is required on both the watch and the iPhone.
Press and hold the upper right button B for 2 seconds or set the mode to CT when Scan or Waiting for Reconnection is [toggle switch set to 'I' (on)] on the screen of the app.
Diagrams show app toggles 'Scan' and 'Waiting for Reconnection', both set to 'I' (on). Below, diagrams of the Citizen Eco-Drive watch are shown. The left shows the watch crown with the mode selector pointing to 'TME/L-TM/ PR/CT', indicated by a red arrow. The right shows the watch crown with the mode selector pointing to 'CT', indicated by a blue label.
Reconnecting (2/2)
When reconnecting is unsuccessful
Set Scan to [toggle switch set to 'O' (off)] and try the reconnecting procedure again.
A diagram shows the app interface with a 'Scan' toggle set to 'O' (off).
Maximum continuous connection time
When the connection between this watch and your iPhone continues for six hours, it will be disconnected automatically.
Functions (1/5)
Time Sync
Time and calendar info of the iPhone is transmitted to the watch to synchronize their time and calendar.
The watch can receive time and calendar info during connection by pressing the lower right button A for 2 seconds.
A diagram shows the Citizen Eco-Drive watch. A red arrow points to the lower right button (labeled A). A label 'TME/L-TM/ PR/CT' points to the watch crown, indicating the current mode.
Functions (2/5)
Incoming Call [CALL]
The iPhone notifies the watch of incoming calls and the second hand points CALL on the watch.
Functions (3/5)
Mail and Schedule Alerts [INFO*]
Schedule Alert
The iPhone sends the schedule alerts set on the built-in Calendar app to the watch and the second hand points INFO* on the watch.
- For iOS6: To use the Schedule Alert, turn on Calendars access for this app in the Privacy setting.
* "MAIL" is used instead of "INFO" on some models.
Functions (4/5)
Mail and Schedule Alerts [INFO*]
Email Alert
The iPhone sends new mail info to the watch and the second hand points INFO* on the watch.
Set a mail account on this app to use the function.
* "MAIL" is used instead of "INFO" on some models.
Functions (5/5)
Bluetooth Link Loss Alert [LL]
The watch alerts when disconnected with iPhone suddenly and the second hand points LL.
iPhone Search
The watch sends a signal to the iPhone and the iPhone sounds in the way when it receives a call.
Press the lower right button A and the upper right button B simultaneously.
A diagram shows the Citizen Eco-Drive watch. Red arrows point to the lower right button (labeled A) and the upper right button (labeled B). A label 'TME/L-TM/ PR/CT' points to the watch crown.
Setting Email accounts (1/5)
Register mail accounts to use. This app only checks existence of new and unread mails. This function is only available for IMAP-compatible mail accounts.
Preparing mail account info
Prepare mail address, password, user name, address of IMAP server, port No. etc. of the account to register. Some kinds of mail accounts require only their mail addresses and passwords for registering.
Setting Email accounts (2/5)
Registering the mail account
- Tap Mail Accounts on the screen of the app.
- Tap +.
- Tap a mail service you use when it is on the list and enter your mail address, password and name on the next screen. Tap Other when your mail service is not listed and enter all items required on the next screen.
- Tap Done to finish registration.
Setting Email accounts (3/5)
Setting frequency of new mail checking
- Tap Polling Interval on the mail setting screen of the app.
- Select a checking interval.
Stopping unread-mail check temporarily
Set Email Alerts to [toggle switch set to 'O' (off)] to suspend checking of all of your mail accounts. You can set [toggle switch set to 'I' (on)]/[toggle switch set to 'O' (off)] separately for each mail account.
Setting Email accounts (4/5)
Using the Email alert without WiFi while traveling abroad
Set Data Roaming on your iPhone to [toggle switch set to 'I' (on)] to receive emails. Roaming service is available at an additional cost. When Data Roaming is set to [toggle switch set to 'O' (off)], the Email alert does not work.
Setting Email accounts (5/5)
This section appears to be missing from the provided OCR, but the numbering suggests there might be a page 16.
