Altec Lansing HydraOrbit IMW1051 Wireless Speaker

Important Information

IMPORTANT: PLEASE DO NOT RETURN TO STORE

If you are having trouble, Altec Lansing is here to help. Call 24/7 at 1-855-292-4087 or email support@alteclansing.com. Visit alteclansing.com for assistance.

REGISTER YOUR PRODUCT

Register your product at alteclansingsupport.com to receive news, exclusive deals, OTA or firmware updates, and warranty information.

Welcome

Thank you for purchasing an Altec Lansing product. Altec Lansing aims for customer satisfaction. Share your experience with their customer concierge.

Follow Altec Lansing on social media:

• Facebook: @alteclansingofficial
• Instagram: @alteclansing
• Twitter: @alteclansingofficial

Warranty: 12 Month Limited Warranty from the date of original purchase.

Customer Support: 24 Hour Customer Support available at 1.855.292.4087 or alsupport@sakar.com. Visit www.alteclansing.com.

In the Box

• HydraOrbit Everythingproof™ Wireless Speaker (IMW1051)
• USB-C Charging Cable
• IMW1050 HydraOrbit Everythingproof™ Wireless Speaker
• LED Indicator Light
• Model Number: IMW1050U-230921

A Closer Look

Speaker Controls

• Power Button/Answer Calls/Voice Assistant: Press and hold for 2 seconds to turn ON/OFF. Press to Play/Pause music, Answer/End calls. Press and hold to ignore incoming calls.
• Volume Up/Next Track: Press to increase volume. Press and hold for the next track.
• Volume Down/Previous Track: Press to decrease volume. Press and hold for the previous track.
• Link Button: Used for True Wireless Pairing.
• Strap
• Charging Port
• Reset Button

LED Indicator Light

• Charging (red): The device is charging.
• Charging Complete (off): Charging is complete.
• Battery Warning: Flashes red 3 times when power is low.
• Pairing Mode (Blue Flashing LED): Press and hold the power button for 1-2 seconds to enter pairing mode.
• Bluetooth Paired (Solid Blue LED): Device is successfully connected via Bluetooth.
• True Wireless Pairing (Flashing Green): Pairing with a second speaker.
• True Wireless Paired (Solid Green): TWS connection established.

Getting Started

Powering On/Off

Press and hold the power button for 2 seconds.

Bluetooth Pairing

Press and hold the power button for 1-2 seconds until the LED flashes blue. Select "AL HydraOrbit" from your device's Bluetooth list.

True Wireless Pairing

1. Turn on the first speaker and connect it with a Bluetooth-compatible device.
2. Turn on the second speaker and press the link button (•○•○•) on that speaker.
3. Press and hold the link button for 2-3 seconds on the first speaker. The speakers will connect to each other.
4. The indicator LEDs will illuminate green when paired.
5. To end TWS, press and hold the power button on either speaker.

Note: This speaker can also pair with IMW1000 Hydra Mini, IMW1020 HydraMicro, and IMW1100 HydraMotion using True Wireless Pairing.

Using Your Speaker

Voice Assistant

When connected to your phone, double-press the power button (Press x2) to activate Siri or Google Assistant.

Answering Calls

• Answer/End Call: Press the power button.
• Ignore Call: Press and hold the power button.

Volume & Track Control

• Volume Up: Press the Volume Up button.
• Next Track: Press and hold the Volume Up button.
• Volume Down: Press the Volume Down button.
• Previous Track: Press and hold the Volume Down button.

Reset

• Disconnect Bluetooth: Press and hold the power button for five seconds until the speaker beeps.
• Reset All Connections: Press and hold the power button for ten seconds. The speaker will power off, and all pairing information will be reset. Blue and red lights will flash while resetting.

Specifications

• Battery: 3.7V/1500mAh
• Charging Voltage: 5V
• Charging Current: 350mA
• Bluetooth Version: V5.0
• Bluetooth Range: ≥10m or 33ft
• Waterproof Rating: IPX7
• Charging Time: Approx. 5 Hours
• Play Time: Approx. 10 Hours* (When volume is played at 50% or lower)

*Overall battery performance varies depending on use setting and environmental conditions. For further information, please visit www.alteclansing.com.

Follow Us

Social Media:

• Facebook: @alteclansingofficial
• Instagram: @alteclansing
• Twitter: @alteclansingofficial

Hashtag: #myalteclansing

Compliance Information

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Manufacturer/Distributor:

Sakar International Inc.
195 Carter Drive
Edison, New Jersey 08817, USA
855-292-4087
www.alteclansing.com