Safety Instructions
- Do not exceed the permitted load for the vehicle's load carrier when loading the basket.
- Distribute the load as uniformly as possible.
- Put heavy objects in the back of the basket.
Symbols
- ? Read the instructions.
- CE Approved in accordance with the relevant directives.
Technical Data
| Size | 1040 x 750 x 160 mm |
| Weight | 15.8 kg |
Description
- 1. Basket
- 2. Bracket
- 3. Screw M6 x 80
- 4. Washer Ø 6
- 5. Nyloc nut M6
- 6. Load carrier (sold separately)
Figure 1: Illustration of the Hamron Rear Cargo Basket for ATVs, showing its structure and components including the basket, brackets, screws, washers, and nyloc nuts.
Assembly
1. Place the basket in the centre of the load carrier and fit the upright part of the load carrier through the opening in the basket.
NOTE: Depending on the type of load carrier, it may be necessary to remove the upright part to mount the basket.
2. Lock one corner of the basket to the load carrier with 2 brackets, 2 screws M6 x 80, 4 washers, and 2 nyloc nuts. Check that the bracket over the basket fits over the square tube in the basket frame and that the screws are placed on each side of the tube.
NOTE: The bracket deforms when the screws are tightened.
Figure 2: Diagram illustrating the mounting of a corner bracket for the cargo basket. It shows the bracket fitting over the ATV's load carrier square tube and being secured with screws, washers, and nuts.
3. Repeat step 2 for the other three corners. Place the brackets evenly spaced over the surface of the basket. Check that the basket is mounted straight and is firmly fixed. Tighten the brackets if necessary.
