Altec Lansing IMW1300 HydraBlast Everythingproof Wireless Speaker

In the Box

Your Altec Lansing IMW1300 package includes:

• IMW1300 HydraBlast Wireless Speaker
• USB-C Charging Cable
• Carabiner

A Closer Look

Familiarize yourself with the speaker's features:

• Power Button: Turns the speaker on/off.
• USB-C Charging Port: For charging the speaker.
• Link Button: Used for True Wireless Pairing.
• Color Change Button: Controls the light modes.
• Volume Down/Previous Track Button: Decreases volume or skips to the previous track.
• Volume Up/Next Track Button: Increases volume or skips to the next track.

Charging

Speaker Charging: Connect the USB-C cable to the speaker and a power source. The LED indicator will be red while charging and turn off when fully charged (approx. 3-4 hours for a full charge).

Wireless Charging: Place a Qi-compatible device on the wireless charging pad. Ensure correct positioning and remove any phone covers. Note: If the speaker volume is above 50% during Qi charging, it will be automatically reduced to 50% to conserve battery.

Powering On/Bluetooth Pairing

Powering On: Press the Power Button.

Bluetooth Pairing:

1. Turn on the speaker.
2. On your Bluetooth-compatible device, search for "Altec Lansing" and select it to pair. The LED indicator will be solid blue when connected.

Disconnect Bluetooth: Press and hold the Power Button for five seconds. The speaker will beep.

Reset All Connections: Press and hold the Power Button for ten seconds. The speaker will power off.

Speaker Controls

• Volume Up/Down: Press the '+' or '-' buttons.
• Next/Previous Track: Press and hold the '+' or '-' buttons respectively.
• Play/Pause: Press the Play/Pause button.
• Answer & End Call: Press the Play/Pause button.
• Reject Incoming Call: Press and hold the Play/Pause button for 2 seconds.
• Just Ask / Reset: Press and hold the Power Button for 1-2 seconds to activate voice assistant (Siri or Google Assistant).

True Wireless Pairing

To pair two IMW1300 speakers for a stereo experience:

1. Turn on both speakers.
2. On the first speaker, press and hold the Link Button for 2-3 seconds.
3. Turn on the second speaker and press the Link Button.
4. The Link Buttons will illuminate green, indicating the speakers have paired together. The first speaker will show a solid blue light, and the second speaker will flash green while in pairing mode.

Disconnect TWS function: Power off one of the units.

Light Change Mode

Press and hold the Color Change Button for 1-2 seconds to cycle through the different light modes:

• Multicolor slow transition
• Single color pulse to music
• Multi color pulse to music
• Single color slow fade
• Single color
• Multicolor cycle changed
• Multicolor fast changed with background color
• Multicolor slow fade
• Four color slow fade
• Four color rotation with pulse to music
• Four color rotation
• Off

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Troubleshooting & Information

Overall battery performance varies dependent upon use setting, and environmental conditions. For further information, please visit www.alteclansing.com.

Manufacturer Information:

Sakar International Inc.
195 Carter Drive
Edison, New Jersey 08817, USA
855-292-4087
www.alteclansing.com