Altec Lansing HydraMini IMW1000

Everythingproof TM Wireless Speaker

QUICK START GUIDE

Register Your Product

To receive news, exclusive deals, warranty information, and firmware updates, please register your product at alteclansingsupport.com.

A Closer Look

LED Indicator Light: Indicates charging status and Bluetooth pairing mode.

Power Button: Turns the speaker on/off and activates voice assistant.

Color Change Button: Cycles through different light modes.

Volume Down/Previous Track: Press to decrease volume, press and hold for previous track.

Volume Up/Next Track: Press to increase volume, press and hold for next track.

Reset: Resets the speaker's connections.

Charging Port: USB-C port for charging the device.

Hanging Port: For attaching a carabiner.

Charging

Indicator Light: Red light indicates charging. Light off indicates charging complete.

Full Charge Time: 2-3 Hours.

Powering On / Bluetooth Pairing

To Power On: Press and hold the Power Button for 1-2 seconds.

Pairing Mode: The LED indicator will flash blue.

Connected: The LED indicator will be solid blue when connected to a device named 'AL HydraMini'.

True Wireless Pairing

Turn on the first speaker and connect it with a Bluetooth compatible device.
Turn on the second speaker and press the button on that speaker for 1-2 seconds.
Press and hold the button for 2-3 seconds on the first speaker. The first speaker will now connect to the second speaker so they both play in sync. The Link Buttons will illuminate green.

To end TWS pairing, press and hold the power button on the speaker.

Light Change Mode

Press the Color Change Button to toggle between different light modes:

1. Multicolor slow transition
2. Single color pulse to music
3. Multicolor pulse to music
4. Single color slow fade
5. Single color
6. Multicolor cycle changed
7. Multicolor fast changed with background color
8. Multicolor slow fade
9. Four color slow fade
10. Four color rotation with pulse to music
11. Four color rotation
12. Off

Press and hold the button for 1-2 seconds to change the Strobe light modes.

Speaker Controls

Press '+': Volume Up

Press '-': Volume Down

Press Play/Pause: Play/Pause Music, Answer & End Call

Press & Hold (2 sec) '+': Next Track

Press & Hold (2 sec) '-': Previous Track

Press & Hold (2 sec) Power Button: ON/OFF

Press & Hold Power Button: Reject Incoming Call

Voice Assistant / Reset

To activate Voice Assistant: Press the Power Button to activate Siri or Google Assistant.

Reset:

Disconnect Bluetooth: Press and hold the Power Button for five seconds; the speaker will beep.
Reset All Connections: Press and hold the Power Button for ten seconds; the speaker will power off.

In the Box

USB-C Charging Cable
IMW1000 HydraMini Everythingproof TM Wireless Speaker
Carabiner

FCC Compliance Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Manufacturer Information

Sakar International Inc. 195 Carter Drive Edison, New Jersey 08817, USA 855-292-4087 www.alteclansing.com

	Altec Lansing HydraMini IMW1000: Quick Start Guide Get started with your Altec Lansing HydraMini Everythingproof TM Wireless Speaker (IMW1000). This guide covers setup, pairing, controls, and features for optimal use.
	Altec Lansing HydraMini 2.0 EVERYTHINGPROOF® Wireless Speaker Quick Start Guide and Warranty Information This document provides a quick start guide, product overview, and warranty information for the Altec Lansing HydraMini 2.0 EVERYTHINGPROOF® Wireless Speaker (Model IMW1002). Learn about setup, controls, features, and safety precautions.
	Altec Lansing HydraBlast 2.0 EVERYTHINGPROOF Wireless Speaker Quick Start Guide Quick start guide for the Altec Lansing HydraBlast 2.0 EVERYTHINGPROOF Wireless Speaker, covering setup, charging, Bluetooth pairing, controls, safety precautions, specifications, and warranty information.
	Altec Lansing HydraOrbit IMW1051 Wireless Speaker Quick Start Guide A comprehensive guide to setting up and using the Altec Lansing HydraOrbit IMW1051 Everythingproof Wireless Speaker, including pairing instructions, controls, and specifications.
	Altec Lansing HydraWave EVERYTHINGPROOF Wireless Speaker (IMW1032) - User Manual & Quick Start Guide Comprehensive guide for the Altec Lansing HydraWave EVERYTHINGPROOF Wireless Speaker (Model IMW1032), covering setup, charging, Bluetooth pairing, controls, safety, specifications, and warranty information. Learn how to get the most out of your device.
	Altec Lansing HydraMicro Everythingproof Wireless Speaker Quick Start Guide A concise guide to setting up and using your Altec Lansing HydraMicro Everythingproof Wireless Speaker (IMW1021/IMW1020), covering Bluetooth pairing, True Wireless Stereo (TWS) connection, speaker controls, call management, charging, specifications, and FCC compliance.
	Altec Lansing IMW1400 HydraBoom Wireless Speaker Quick Start Guide A quick start guide for the Altec Lansing IMW1400 HydraBoom Everythingproof™ Wireless Speaker, covering setup, controls, Bluetooth pairing, True Wireless Stereo pairing, and light modes.
	Altec Lansing IMW1200 HydraJolt Everythingproof Wireless Speaker Quick Start Guide Quick start guide for the Altec Lansing IMW1200 HydraJolt Everythingproof Wireless Speaker, covering setup, pairing, controls, and features.