Altec Lansing IMW1400 HydraBoom Everythingproof™ Wireless Speaker
Quick Start Guide
Important Information
PLEASE DO NOT RETURN TO STORE
If you're having trouble, Altec Lansing is here to help!
Call us 24/7 at 1-855-292-4087
E-mail us at support@alteclansing.com or visit us at alteclansing.com
Register Your Product
To receive news, exclusive deals, OTA or firmware updates, warranty information and more, please register your product at alteclansing.com/support.
ALTEC LANSING
Welcome
Thank you for purchasing an Altec Lansing product. It's our goal to make sure you are happy. Share your happiness with our customer concierge.
Follow us:
- Facebook: @alteclansingofficial
- Instagram: @alteclansing
- Twitter: @alteclansing
Warranty & Support
12 Month Limited Warranty
All Altec Lansing products come with a 12-month limited warranty from the date of its original purchase.
24 Hour Customer Support
Altec Lansing loves its customers and cares about your experience. If you need assistance, please call us at 1.855.292.4087 or e-mail support@alteclansing.com.
In the Box
- Wall Charger
- USB-C Charging Cable
- HydraBoom Everythingproof™ Wireless Speaker (IMW1400)
A Closer Look
Speaker Controls:
- Answer & End Calls / Volume Up / Next Track: Press the '+' button.
- Voice Assistant: Press the '+' button.
- Volume Down / Previous Track: Press the '-' button.
- Color Changing Button: Press the 'Light Change' button.
- Link Button: Used for True Wireless Stereo pairing.
Ports:
- USB Port: For charging devices.
- Charging Port: For charging the speaker.
- Power Button: Press and hold for 1-2 seconds to turn on/off.
Charging Indicator
- Red light: Charging
- Light off: Charging complete
Full Charge Time: Approximately 3-4 hours.
Powering On & Bluetooth Pairing
Powering On: Press and hold the Power Button for 1-2 seconds.
Bluetooth Pairing:
- Pairing Mode: Flashing blue light indicates the speaker is ready to pair.
- Paired: Solid blue light indicates a successful connection.
Speaker Controls Detailed
- Power ON/OFF: Press & Hold (2 sec)
- + Volume Up: Press
- + Next Track: Press & Hold
- - Volume Down: Press
- - Previous Track: Press & Hold
- Play/Pause: Press
- Answer & End Call: Press
- Reject Incoming Call: Press & Hold (2 sec)
- Voice Assistant (Siri or Google Assistant): Press the '+' button.
- Reset: Press & Hold the Power Button.
- Disconnect Bluetooth: Press and hold the Power Button for five seconds; the speaker will beep.
- Reset All Connections: Press and hold the Power Button for ten seconds; the speaker will power off.
True Wireless Pairing (TWS)
To pair two HydraBoom speakers:
- Turn on the first speaker and connect it with a Bluetooth-compatible device.
- Turn on the second speaker and press the Link Button on that speaker.
- Press and hold the Link Button for 2-3 seconds on the first speaker. The first speaker will connect to the second, and they will play in sync. The Link Buttons will illuminate green.
- To end TWS, press and hold the Power Button on either speaker.
TWS Modes:
- Mode 1: Dual Stereo - Both speakers play in stereo for parties, etc.
- Mode 2: Wide Stereo - One speaker plays the left channel, and the other plays the right channel.
Briefly press the Link Button to switch between modes.
Light Change
Press and hold the Light Change button for 1-2 seconds to toggle between different light modes:
- Multicolor slow transition
- Single color pulse to music
- Multicolor fast changed with background color
- Multicolor slow fade
- Single color slow fade
- Single color
- Multicolor cycle changed
- Four color slow fade
- Four color rotation with pulse to music
- Four color rotation
- Blink
- Off
Listening Modes
The speaker will automatically switch modes based on its position (horizontal or vertical).
- Horizontal Mode: [Left Channel] - [Right Channel]
- Vertical Mode: [Left Channel] - [Right Channel]
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Manufacturer Information
Sakar International Inc.
195 Carter Drive
Edison, New Jersey 08817, USA
